--
-- All Rights Reserved, Copyright (c) 2013, 2014, ALAXALA Networks Corp.
--
-- AX-OSPF-MIB.my: axOspf group MIB file.
--

AX-OSPF-MIB DEFINITIONS ::= BEGIN

    IMPORTS
        MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
         Counter32, Gauge32, Integer32, IpAddress           FROM SNMPv2-SMI
        TEXTUAL-CONVENTION, RowStatus                       FROM SNMPv2-TC
        MODULE-COMPLIANCE, OBJECT-GROUP,
        NOTIFICATION-GROUP                                  FROM SNMPv2-CONF
        axMib                                               FROM AX-SMI-MIB;

axOspf MODULE-IDENTITY
    LAST-UPDATED    "201412030000Z"
    ORGANIZATION    "ALAXALA Networks Corp."
    CONTACT-INFO    "ALAXALA Networks Corp."
    DESCRIPTION
            "The MIB module for the Multi-backbone OSPF.
             This MIB module is based on a part of the standard MIB defined in RFC 4750."
    REVISION        "201412030000Z"
    DESCRIPTION
        "To support area scope (type-10) LSAs, the enumeration areaOpaqueLink (10) was added to axOspfLsdbType in the axOspfLsdbTable."
    REVISION        "201310030000Z"
    DESCRIPTION
        "Updated header comment."
    REVISION        "201306280000Z"
    DESCRIPTION
        "Initial release."
    ::= { axMib 14 }

--
-- Textual Conventions
--
InterfaceIndexOrZero ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "d"
    STATUS       current
    DESCRIPTION
            "This textual convention is an extension of the
            InterfaceIndex convention.  The latter defines a greater
            than zero value used to identify an interface or interface
            sub-layer in the managed system.  This extension permits the
            additional value of zero.  the value zero is object-specific
            and must therefore be defined as part of the description of
            any object which uses this syntax.  Examples of the usage of
            zero might include situations where interface was unknown,
            or when none or all interfaces need to be referenced."
    SYNTAX       Integer32 (0..2147483647)

Status ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "d"
    STATUS       current
    DESCRIPTION
            "This textual convention is an extension of the
            InterfaceIndex convention.  The latter defines a greater
            than zero value used to identify an interface or interface
            sub-layer in the managed system.  This extension permits the
            additional value of zero.  the value zero is object-specific
            and must therefore be defined as part of the description of
            any object which uses this syntax.  Examples of the usage of
            zero might include situations where interface was unknown,
            or when none or all interfaces need to be referenced."
    SYNTAX       Integer32 (0..2147483647)

--
-- MIB groups
--

axOspfTrap  OBJECT IDENTIFIER ::= {axOspf 16}
axOspfTraps OBJECT IDENTIFIER ::= {axOspfTrap 2}

--
-- axOspfGeneralTable
--

axOspfGeneralTable OBJECT-TYPE
    SYNTAX SEQUENCE OF AxOspfGeneralEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The table of OSPF information."
    ::= {axOspf 1}

axOspfGeneralEntry OBJECT-TYPE
    SYNTAX AxOspfGeneralEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The entry of OSPF information."
    INDEX { axOspfGeneralDomainNumber }
    ::= {axOspfGeneralTable 1}

AxOspfGeneralEntry ::= SEQUENCE {
    axOspfGeneralDomainNumber    Integer32,
    axOspfRouterId               IpAddress,
    axOspfAdminStat              Status,
    axOspfVersionNumber          INTEGER,
    axOspfAreaBdrRtrStatus       INTEGER,
    axOspfASBdrRtrStatus         INTEGER,
    axOspfExternLsaCount         Gauge32,
    axOspfExternLsaCksumSum      Integer32,
    axOspfTOSSupport             INTEGER,
    axOspfOriginateNewLsas       Counter32,
    axOspfRxNewLsas              Counter32,
    axOspfExtLsdbLimit           Integer32,
    axOspfMulticastExtensions    Integer32
}

axOspfGeneralDomainNumber OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Domain number in the Autonomous System."
    ::= {axOspfGeneralEntry 1}

axOspfRouterId OBJECT-TYPE
    SYNTAX IpAddress
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "A integer uniquely identifying the router in the Autonomous System."
    ::= {axOspfGeneralEntry 2}

axOspfAdminStat OBJECT-TYPE
    SYNTAX Status
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The  administrative  status  of  OSPF  in  the router."
    ::= {axOspfGeneralEntry 3}

axOspfVersionNumber OBJECT-TYPE
    SYNTAX INTEGER {
                       version(2)
                   }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The current version number of the OSPF protocol is 2."
    ::= {axOspfGeneralEntry 4}

axOspfAreaBdrRtrStatus OBJECT-TYPE
    SYNTAX INTEGER {
                       true(1),
                       false(2)
                   }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "A flag to note whether this router is an area border router."
    ::= {axOspfGeneralEntry 5}

axOspfASBdrRtrStatus OBJECT-TYPE
    SYNTAX INTEGER {
                       true(1),
                       false(2)
                   }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "A flag to note whether this router is  configured as an Autonomous System border router."
    ::= {axOspfGeneralEntry 6}

axOspfExternLsaCount OBJECT-TYPE
    SYNTAX Gauge32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The number of external (LS type 5)  link-state advertisements in the link-state database."
    ::= {axOspfGeneralEntry 7}

axOspfExternLsaCksumSum OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The 32-bit unsigned sum of the LS checksums of the  external  link-state  advertisements  contained in the link-state  database."
    ::= {axOspfGeneralEntry 8}

axOspfTOSSupport OBJECT-TYPE
    SYNTAX INTEGER {
                       true(1),
                       false(2)
                   }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The router's support for type-of-service routing. This value of false(2)."
    ::= {axOspfGeneralEntry 9}

axOspfOriginateNewLsas OBJECT-TYPE
    SYNTAX Counter32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The number of  new  link-state  advertisements that have been originated."
    ::= {axOspfGeneralEntry 10}

axOspfRxNewLsas OBJECT-TYPE
    SYNTAX Counter32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The number of  link-state  advertisements  received determined  to  be  new instantiations."
    ::= {axOspfGeneralEntry 11}

axOspfExtLsdbLimit OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The maximum number of non-default AS-external-LSAs entries that can be stored in the link-state database.
         If the value is -1,  then there is no limit. This value is -1"
    ::= {axOspfGeneralEntry 12}

axOspfMulticastExtensions OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "A Bit Mask indicating whether  the  router  is forwarding  IP  multicast  (Class  D) datagrams based on the algorithms defined in  the  Multicast Extensions to OSPF."
    ::= {axOspfGeneralEntry 13}

--
-- axOspfAreaTable
--

axOspfAreaTable OBJECT-TYPE
    SYNTAX SEQUENCE OF AxOspfAreaEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The router's support for demand routing."
    ::= { axOspf 2 }

axOspfAreaEntry OBJECT-TYPE
    SYNTAX AxOspfAreaEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "This entry contain ospf area information."
    INDEX { axOspfAreaDomainNumber, axOspfAreaId }
    ::= {axOspfAreaTable 1}

AxOspfAreaEntry ::= SEQUENCE {
    axOspfAreaDomainNumber    Integer32,
    axOspfAreaId              IpAddress,
    axOspfAuthType            INTEGER,
    axOspfImportAsExtern      INTEGER,
    axOspfSpfRuns             Counter32,
    axOspfAreaBdrRtrCount     Gauge32,
    axOspfAsBdrRtrCount       Gauge32,
    axOspfAreaLsaCount        Gauge32,
    axOspfAreaLsaCksumSum     Integer32,
    axOspfAreaSummary         INTEGER,
    axOspfAreaStatus          RowStatus
}

axOspfAreaDomainNumber OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "An uniquely identifying number of domain."
    ::= { axOspfAreaEntry 1 }

axOspfAreaId OBJECT-TYPE
    SYNTAX IpAddress
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "A 32-bit integer uniquely identifying an area."
    ::= {axOspfAreaEntry 2}

axOspfAuthType OBJECT-TYPE
    SYNTAX INTEGER {
                       none(0),
                       simplePassword(1),
                       md5(2)
                   }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The authentication type specified for an area."
    ::= {axOspfAreaEntry 3}

axOspfImportAsExtern OBJECT-TYPE
    SYNTAX INTEGER {
                      importExternal(1),
                      importNoExternal(2),
                      importNssa(3)
               }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The area's support for importing  AS  external link- state advertisements."
    ::= {axOspfAreaEntry 4}

axOspfSpfRuns OBJECT-TYPE
    SYNTAX Counter32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The number of times that the intra-area  route table  has  been  calculated  using this area's link-state database."
    ::= {axOspfAreaEntry 5}

axOspfAreaBdrRtrCount OBJECT-TYPE
    SYNTAX Gauge32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The total number of area border routers reachable within this area."
    ::= {axOspfAreaEntry 6}

axOspfAsBdrRtrCount OBJECT-TYPE
    SYNTAX Gauge32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The total number of AS area border routers reachable within this area."
    ::= {axOspfAreaEntry 7}

axOspfAreaLsaCount OBJECT-TYPE
    SYNTAX Gauge32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The total number of LSA(link-state  advertisements) in this area. Excluding AS External LSA's"
    ::= {axOspfAreaEntry 8}

axOspfAreaLsaCksumSum OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The sum of LSA's  LS  checksums  contained in this area's link-state database."
    ::= {axOspfAreaEntry 9}

axOspfAreaSummary OBJECT-TYPE
    SYNTAX INTEGER {
                       noAreaSummary(1),
                       sendAreaSummary(2)
                   }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "he variable axOspfAreaSummary controls the import of summary LSAs into stub areas. Value is only sendAreaSummary(2)."
    ::= {axOspfAreaEntry 10}

axOspfAreaStatus OBJECT-TYPE
    SYNTAX RowStatus
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "This object permits management of the table by facilitating actions such as row creation, construction, and destruction."
    ::= {axOspfAreaEntry 11}


--
-- axOspfStubAreaTable
--

axOspfStubAreaTable OBJECT-TYPE
    SYNTAX SEQUENCE OF AxOspfStubAreaEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The set of metrics that will be advertised  by a default Area Border Router into a stub area."
    ::= {axOspf 3}

axOspfStubAreaEntry OBJECT-TYPE
    SYNTAX AxOspfStubAreaEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The metric for a given Type  of  Service  that will be advertised by a default Area Border Router into a stub area."
    INDEX { axOspfStubDomainNumber,
            axOspfStubAreaId,
            axOspfStubTOS }
    ::= {axOspfStubAreaTable 1}
AxOspfStubAreaEntry ::= SEQUENCE {
    axOspfStubDomainNumber    Integer32,
    axOspfStubAreaId          IpAddress,
    axOspfStubTOS             Integer32,
    axOspfStubMetric          Integer32,
    axOspfStubStatus          RowStatus,
    axOspfStubMetricType      INTEGER
}

axOspfStubDomainNumber OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The domain identifier for the Stub  Area."
    ::= {axOspfStubAreaEntry 1}

axOspfStubAreaId OBJECT-TYPE
    SYNTAX IpAddress
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The identifier for the Stub  Area."
    ::= {axOspfStubAreaEntry 2}

axOspfStubTOS OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The Type of Service associated with the metric. Value is only 0."
    ::= {axOspfStubAreaEntry 3}

axOspfStubMetric OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The metric value applied at the indicated type of service."
    ::= {axOspfStubAreaEntry 4}

axOspfStubStatus OBJECT-TYPE
    SYNTAX RowStatus
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "This variable displays the status of the entry. This value is only valid(1)."
    ::= {axOspfStubAreaEntry 5}

axOspfStubMetricType OBJECT-TYPE
    SYNTAX INTEGER {
                       ospfMetric(1),
                       comparableCost(2),
                       nonComparable(3)
                   }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "his variable displays the type of metric advertised as a default route."
    ::= {axOspfStubAreaEntry 6}

--
-- axOspfLsdbTable
--

axOspfLsdbTable OBJECT-TYPE
    SYNTAX SEQUENCE OF AxOspfLsdbEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The OSPF Process's Link State Database."
    ::= {axOspf 4}

axOspfLsdbEntry OBJECT-TYPE
    SYNTAX AxOspfLsdbEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "A single Link State Advertisement."
    INDEX{ axOspfLsdbDomainNumber,
           axOspfLsdbAreaId,
           axOspfLsdbType,
           axOspfLsdbLsid,
           axOspfLsdbRouterId }
    ::= {axOspfLsdbTable 1}

AxOspfLsdbEntry ::= SEQUENCE {
    axOspfLsdbDomainNumber     Integer32,
    axOspfLsdbAreaId           IpAddress,
    axOspfLsdbType             INTEGER,
    axOspfLsdbLsid             IpAddress,
    axOspfLsdbRouterId         IpAddress,
    axOspfLsdbSequence         Integer32,
    axOspfLsdbAge              Integer32,
    axOspfLsdbChecksum         Integer32,
    axOspfLsdbAdvertisement    OCTET STRING
}

axOspfLsdbDomainNumber OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The identifier of the domain from  which the LSA was received."
    ::= {axOspfLsdbEntry 1}

axOspfLsdbAreaId OBJECT-TYPE
    SYNTAX IpAddress
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The 32 bit identifier of the Area  from  which the LSA was received."
    ::= {axOspfLsdbEntry 2}

axOspfLsdbType OBJECT-TYPE
    SYNTAX INTEGER {
                       routerLink(1),
                       networkLink(2),
                       summaryLink(3),
                       asSummaryLink(4),
                       asExternalLink(5),
                       multicastLink(6),
                       nssaExternalLink(7),
                       areaOpaqueLink(10)
                   }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The type  of  the  link  state  advertisement."
    ::= {axOspfLsdbEntry 3}

axOspfLsdbLsid OBJECT-TYPE
    SYNTAX IpAddress
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The Link State ID . It identifies the piece of the routing domain that is being described by the advertisement."
    ::= {axOspfLsdbEntry 4}

axOspfLsdbRouterId OBJECT-TYPE
    SYNTAX IpAddress
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The number that uniquely identifies the originating router in the Autonomous System."
    ::= {axOspfLsdbEntry 5}

axOspfLsdbSequence OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The sequence number field is a  signed  32-bit integer."
    ::= {axOspfLsdbEntry 6}

axOspfLsdbAge OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "This the age of the link state adver-tisement in seconds."
    ::= {axOspfLsdbEntry 7}

axOspfLsdbChecksum OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "This field is the  checksum  of  the  complete contents  of  the  advertisement, excepting the age field."
    ::= {axOspfLsdbEntry 8}

axOspfLsdbAdvertisement OBJECT-TYPE
    SYNTAX OCTET STRING
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The entire Link State Advertisement, including its header."
    ::= {axOspfLsdbEntry 9}

--
-- axOspfAreaRangeTable
--

axOspfAreaRangeTable OBJECT-TYPE
    SYNTAX SEQUENCE OF AxOspfAreaRangeEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "A range if IP addresses  specified  by  an  IP address/IP  network  mask  pair."
    ::= {axOspf 5}

axOspfAreaRangeEntry OBJECT-TYPE
    SYNTAX AxOspfAreaRangeEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "A range if IP addresses specified by an IP address/IP network mask pair."
    INDEX { axOspfAreaRangeDomainNumber,
            axOspfAreaRangeAreaId,
            axOspfAreaRangeNet }
    ::= {axOspfAreaRangeTable 1}

AxOspfAreaRangeEntry ::= SEQUENCE {
    axOspfAreaRangeDomainNumber    Integer32,
    axOspfAreaRangeAreaId          IpAddress,
    axOspfAreaRangeNet             IpAddress,
    axOspfAreaRangeMask            IpAddress,
    axOspfAreaRangeStatus          RowStatus,
    axOspfAreaRangeEffect          INTEGER
}

axOspfAreaRangeDomainNumber OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Domain number of the Area."
    ::= {axOspfAreaRangeEntry 1}

axOspfAreaRangeAreaId OBJECT-TYPE
    SYNTAX IpAddress
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The area that the address range is to be found within.
"
    ::= {axOspfAreaRangeEntry 2}

axOspfAreaRangeNet OBJECT-TYPE
    SYNTAX IpAddress
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The IP Address of the Net or Subnet  indicated by the range."
    ::= {axOspfAreaRangeEntry 3}

axOspfAreaRangeMask OBJECT-TYPE
    SYNTAX IpAddress
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The Subnet Mask that pertains to  the  Net  or Subnet."
    ::= {axOspfAreaRangeEntry 4}

axOspfAreaRangeStatus OBJECT-TYPE
    SYNTAX RowStatus
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "This object permits management of the table by facilitating actions such as row creation, construction, and destruction."
    ::= {axOspfAreaRangeEntry 5}

axOspfAreaRangeEffect OBJECT-TYPE
    SYNTAX INTEGER {
                       advertiseMatching(1),
                       doNotAdvertiseMatching(2)
                   }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Subnets subsumed by ranges either trigger  the advertisement  of the indicated summary (advertiseMatching), or result in  the  subnet's  not being advertised at all outside the area."
    ::= {axOspfAreaRangeEntry 6}

--
-- axOspfIfTable
--

axOspfIfTable OBJECT-TYPE
    SYNTAX SEQUENCE OF AxOspfIfEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The OSPF Interface Table describes the interfaces from the viewpoint of OSPF."
    ::= {axOspf 7}

axOspfIfEntry OBJECT-TYPE
    SYNTAX AxOspfIfEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The OSPF Interface Entry describes one  interface from the viewpoint of OSPF."
    INDEX { axOspfIfDomainNumber,
            axOspfIfIpAddress,
            axOspfAddressLessIf }
    ::= {axOspfIfTable 1}

AxOspfIfEntry ::= SEQUENCE {
    axOspfIfDomainNumber               Integer32,
    axOspfIfIpAddress                  IpAddress,
    axOspfAddressLessIf                InterfaceIndexOrZero,
    axOspfIfAreaId                     IpAddress,
    axOspfIfType                       INTEGER,
    axOspfIfAdminStat                  Status,
    axOspfIfRtrPriority                Integer32,
    axOspfIfTransitDelay               Integer32,
    axOspfIfRetransInterval            Integer32,
    axOspfIfHelloInterval              Integer32,
    axOspfIfRtrDeadInterval            Integer32,
    axOspfIfPollInterval               Integer32,
    axOspfIfState                      INTEGER,
    axOspfIfDesignatedRouter           IpAddress,
    axOspfIfBackupDesignatedRouter     IpAddress,
    axOspfIfEvents                     Counter32,
    axOspfIfAuthKey                    OCTET STRING,
    axOspfIfStatus                     RowStatus,
    axOspfIfMulticastForwarding        INTEGER
}

axOspfIfDomainNumber OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The domain number of this OSPF interface."
    ::= {axOspfIfEntry 1}

axOspfIfIpAddress OBJECT-TYPE
    SYNTAX IpAddress
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The IP address of this OSPF interface."
    ::= {axOspfIfEntry 2}

axOspfAddressLessIf OBJECT-TYPE
    SYNTAX InterfaceIndexOrZero
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "For the purpose of easing  the  instancing  of addressed   and  addressless  interfaces;  This variable takes the value 0 on  interfaces  with IP  Addresses,  and  the corresponding value of ifIndex for interfaces having no IP Address."
    ::= {axOspfIfEntry 3}

axOspfIfAreaId OBJECT-TYPE
    SYNTAX IpAddress
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "A integer uniquely identifying the area to which the interface connects."
    ::= {axOspfIfEntry 4}

axOspfIfType OBJECT-TYPE
    SYNTAX INTEGER {
                      broadcast(1),
                      nbma (2),
                      pointToPoint(3),
                      pointToMultipoint(5)
               }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The OSPF interface type."
    ::= {axOspfIfEntry 5}

axOspfIfAdminStat OBJECT-TYPE
    SYNTAX Status
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The OSPF  interface's  administrative  status."
    ::= {axOspfIfEntry 6}

axOspfIfRtrPriority OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The priority of this interface."
    ::= {axOspfIfEntry 7}

axOspfIfTransitDelay OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The estimated number of seconds  it  takes  to transmit  a  link state update packet over this interface."
    ::= {axOspfIfEntry 8}

axOspfIfRetransInterval OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The number of seconds between link-state ad-vertisement retransmissions, for adjacencies belonging to this  interface."
    ::= {axOspfIfEntry 9}

axOspfIfHelloInterval OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The length of time, in  seconds,  between the Hello  packets that the router sends on the interface."
    ::= {axOspfIfEntry 10}

axOspfIfRtrDeadInterval OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The number of seconds that  a  router's  Hello packets  have  not been seen before it's neighbors declare the router down."
    ::= {axOspfIfEntry 11}

axOspfIfPollInterval OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The larger time interval, in seconds,  between the  Hello  packets  sent  to  an inactive non- broadcast multi- access neighbor."
    ::= {axOspfIfEntry 12}

axOspfIfState OBJECT-TYPE
    SYNTAX INTEGER {
                       down(1),
                       loopback(2),
                       waiting(3),
                       pointToPoint(4),
                       designatedRouter(5),
                       backupDesignatedRouter(6),
                       otherDesignatedRouter(7)
                   }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The OSPF Interface State."
    ::= {axOspfIfEntry 13}

axOspfIfDesignatedRouter OBJECT-TYPE
    SYNTAX IpAddress
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The IP Address of the Designated Router."
    ::= {axOspfIfEntry 14}

axOspfIfBackupDesignatedRouter OBJECT-TYPE
    SYNTAX IpAddress
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The IP Address of the Backup Designated Router."
    ::= {axOspfIfEntry 15}

axOspfIfEvents OBJECT-TYPE
    SYNTAX Counter32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The number of times this  OSPF  interface  has changed its state, or an error has occurred."
    ::= {axOspfIfEntry 16}

axOspfIfAuthKey OBJECT-TYPE
    SYNTAX OCTET STRING
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The Authentication Key."
    ::= {axOspfIfEntry 17}

axOspfIfStatus OBJECT-TYPE
    SYNTAX RowStatus
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "This object permits management of the table by facilitating actions such as row creation, construction, and destruction."
    ::= {axOspfIfEntry 18}

axOspfIfMulticastForwarding OBJECT-TYPE
    SYNTAX INTEGER {
                       blocked(1),   -- no multicast forwarding
                       multicast(2), -- using multicast address
                       unicast(3)    -- to each OSPF neighbor
                   }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The way multicasts should  forwarded  on  this interface;  not  forwarded,  forwarded  as data link multicasts, or forwarded as data link unicasts."
    ::= {axOspfIfEntry 19}

--
-- axOspfIfMetricTable
--

axOspfIfMetricTable OBJECT-TYPE
    SYNTAX SEQUENCE OF AxOspfIfMetricEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The TOS metrics for a non-virtual interface identified by the interface index."
    ::= { axOspf 8 }

axOspfIfMetricEntry OBJECT-TYPE
    SYNTAX AxOspfIfMetricEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "A particular TOS metric for a non-virtual interface identified by the interface index."
    INDEX { axOspfIfMetricDomainNumber,
            axOspfIfMetricIpAddress,
            axOspfIfMetricAddressLessIf,
            axOspfIfMetricTOS }
    ::= { axOspfIfMetricTable 1 }

AxOspfIfMetricEntry ::= SEQUENCE {
    axOspfIfMetricDomainNumber     Integer32,
    axOspfIfMetricIpAddress        IpAddress,
    axOspfIfMetricAddressLessIf    InterfaceIndexOrZero,
    axOspfIfMetricTOS              Integer32,
    axOspfIfMetricValue            Integer32,
    axOspfIfMetricStatus           RowStatus
}

axOspfIfMetricDomainNumber OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The domain number of this OSPF interface."
    ::= {axOspfIfMetricEntry 1}

axOspfIfMetricIpAddress OBJECT-TYPE
    SYNTAX IpAddress
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The IP address of this OSPF interface."
    ::= {axOspfIfMetricEntry 2}

axOspfIfMetricAddressLessIf OBJECT-TYPE
    SYNTAX InterfaceIndexOrZero
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "For the purpose of easing  the  instancing  of addressed   and  addressless  interfaces;  This variable takes the value 0 on  interfaces  with IP  Addresses, and the value of ifIndex for interfaces having no IP Address."
    ::= {axOspfIfMetricEntry 3}

axOspfIfMetricTOS OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The type of service metric  being  referenced. this value is only 0."
    ::= {axOspfIfMetricEntry 4}

axOspfIfMetricValue OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The metric of using this type  of  service  on this interface."
    ::= {axOspfIfMetricEntry 5}

axOspfIfMetricStatus OBJECT-TYPE
    SYNTAX RowStatus
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "This object permits management of the table by facilitating actions such as row creation,  construction, and destruction."
    ::= {axOspfIfMetricEntry 6}

--
-- axOspfVirtIfTable
--

axOspfVirtIfTable OBJECT-TYPE
    SYNTAX SEQUENCE OF AxOspfVirtIfEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Information about this router's virtual interfaces."
    ::= {axOspf 9}

axOspfVirtIfEntry OBJECT-TYPE
    SYNTAX AxOspfVirtIfEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Information about a single Virtual Interface."
    INDEX { axOspfVirtIfDomainNumber,
            axOspfVirtIfAreaId,
            axOspfVirtIfNeighbor }
    ::= {axOspfVirtIfTable 1}

AxOspfVirtIfEntry ::= SEQUENCE {
    axOspfVirtIfDomainNumber       Integer32,
    axOspfVirtIfAreaId             IpAddress,
    axOspfVirtIfNeighbor           IpAddress,
    axOspfVirtIfTransitDelay       Integer32,
    axOspfVirtIfRetransInterval    Integer32,
    axOspfVirtIfHelloInterval      Integer32,
    axOspfVirtIfRtrDeadInterval    Integer32,
    axOspfVirtIfState              INTEGER,
    axOspfVirtIfEvents             Counter32,
    axOspfVirtIfAuthKey            OCTET STRING,
    axOspfVirtIfStatus             RowStatus
}

axOspfVirtIfDomainNumber OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The domain number for this  Virtual Interface"
    ::= {axOspfVirtIfEntry 1}

axOspfVirtIfAreaId OBJECT-TYPE
    SYNTAX IpAddress
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The Transit Area that the Virtual Link traverses."
    ::= {axOspfVirtIfEntry 2}

axOspfVirtIfNeighbor OBJECT-TYPE
    SYNTAX IpAddress
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The Router ID of the Virtual Neighbor."
    ::= {axOspfVirtIfEntry 3}

axOspfVirtIfTransitDelay OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The estimated number of seconds  it  takes  to transmit  a link- state update packet over this interface."
    ::= {axOspfVirtIfEntry 4}

axOspfVirtIfRetransInterval OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The number of seconds between link-state advertisement retransmissions, for adjacencies belonging to this interface."
    ::= {axOspfVirtIfEntry 5}

axOspfVirtIfHelloInterval OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The length of time, in  seconds, between the Hello  packets that the router sends on the interface."
    ::= {axOspfVirtIfEntry 6}

axOspfVirtIfRtrDeadInterval OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The number of seconds that  a  router's  Hello packets  have  not been seen before it's neighbors declare the router down."
    ::= {axOspfVirtIfEntry 7}

axOspfVirtIfState OBJECT-TYPE
    SYNTAX INTEGER {
                       down(1),        -- these use the same encoding
                       pointToPoint(4) -- as the axOspfIfTable
                   }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "OSPF virtual interface states."
    ::= {axOspfVirtIfEntry 8}

axOspfVirtIfEvents OBJECT-TYPE
    SYNTAX Counter32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The number of state changes or error events on this Virtual Link"
    ::= {axOspfVirtIfEntry 9}

axOspfVirtIfAuthKey OBJECT-TYPE
    SYNTAX OCTET STRING
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Authentication key of this interface."
    ::= {axOspfVirtIfEntry 10}

axOspfVirtIfStatus OBJECT-TYPE
    SYNTAX RowStatus
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "This object permits management of the table by facilitating actions such as row creation, construction, and destruction."
    ::= {axOspfVirtIfEntry 11}

--
-- axOspfNbrTable
--

axOspfNbrTable OBJECT-TYPE
    SYNTAX SEQUENCE OF AxOspfNbrEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "A table describing all non-virtual neighbors in the locality of the OSPF router."
    ::= {axOspf 10}

axOspfNbrEntry OBJECT-TYPE
    SYNTAX AxOspfNbrEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The information regarding a single neighbor."
    INDEX { axOspfNbrDomainNumber,
            axOspfNbrIpAddr,
            axOspfNbrAddressLessIndex }
    ::= {axOspfNbrTable 1}

AxOspfNbrEntry ::= SEQUENCE {
    axOspfNbrDomainNumber        Integer32,
    axOspfNbrIpAddr              IpAddress,
    axOspfNbrAddressLessIndex    InterfaceIndexOrZero,
    axOspfNbrRtrId               IpAddress,
    axOspfNbrOptions             Integer32,
    axOspfNbrPriority            Integer32,
    axOspfNbrState               INTEGER,
    axOspfNbrEvents              Counter32,
    axOspfNbrLsRetransQLen       Gauge32,
    axOspfNbmaNbrStatus          RowStatus,
    axOspfNbmaNbrPermanence      INTEGER
}

axOspfNbrDomainNumber OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "OSPF domain number of this neighbor."
    ::= {axOspfNbrEntry 1}

axOspfNbrIpAddr OBJECT-TYPE
    SYNTAX IpAddress
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The IP address this neighbor is using  in  its IP  Source  Address."
    ::= {axOspfNbrEntry 2}

axOspfNbrAddressLessIndex OBJECT-TYPE
    SYNTAX InterfaceIndexOrZero
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "On an interface having an  IP  Address,  zero. On  addressless  interfaces,  the corresponding value of ifIndex in the Internet Standard  MIB."
    ::= {axOspfNbrEntry 3}

axOspfNbrRtrId OBJECT-TYPE
    SYNTAX IpAddress
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The integer uniquely identifying the neighboring router in the Autonomous System."
    ::= {axOspfNbrEntry 4}

axOspfNbrOptions OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "A Bit Mask corresponding to the neighbor's options field."
    ::= {axOspfNbrEntry 5}

axOspfNbrPriority OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The priority of this neighbor in the designated router election algorithm."
    ::= {axOspfNbrEntry 6}

axOspfNbrState OBJECT-TYPE
    SYNTAX INTEGER {
                       down(1),
                       attempt(2),
                       init(3),
                       twoWay(4),
                       exchangeStart(5),
                       exchange(6),
                       loading(7),
                       full(8)
                   }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The state of the relationship with this neighbor."
    ::= {axOspfNbrEntry 7}

axOspfNbrEvents OBJECT-TYPE
    SYNTAX Counter32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The number of times this neighbor relationship has changed state, or an error has occurred."
    ::= {axOspfNbrEntry 8}

axOspfNbrLsRetransQLen OBJECT-TYPE
    SYNTAX Gauge32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The current length of the retransmission queue."
    ::= {axOspfNbrEntry 9}

axOspfNbmaNbrStatus OBJECT-TYPE
    SYNTAX RowStatus
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "This variable displays the status of the entry. This entry value is only valid(1). And enable to response this entry when axOspfIfType is nbma."
    ::= {axOspfNbrEntry 10}

axOspfNbmaNbrPermanence OBJECT-TYPE
    SYNTAX INTEGER {
                       dynamic(1),  -- learned through protocol
                       permanent(2) -- configured address
                   }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "This variable displays the status of the entry;   'dynamic' and 'permanent' refer to how the neighbor  became known."
    ::= {axOspfNbrEntry 11}

--
-- axOspfVirtNbrTable
--

axOspfVirtNbrTable OBJECT-TYPE
    SYNTAX SEQUENCE OF AxOspfVirtNbrEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "A table of virtual neighbor information."
    ::= {axOspf 11}

axOspfVirtNbrEntry OBJECT-TYPE
    SYNTAX AxOspfVirtNbrEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Virtual neighbor information."
    INDEX { axOspfVirtNbrDomainNumber,
            axOspfVirtNbrArea,
            axOspfVirtNbrRtrId }
    ::= {axOspfVirtNbrTable 1}

AxOspfVirtNbrEntry ::= SEQUENCE {
    axOspfVirtNbrDomainNumber     Integer32,
    axOspfVirtNbrArea             IpAddress,
    axOspfVirtNbrRtrId            IpAddress,
    axOspfVirtNbrIpAddr           IpAddress,
    axOspfVirtNbrOptions          Integer32,
    axOspfVirtNbrState            INTEGER,
    axOspfVirtNbrEvents           Counter32,
    axOspfVirtNbrLsRetransQLen    Gauge32
}

axOspfVirtNbrDomainNumber OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The domain number."
    ::= {axOspfVirtNbrEntry 1}

axOspfVirtNbrArea OBJECT-TYPE
    SYNTAX IpAddress
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The Transit Area Identifier."
    ::= {axOspfVirtNbrEntry 2}

axOspfVirtNbrRtrId OBJECT-TYPE
    SYNTAX IpAddress
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "A integer  uniquely  identifying  the neighboring router in the Autonomous System."
    ::= {axOspfVirtNbrEntry 3}

axOspfVirtNbrIpAddr OBJECT-TYPE
    SYNTAX IpAddress
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The IP address this Virtual Neighbor is using."
    ::= {axOspfVirtNbrEntry 4}

axOspfVirtNbrOptions OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "A Bit Mask corresponding to the neighbor's options field.
         Bit 1, if set, indicates that the  system  will operate on Type of Service metrics other than TOS 0. If zero,
         the neighbor will  ignore  all metrics except the TOS 0 metric.
         Bit 2, if set, indica"
    ::= {axOspfVirtNbrEntry 5}

axOspfVirtNbrState OBJECT-TYPE
    SYNTAX INTEGER {
                       down(1),
                       attempt(2),
                       init(3),
                       twoWay(4),
                       exchangeStart(5),
                       exchange(6),
                       loading(7),
                       full(8)
                   }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The state of the  Virtual  Neighbor  Relationship."
    ::= {axOspfVirtNbrEntry 6}

axOspfVirtNbrEvents OBJECT-TYPE
    SYNTAX Counter32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The number of times this virtual link has changed its state, or an error has occurred."
    ::= {axOspfVirtNbrEntry 7}

axOspfVirtNbrLsRetransQLen OBJECT-TYPE
    SYNTAX Gauge32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The current length of the retransmission queue."
    ::= {axOspfVirtNbrEntry 8}

--
-- axOspfExtLsdbTable
--

axOspfExtLsdbTable OBJECT-TYPE
    SYNTAX SEQUENCE OF AxOspfExtLsdbEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The OSPF Process's Links State Database."
    ::= {axOspf 12}

axOspfExtLsdbEntry OBJECT-TYPE
    SYNTAX AxOspfExtLsdbEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "A single Link State Advertisement."
    INDEX { axOspfExtLsdbDomainNumber,
            axOspfExtLsdbType,
            axOspfExtLsdbLsid,
            axOspfExtLsdbRouterId }
    ::= {axOspfExtLsdbTable 1}

AxOspfExtLsdbEntry ::= SEQUENCE {
    axOspfExtLsdbDomainNumber     Integer32,
    axOspfExtLsdbType             INTEGER,
    axOspfExtLsdbLsid             IpAddress,
    axOspfExtLsdbRouterId         IpAddress,
    axOspfExtLsdbSequence         Integer32,
    axOspfExtLsdbAge              Integer32,
    axOspfExtLsdbChecksum         Integer32,
    axOspfExtLsdbAdvertisement    OCTET STRING
}

axOspfExtLsdbDomainNumber OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "OSPF domain number."
    ::= {axOspfExtLsdbEntry 1}

axOspfExtLsdbType OBJECT-TYPE
    SYNTAX INTEGER {
                       asExternalLink(5)
                   }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The type  of  the  link  state  advertisement."
    ::= {axOspfExtLsdbEntry 2}

axOspfExtLsdbLsid OBJECT-TYPE
    SYNTAX IpAddress
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the  routing  domain that is being described by the advertisement."
    ::= {axOspfExtLsdbEntry 3}

axOspfExtLsdbRouterId OBJECT-TYPE
    SYNTAX IpAddress
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The 32 bit number that uniquely identifies the originating router in the Autonomous System."
    ::= {axOspfExtLsdbEntry 4}

axOspfExtLsdbSequence OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The sequence number field is a  signed  32-bit integer."
    ::= {axOspfExtLsdbEntry 5}

axOspfExtLsdbAge OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The age of the link state advertisement in seconds."
    ::= {axOspfExtLsdbEntry 6}

axOspfExtLsdbChecksum OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "This field is the  checksum  of  the  complete contents  of  the  advertisement, excepting the age field.  The age field is excepted  so  that an   advertisement's  age  can  be  incremented without updating the  checksum."
    ::= {axOspfExtLsdbEntry 7}

axOspfExtLsdbAdvertisement OBJECT-TYPE
    SYNTAX OCTET STRING
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The entire Link State Advertisement, including its header."
    ::= {axOspfExtLsdbEntry 8}

--
-- axOspfAreaAggregateTable
--

axOspfAreaAggregateTable OBJECT-TYPE
    SYNTAX SEQUENCE OF AxOspfAreaAggregateEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "A range of IP addresses  specified  by  an  IP address/IP  network  mask  pair."
    ::= {axOspf 14}

axOspfAreaAggregateEntry OBJECT-TYPE
    SYNTAX AxOspfAreaAggregateEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "A range of IP addresses  specified  by  an  IP address/IP  network  mask  pair."
    INDEX { axOspfAreaAggregateDomainNumber,
            axOspfAreaAggregateAreaID,
            axOspfAreaAggregateLsdbType,
            axOspfAreaAggregateNet,
            axOspfAreaAggregateMask }
    ::= {axOspfAreaAggregateTable 1}

AxOspfAreaAggregateEntry ::= SEQUENCE {
    axOspfAreaAggregateDomainNumber    Integer32,
    axOspfAreaAggregateAreaID          IpAddress,
    axOspfAreaAggregateLsdbType        INTEGER,
    axOspfAreaAggregateNet             IpAddress,
    axOspfAreaAggregateMask            IpAddress,
    axOspfAreaAggregateStatus          RowStatus,
    axOspfAreaAggregateEffect          INTEGER
}

axOspfAreaAggregateDomainNumber OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "OSPF domain number."
    ::= {axOspfAreaAggregateEntry 1}

axOspfAreaAggregateAreaID OBJECT-TYPE
    SYNTAX IpAddress
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The Area the Address Aggregate is to be found within."
    ::= {axOspfAreaAggregateEntry 2}

axOspfAreaAggregateLsdbType OBJECT-TYPE
    SYNTAX INTEGER {
                       summaryLink(3),
                       nssaExternalLink(7)
                   }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The type of the address aggregate.  This field specifies the Lsdb type that this address aggregate applies to."
    ::= {axOspfAreaAggregateEntry 3}

axOspfAreaAggregateNet OBJECT-TYPE
    SYNTAX IpAddress
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The IP Address of the Net or Subnet indicated by the range."
    ::= {axOspfAreaAggregateEntry 4}

axOspfAreaAggregateMask OBJECT-TYPE
    SYNTAX IpAddress
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The Subnet Mask that pertains to the Net or Subnet."
    ::= {axOspfAreaAggregateEntry 5}

axOspfAreaAggregateStatus OBJECT-TYPE
    SYNTAX RowStatus
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "This object permits management of the table by facilitating actions such as row creation, construction, and destruction."
    ::= {axOspfAreaAggregateEntry 6}

axOspfAreaAggregateEffect OBJECT-TYPE
    SYNTAX INTEGER {
                       advertiseMatching(1),
                       doNotAdvertiseMatching(2)
                   }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Subnets subsumed by ranges either trigger the advertisement of the indicated aggregate(advertiseMatching) or result in the subnet's not being advertised at all outside the area."
    ::= {axOspfAreaAggregateEntry 7}

--
-- axOspfTrapControlTable
--

axOspfTrapControlTable OBJECT-TYPE
    SYNTAX SEQUENCE OF AxOspfTrapControlEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The table about trap information."
    ::= {axOspfTrap 1}

axOspfTrapControlEntry OBJECT-TYPE
    SYNTAX AxOspfTrapControlEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The Entry about trap information."
    INDEX { axOspfTrapDomainNumber }
    ::= {axOspfTrapControlTable 1}

AxOspfTrapControlEntry ::= SEQUENCE {
    axOspfTrapDomainNumber    Integer32,
    axOspfSetTrap             OCTET STRING,
    axOspfConfigErrorType     INTEGER,
    axOspfPacketType          INTEGER,
    axOspfPacketSrc           IpAddress
}

axOspfTrapDomainNumber OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "axOspfTrap domain number."
    ::= {axOspfTrapControlEntry 1}

axOspfSetTrap OBJECT-TYPE
    SYNTAX OCTET STRING
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "A four-octet string serving as a bit  map  for the trap events defined by the OSPF traps. This object is used to enable and  disable  specific OSPF   traps   where  a  1  in  the  bit  field represents enabled.  The right-most bit  (least significant) rep"
    ::= {axOspfTrapControlEntry 2}

axOspfConfigErrorType OBJECT-TYPE
    SYNTAX INTEGER {
                       badVersion (1),
                       areaMismatch (2),
                       unknownNbmaNbr (3),
                       unknownVirtualNbr (4),
                       authTypeMismatch(5),
                       authFailure (6),
                       netMaskMismatch (7),
                       helloIntervalMismatch (8),
                       deadIntervalMismatch (9),
                       optionMismatch (10),
                       mtuMismatch (11),
                       duplicateRouterId (12),
                       noError (13)
                   }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Potential types  of  configuration  conflicts. Used  by the ospfConfigError and ospfConfigVir-tError traps. When the last value of a trap using this object is needed, but no traps of that type have been sent, this value pertaining to this object should be returned as noError."
    ::= {axOspfTrapControlEntry 3}

axOspfPacketType OBJECT-TYPE
    SYNTAX INTEGER {
                       hello(1),
                       dbDescript(2),
                       lsReq(3),
                       lsUpdate(4),
                       lsAck(5),
                       nullPacket(6)
                   }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "OSPF packet types. When the last value of a trap using this object is needed, but no traps of that type have been sent, this value pertaining to this object should be returned as nullPacket."
    ::= {axOspfTrapControlEntry 4}

axOspfPacketSrc OBJECT-TYPE
    SYNTAX IpAddress
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The IP address of an inbound packet that  can-not be identified by a neighbor instance."
    ::= {axOspfTrapControlEntry 5}

--
-- Notification Type definitions
--

axOspfTrapsPrefix               OBJECT IDENTIFIER ::= { axOspfTraps 0 }

--
-- axOspfTraps
--
axOspfVirtIfStateChange  NOTIFICATION-TYPE
    OBJECTS       {
                    axOspfVirtIfDomainNumber,
                    axOspfRouterId,
                    axOspfVirtIfAreaId,
                    axOspfVirtIfNeighbor,
                    axOspfVirtIfState
                  }
    STATUS        current
    DESCRIPTION
             "This trap signifies that there has been a change in the state of an OSPF virtual interface."
    ::= { axOspfTrapsPrefix 1 }

axOspfNbrStateChange  NOTIFICATION-TYPE
    OBJECTS       {
                    axOspfNbrDomainNumber,
                    axOspfRouterId,
                    axOspfNbrIpAddr,
                    axOspfNbrAddressLessIndex,
                    axOspfNbrRtrId,
                    axOspfNbrState
                  }
    STATUS        current
    DESCRIPTION
             "This trap signifies that there has been a change in the state of a non-virtual OSPF neighbor."
    ::= { axOspfTrapsPrefix 2 }

axOspfVirtNbrStateChange  NOTIFICATION-TYPE
    OBJECTS       {
                    axOspfVirtNbrDomainNumber,
                    axOspfRouterId,
                    axOspfVirtNbrArea,
                    axOspfVirtNbrRtrId,
                    axOspfVirtNbrState
                  }
    STATUS        current
    DESCRIPTION
             "This trap signifies that there has been a change in the state of an OSPF virtual neighbor."
    ::= { axOspfTrapsPrefix 3 }

axOspfIfStateChange  NOTIFICATION-TYPE
    OBJECTS       {
                    axOspfIfDomainNumber,
                    axOspfRouterId,
                    axOspfIfIpAddress,
                    axOspfAddressLessIf,
                    axOspfIfState
                  }
    STATUS        current
    DESCRIPTION
             "This trap signifies that there has been a change in the state of a non-virtual OSPF interface."
    ::= { axOspfTrapsPrefix 16 }

axOspfIfConfigError  NOTIFICATION-TYPE
    OBJECTS       {
                    axOspfIfDomainNumber,
                    axOspfRouterId,
                    axOspfIfIpAddress,
                    axOspfAddressLessIf,
                    axOspfPacketSrc,
                    axOspfConfigErrorType,
                    axOspfPacketType
                  }
    STATUS        current
    DESCRIPTION
             "This trap signifies that a packet has been received on a non-virtual interface from a router whose configuration parameters conflict with this router's configuration parameters."
    ::= { axOspfTrapsPrefix 4 }

axOspfVirtIfConfigError  NOTIFICATION-TYPE
    OBJECTS       {
                    axOspfVirtIfDomainNumber,
                    axOspfRouterId,
                    axOspfVirtIfAreaId,
                    axOspfVirtIfNeighbor,
                    axOspfConfigErrorType,
                    axOspfPacketType
                  }
    STATUS        current
    DESCRIPTION
             "This trap signifies that a packet has been received on a virtual interface from a router whose configuration parameters conflict with this router's configuration parameters."
    ::= { axOspfTrapsPrefix 5 }

axOspfIfAuthFailure  NOTIFICATION-TYPE
    OBJECTS       {
                    axOspfIfDomainNumber,
                    axOspfRouterId,
                    axOspfIfIpAddress,
                    axOspfAddressLessIf,
                    axOspfPacketSrc,
                    axOspfConfigErrorType,
                    axOspfPacketType
                  }
    STATUS        current
    DESCRIPTION
             "This trap signifies that a packet has been received on a non-virtual interface from a router whose authentication key or authentication type conflicts with this router's authentication key or authentication type."
    ::= { axOspfTrapsPrefix 6 }

axOspfVirtIfAuthFailure  NOTIFICATION-TYPE
    OBJECTS       {
                    axOspfVirtIfDomainNumber,
                    axOspfRouterId,
                    axOspfVirtIfAreaId,
                    axOspfVirtIfNeighbor,
                    axOspfConfigErrorType,
                    axOspfPacketType
                  }
    STATUS        current
    DESCRIPTION
             "This trap signifies that a packet has been received on a virtual interface from a router whose authentication key or authentication type conflicts with this router's authentication key or authentication type."
    ::= { axOspfTrapsPrefix 7 }


--
-- Conformance Statements
--

-- Conformance identifier

axOspfConformance               OBJECT IDENTIFIER ::= { axOspf 1000 }
axOspfCompliances               OBJECT IDENTIFIER ::= { axOspfConformance 1 }
axOspfGroups                    OBJECT IDENTIFIER ::= { axOspfConformance 2 }

--
-- Compliance
--

    axOspfCompliance MODULE-COMPLIANCE
        STATUS    current
        DESCRIPTION
            "AX Ospf Object"
        MODULE
            MANDATORY-GROUPS { axOspfGroup,
                               axOspfTrapNotificationGroup }
        ::= { axOspfCompliances 1 }

--
-- Object Group
--
    axOspfGroup OBJECT-GROUP
        OBJECTS     {
                        axOspfGeneralDomainNumber,
                        axOspfRouterId,
                        axOspfAdminStat,
                        axOspfVersionNumber,
                        axOspfAreaBdrRtrStatus,
                        axOspfASBdrRtrStatus,
                        axOspfExternLsaCount,
                        axOspfExternLsaCksumSum,
                        axOspfTOSSupport,
                        axOspfOriginateNewLsas,
                        axOspfRxNewLsas,
                        axOspfExtLsdbLimit,
                        axOspfMulticastExtensions,
                        axOspfAreaDomainNumber,
                        axOspfAreaId,
                        axOspfAuthType,
                        axOspfImportAsExtern,
                        axOspfSpfRuns,
                        axOspfAreaBdrRtrCount,
                        axOspfAsBdrRtrCount,
                        axOspfAreaLsaCount,
                        axOspfAreaLsaCksumSum,
                        axOspfAreaSummary,
                        axOspfAreaStatus,
                        axOspfStubDomainNumber,
                        axOspfStubAreaId,
                        axOspfStubTOS,
                        axOspfStubMetric,
                        axOspfStubStatus,
                        axOspfStubMetricType,
                        axOspfLsdbDomainNumber,
                        axOspfLsdbAreaId,
                        axOspfLsdbType,
                        axOspfLsdbLsid,
                        axOspfLsdbRouterId,
                        axOspfLsdbSequence,
                        axOspfLsdbAge,
                        axOspfLsdbChecksum,
                        axOspfLsdbAdvertisement,
                        axOspfAreaRangeDomainNumber,
                        axOspfAreaRangeAreaId,
                        axOspfAreaRangeNet,
                        axOspfAreaRangeMask,
                        axOspfAreaRangeStatus,
                        axOspfAreaRangeEffect,
                        axOspfIfDomainNumber,
                        axOspfIfIpAddress,
                        axOspfAddressLessIf,
                        axOspfIfAreaId,
                        axOspfIfType,
                        axOspfIfAdminStat,
                        axOspfIfRtrPriority,
                        axOspfIfTransitDelay,
                        axOspfIfRetransInterval,
                        axOspfIfHelloInterval,
                        axOspfIfRtrDeadInterval,
                        axOspfIfPollInterval,
                        axOspfIfState,
                        axOspfIfDesignatedRouter,
                        axOspfIfBackupDesignatedRouter,
                        axOspfIfEvents,
                        axOspfIfAuthKey,
                        axOspfIfStatus,
                        axOspfIfMulticastForwarding,
                        axOspfIfMetricDomainNumber,
                        axOspfIfMetricIpAddress,
                        axOspfIfMetricAddressLessIf,
                        axOspfIfMetricTOS,
                        axOspfIfMetricValue,
                        axOspfIfMetricStatus,
                        axOspfVirtIfDomainNumber,
                        axOspfVirtIfAreaId,
                        axOspfVirtIfNeighbor,
                        axOspfVirtIfTransitDelay,
                        axOspfVirtIfRetransInterval,
                        axOspfVirtIfHelloInterval,
                        axOspfVirtIfRtrDeadInterval,
                        axOspfVirtIfState,
                        axOspfVirtIfEvents,
                        axOspfVirtIfAuthKey,
                        axOspfVirtIfStatus,
                        axOspfNbrDomainNumber,
                        axOspfNbrIpAddr,
                        axOspfNbrAddressLessIndex,
                        axOspfNbrRtrId,
                        axOspfNbrOptions,
                        axOspfNbrPriority,
                        axOspfNbrState,
                        axOspfNbrEvents,
                        axOspfNbrLsRetransQLen,
                        axOspfNbmaNbrStatus,
                        axOspfNbmaNbrPermanence,
                        axOspfVirtNbrDomainNumber,
                        axOspfVirtNbrArea,
                        axOspfVirtNbrRtrId,
                        axOspfVirtNbrIpAddr,
                        axOspfVirtNbrOptions,
                        axOspfVirtNbrState,
                        axOspfVirtNbrEvents,
                        axOspfVirtNbrLsRetransQLen,
                        axOspfExtLsdbDomainNumber,
                        axOspfExtLsdbType,
                        axOspfExtLsdbLsid,
                        axOspfExtLsdbRouterId,
                        axOspfExtLsdbSequence,
                        axOspfExtLsdbAge,
                        axOspfExtLsdbChecksum,
                        axOspfExtLsdbAdvertisement,
                        axOspfAreaAggregateDomainNumber,
                        axOspfAreaAggregateAreaID,
                        axOspfAreaAggregateLsdbType,
                        axOspfAreaAggregateNet,
                        axOspfAreaAggregateMask,
                        axOspfAreaAggregateStatus,
                        axOspfAreaAggregateEffect,
                        axOspfTrapDomainNumber,
                        axOspfSetTrap,
                        axOspfConfigErrorType,
                        axOspfPacketType,
                        axOspfPacketSrc
                    }
        STATUS      current
        DESCRIPTION
            "axOspf General Group"
        ::= { axOspfGroups 1 }

--
-- Notification Group
--
axOspfTrapNotificationGroup NOTIFICATION-GROUP
    NOTIFICATIONS   {
                        axOspfVirtIfStateChange,
                        axOspfNbrStateChange,
                        axOspfVirtNbrStateChange,
                        axOspfIfStateChange,
                        axOspfIfConfigError,
                        axOspfVirtIfConfigError,
                        axOspfIfAuthFailure,
                        axOspfVirtIfAuthFailure
                    }
    STATUS          current
    DESCRIPTION
        "The collection of notifications of axOspfTrap."
    ::= { axOspfGroups 100 }

END