-- This file was included in Ciena MIB release MIBS-CIENA-CES-08-07-00-024 -- -- CIENA-CES-PORT-XCVR-MIB.my -- CIENA-CES-PORT-XCVR-MIB DEFINITIONS ::= BEGIN IMPORTS cienaGlobalMacAddress FROM CIENA-GLOBAL-MIB cienaCommon, cienaCesConfig, cienaCesNotifications FROM CIENA-SMI CienaGlobalSeverity FROM CIENA-TC enterprises, Unsigned32, MODULE-IDENTITY, OBJECT-IDENTITY, NOTIFICATION-TYPE FROM SNMPv2-SMI DisplayString, MacAddress, TEXTUAL-CONVENTION FROM SNMPv2-TC; -- -- Node definitions -- -- 1.3.6.1.4.1.1271.2.1.9 cienaCesPortXcvrMIB MODULE-IDENTITY LAST-UPDATED "202212070000Z" -- December 7, 2022 at 00:00 GMT (202212070000Z) ORGANIZATION "Ciena Corp." CONTACT-INFO " Mib Meister 7035 Ridge Road Hanover, Maryland 21076 USA Phone: +1 800 921 1144 Email: support@ciena.com" DESCRIPTION "This module defines the port XCVR related notifications." REVISION "202212070000Z" -- December 7, 2022 at 00:00 GMT (202212070000Z) DESCRIPTION "Added new objects cienaCesPortXcvrPwrUsage,cienaCesPortXcvrPortNumber and cienaCesPortXcvrPortName to cienaCesPortXcvrTable." REVISION "202103240000Z" -- March 24, 2021 at 00:00 GMT (202103240000Z) DESCRIPTION "Added a new object cienaCesPortXcvrNotifPortName." REVISION "201907250000Z" -- July 25, 2019 at 00:00 GMT (201907250000Z) DESCRIPTION "Added cfp2Dco(17) in cienaCesPortXcvrIdentiferType." REVISION "201901030000Z" -- January 3, 2019 at 00:00 GMT (201901030000Z) DESCRIPTION "Add Rx/Tx power High/LowWarning Notifications." REVISION "201809280000Z" -- September 28, 2018 at 00:00 GMT (201809280000Z) DESCRIPTION "Added cfp, qsfpPlus and qsfp28 in cienaCesPortXcvrIdentiferType. Added unit information." REVISION "201806150000Z" -- June 15, 2018 at 00:00 GMT (201806150000Z) DESCRIPTION "Added a new object cienaCesPortXcvrFecMode." REVISION "201805150000Z" -- May 15, 2018 at 00:00 GMT (201805150000Z) DESCRIPTION "Add TxHigh/LowWarning Notifications" REVISION "201804200000Z" -- April 20, 2018 at 00:00 GMT (201804200000Z) DESCRIPTION "Add RxHigh/LowWarning Notifications" REVISION "201706070000Z" -- June 7, 2017 at 00:00 GMT (201706070000Z) DESCRIPTION "Updated contact info." REVISION "201610070000Z" -- October 7, 2016 at 00:00 GMT (201610070000Z) DESCRIPTION "Added a new object cienaCesPortXcvrUncertifiedNotification." REVISION "201108230000Z" -- August 23, 2011 at 00:00 GMT (201108230000Z) DESCRIPTION "Added a new object cienaCesPortXcvrTxOutputPower." REVISION "201107060000Z" -- July 6, 2011 at 00:00 GMT (201107060000Z) DESCRIPTION "Corrected Units changed watts to uW in descriptions." ::= { cienaCesConfig 9 } -- 1.3.6.1.4.1.1271.2.1.9.1 cienaCesPortXcvrMIBObjects OBJECT IDENTIFIER ::= { cienaCesPortXcvrMIB 1 } -- 1.3.6.1.4.1.1271.2.1.9.1.1 cienaCesPortXcvr OBJECT IDENTIFIER ::= { cienaCesPortXcvrMIBObjects 1 } -- 1.3.6.1.4.1.1271.2.1.9.1.1.1 cienaCesPortXcvrTable OBJECT-TYPE SYNTAX SEQUENCE OF CienaCesPortXcvrEntry ACCESS not-accessible STATUS current DESCRIPTION "This table contains descriptions and settings for each of the physical transceiver devices." ::= { cienaCesPortXcvr 1 } -- 1.3.6.1.4.1.1271.2.1.9.1.1.1.1 cienaCesPortXcvrEntry OBJECT-TYPE SYNTAX CienaCesPortXcvrEntry ACCESS not-accessible STATUS current DESCRIPTION "The transceiver device entry." INDEX { cienaCesPortXcvrId } ::= { cienaCesPortXcvrTable 1 } CienaCesPortXcvrEntry ::= SEQUENCE { cienaCesPortXcvrId INTEGER, cienaCesPortXcvrOperState INTEGER, cienaCesPortXcvrTemperature INTEGER, cienaCesPortXcvrVcc INTEGER, cienaCesPortXcvrBias INTEGER, cienaCesPortXcvrRxPower INTEGER, cienaCesPortXcvrHighTempAlarmThreshold Integer32, cienaCesPortXcvrLowTempAlarmThreshold Integer32, cienaCesPortXcvrHighVccAlarmThreshold Integer32, cienaCesPortXcvrLowVccAlarmThreshold Integer32, cienaCesPortXcvrHighBiasAlarmThreshold Integer32, cienaCesPortXcvrLowBiasAlarmThreshold Integer32, cienaCesPortXcvrHighTxPwAlarmThreshold Integer32, cienaCesPortXcvrLowTxPwAlarmThreshold Integer32, cienaCesPortXcvrHighRxPwAlarmThreshold Integer32, cienaCesPortXcvrLowRxPwAlarmThreshold Integer32, cienaCesPortXcvrNotifChassisIndex Unsigned32, cienaCesPortXcvrNotifShelfIndex Unsigned32, cienaCesPortXcvrNotifSlotIndex Unsigned32, cienaCesPortXcvrNotifPortNumber Unsigned32, cienaCesPortXcvrIdentiferType INTEGER, cienaCesPortXcvrExtIdentiferType INTEGER, cienaCesPortXcvrConnectorType INTEGER, cienaCesPortXcvrType INTEGER, cienaCesPortXcvrAdminState INTEGER, cienaCesPortXcvrVendorName DisplayString, cienaCesPortXcvrVendorOUI OCTET STRING, cienaCesPortXcvrVendorPartNum DisplayString, cienaCesPortXcvrRevNum DisplayString, cienaCesPortXcvrSerialNum DisplayString, cienaCesPortXcvrMfgDate DisplayString, cienaCesPortXcvrWaveLength INTEGER, cienaCesPortXcvrTxState INTEGER, cienaCesPortXcvrTxFaultStatus INTEGER, cienaCesPortXcvrTxOutputPower INTEGER, cienaCesPortXcvrFecMode INTEGER, cienaCesPortXcvrNotifPortName DisplayString, cienaCesPortXcvrPwrUsage Unsigned32, cienaCesPortXcvrPortNumber Unsigned32, cienaCesPortXcvrPortName DisplayString } -- 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.1 cienaCesPortXcvrId OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS not-accessible STATUS current DESCRIPTION "The ID for the transceiver." ::= { cienaCesPortXcvrEntry 1 } -- 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.2 cienaCesPortXcvrOperState OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2), loopback(3), notPresent(4), faulted(5) } ACCESS read-only STATUS current DESCRIPTION "The operational state of the transceiver." ::= { cienaCesPortXcvrEntry 2 } -- 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.3 cienaCesPortXcvrTemperature OBJECT-TYPE SYNTAX INTEGER (1..65535) UNITS "celsius" ACCESS read-only STATUS current DESCRIPTION "The temperature of the transceiver. Units are celsius." ::= { cienaCesPortXcvrEntry 3 } -- 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.4 cienaCesPortXcvrVcc OBJECT-TYPE SYNTAX INTEGER (1..65535) UNITS "mV" ACCESS read-only STATUS current DESCRIPTION "The voltage of the transceiver. Units are milli volts" ::= { cienaCesPortXcvrEntry 4 } -- 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.5 cienaCesPortXcvrBias OBJECT-TYPE SYNTAX INTEGER (1..65535) UNITS "mA" ACCESS read-only STATUS current DESCRIPTION "The bias of the transceiver. Units are milli amps" ::= { cienaCesPortXcvrEntry 5 } -- 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.6 cienaCesPortXcvrRxPower OBJECT-TYPE SYNTAX INTEGER (1..65535) UNITS "uW" ACCESS read-only STATUS current DESCRIPTION "The measured receive power of the transceiver. Units are micro watts." ::= { cienaCesPortXcvrEntry 6 } -- 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.7 cienaCesPortXcvrHighTempAlarmThreshold OBJECT-TYPE SYNTAX Integer32 UNITS "celsius" ACCESS read-only STATUS current DESCRIPTION "Indicates the higher threshold for the temperature alarm. Units are celsius." ::= { cienaCesPortXcvrEntry 7 } -- 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.8 cienaCesPortXcvrLowTempAlarmThreshold OBJECT-TYPE SYNTAX Integer32 UNITS "celsius" ACCESS read-only STATUS current DESCRIPTION "Indicates the lower threshold for the temperature alarm. Units are celsius." ::= { cienaCesPortXcvrEntry 8 } -- 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.9 cienaCesPortXcvrHighVccAlarmThreshold OBJECT-TYPE SYNTAX Integer32 UNITS "mV" ACCESS read-only STATUS current DESCRIPTION "Indicates the higher threshold for the voltage alarm. Units are milli volts" ::= { cienaCesPortXcvrEntry 9 } -- 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.10 cienaCesPortXcvrLowVccAlarmThreshold OBJECT-TYPE SYNTAX Integer32 UNITS "mV" ACCESS read-only STATUS current DESCRIPTION "Indicates the lower threshold for the voltage alarm. Units are milli volts" ::= { cienaCesPortXcvrEntry 10 } -- 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.11 cienaCesPortXcvrHighBiasAlarmThreshold OBJECT-TYPE SYNTAX Integer32 UNITS "mA" ACCESS read-only STATUS current DESCRIPTION "Indicates the higher threshold for the bias alarm. Units are milli amps" ::= { cienaCesPortXcvrEntry 11 } -- 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.12 cienaCesPortXcvrLowBiasAlarmThreshold OBJECT-TYPE SYNTAX Integer32 UNITS "mA" ACCESS read-only STATUS current DESCRIPTION "Indicates the lower threshold for the bias alarm. Units are milli amps" ::= { cienaCesPortXcvrEntry 12 } -- 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.13 cienaCesPortXcvrHighTxPwAlarmThreshold OBJECT-TYPE SYNTAX Integer32 UNITS "uW" ACCESS read-only STATUS current DESCRIPTION "Indicates the higher threshold for the Tx power alarm. Units are micro watts" ::= { cienaCesPortXcvrEntry 13 } -- 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.14 cienaCesPortXcvrLowTxPwAlarmThreshold OBJECT-TYPE SYNTAX Integer32 UNITS "uW" ACCESS read-only STATUS current DESCRIPTION "Indicates the lower threshold for the Tx power alarm. Units are micro watts." ::= { cienaCesPortXcvrEntry 14 } -- 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.15 cienaCesPortXcvrHighRxPwAlarmThreshold OBJECT-TYPE SYNTAX Integer32 UNITS "uW" ACCESS read-only STATUS current DESCRIPTION "Indicates the higher threshold for the Rx power alarm. Units are micro watts." ::= { cienaCesPortXcvrEntry 15 } -- 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.16 cienaCesPortXcvrLowRxPwAlarmThreshold OBJECT-TYPE SYNTAX Integer32 UNITS "uW" ACCESS read-only STATUS current DESCRIPTION "Indicates the lower threshold for the Rx power alarm. Units are micro watts." ::= { cienaCesPortXcvrEntry 16 } -- 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.17 cienaCesPortXcvrNotifChassisIndex OBJECT-TYPE SYNTAX Unsigned32 (1) ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicates the chassis index for the port used for trap definition." ::= { cienaCesPortXcvrEntry 17 } -- 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.18 cienaCesPortXcvrNotifShelfIndex OBJECT-TYPE SYNTAX Unsigned32 (1) ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicates the shelf index for the port used for trap definition." ::= { cienaCesPortXcvrEntry 18 } -- 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.19 cienaCesPortXcvrNotifSlotIndex OBJECT-TYPE SYNTAX Unsigned32 (1..7) ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicates the slot index for the port used for trap definition." ::= { cienaCesPortXcvrEntry 19 } -- 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.20 cienaCesPortXcvrNotifPortNumber OBJECT-TYPE SYNTAX Unsigned32 (1..65535) ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicates the port number for the corresponding PGID used for trap definition." ::= { cienaCesPortXcvrEntry 20 } -- 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.21 cienaCesPortXcvrIdentiferType OBJECT-TYPE SYNTAX INTEGER { unknown(1), gbic(2), solderedType(3), sfp(4), xbi(5), xenpak(6), xfp(7), xff(8), xfpe(9), xpak(10), x2(11), reserved(12), vendorSpecific(13), cfp(14), qsfpPlus(15), qsfp28(16), cfp2Dco(17) } ACCESS read-only STATUS current DESCRIPTION "Type for the transceiver." ::= { cienaCesPortXcvrEntry 21 } -- 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.22 cienaCesPortXcvrExtIdentiferType OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "Extended identifier type represents for this transceiver." ::= { cienaCesPortXcvrEntry 22 } -- 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.23 cienaCesPortXcvrConnectorType OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS current DESCRIPTION "Type of connector: unknown(1) sc(2) fiberChannelStyle1(3) fiberChannelStyle2(4) bnc/tnc(5) coaxialHeader(6) fiberJack(7) lc(8) mt-rj(9) mu(10) sg(11) opticalPitTail(12) reserved(13..32) hssdc(33) copperPitTail(34) reserved(35..128) vendorSpecific(129..256)" ::= { cienaCesPortXcvrEntry 23 } -- 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.24 cienaCesPortXcvrType OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS current DESCRIPTION "Type of transceiver." ::= { cienaCesPortXcvrEntry 24 } -- 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.25 cienaCesPortXcvrVendorName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS current DESCRIPTION "String containing this transceiver's vendor name." ::= { cienaCesPortXcvrEntry 25 } -- 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.26 cienaCesPortXcvrVendorOUI OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) ACCESS read-only STATUS current DESCRIPTION "String containing this transceiver's vendor OUI." ::= { cienaCesPortXcvrEntry 26 } -- 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.27 cienaCesPortXcvrVendorPartNum OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS current DESCRIPTION "String containing this transceiver's vendor part number." ::= { cienaCesPortXcvrEntry 27 } -- 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.28 cienaCesPortXcvrRevNum OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS current DESCRIPTION "String containing this tranceiver's part revision number." ::= { cienaCesPortXcvrEntry 28 } -- 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.29 cienaCesPortXcvrSerialNum OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS current DESCRIPTION "String containing this tranceiver's part serial number." ::= { cienaCesPortXcvrEntry 29 } -- 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.30 cienaCesPortXcvrMfgDate OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS current DESCRIPTION "String containing this transceiver's manufactured date." ::= { cienaCesPortXcvrEntry 30 } -- 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.31 cienaCesPortXcvrWaveLength OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS current DESCRIPTION "The wavelength of the transceiver. Units are nano meter." ::= { cienaCesPortXcvrEntry 31 } -- 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.32 cienaCesPortXcvrTxState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-only STATUS current DESCRIPTION "Indicates whether this transceiver is currently set to transmit." ::= { cienaCesPortXcvrEntry 32 } -- 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.33 cienaCesPortXcvrTxFaultStatus OBJECT-TYPE SYNTAX INTEGER { fault(1), noFault(2) } ACCESS read-only STATUS current DESCRIPTION "Indicates the fault status of this transceiver." ::= { cienaCesPortXcvrEntry 33 } -- 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.34 cienaCesPortXcvrAdminState OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2), loopback(3) } ACCESS read-only STATUS current DESCRIPTION "The administrative state of the transceiver." ::= { cienaCesPortXcvrEntry 34 } -- 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.35 cienaCesPortXcvrTxOutputPower OBJECT-TYPE SYNTAX INTEGER (1..65535) UNITS "uW" ACCESS read-only STATUS current DESCRIPTION "The measured transmitted output power of the transceiver. Units are micro watts." ::= { cienaCesPortXcvrEntry 35 } -- 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.36 cienaCesPortXcvrFecMode OBJECT-TYPE SYNTAX INTEGER { none(1), gfec(2), efec(3) } ACCESS read-only STATUS current DESCRIPTION "This represents the transceiver's FEC Mode. gfec means generic forward error correction, efec means enhanced forward error correction." ::= { cienaCesPortXcvrEntry 36 } -- 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.37 cienaCesPortXcvrNotifPortName OBJECT-TYPE SYNTAX DisplayString ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicates the port name for the corresponding PGID used for trap definition." ::= { cienaCesPortXcvrEntry 37 } -- 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.38 cienaCesPortXcvrPwrUsage OBJECT-TYPE SYNTAX Unsigned32 UNITS "uW" ACCESS read-only STATUS current DESCRIPTION "The measured power consumed by the transceiver. Units are micro watts." ::= { cienaCesPortXcvrEntry 38 } -- 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.39 cienaCesPortXcvrPortNumber OBJECT-TYPE SYNTAX Unsigned32 (1..65535) ACCESS read-only STATUS current DESCRIPTION "Indicates the port name for the corresponding PGID" ::= { cienaCesPortXcvrEntry 39 } -- 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.40 cienaCesPortXcvrPortName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS current DESCRIPTION "Indicates the port name for the corresponding PGID" ::= { cienaCesPortXcvrEntry 40 } -- 1.3.6.1.4.1.1271.2.1.9.1.2 cienaCesPortXcvrNotif OBJECT IDENTIFIER ::= { cienaCesPortXcvrMIBObjects 2 } -- 1.3.6.1.4.1.1271.2.1.9.1.2.1 cienaCesPortXcvrEventType OBJECT-TYPE SYNTAX INTEGER { inserted(1), removed(2) } ACCESS read-only STATUS current DESCRIPTION "Indicates if the transceiver specified by the ciena54XXPortXcvrId has come up, gone down or has been selected." ::= { cienaCesPortXcvrNotif 1 } -- 1.3.6.1.4.1.1271.2.1.9.1.2.2 cienaCesPortXcvrErrorType OBJECT-TYPE SYNTAX INTEGER { none(0), chksumFailed(1), opticalFault(2) } ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicates if the transceiver specified by the cienaCesPortXcvrId is faulted because of checksum failure or optical fault. This object only makes sense if the transceiver has been detected faulted; otherwise it returns 'none'." ::= { cienaCesPortXcvrNotif 2 } -- 1.3.6.1.4.1.1271.2.1.9.3 cienaCesPortXcvrMIBConformance OBJECT IDENTIFIER ::= { cienaCesPortXcvrMIB 3 } -- 1.3.6.1.4.1.1271.2.1.9.3.1 cienaCesPortXcvrMIBCompliances OBJECT IDENTIFIER ::= { cienaCesPortXcvrMIBConformance 1 } -- 1.3.6.1.4.1.1271.2.1.9.3.2 cienaCesPortXcvrMIBGroups OBJECT IDENTIFIER ::= { cienaCesPortXcvrMIBConformance 2 } -- 1.3.6.1.4.1.1271.2.2.9 cienaCesPortXcvrMIBNotificationPrefix OBJECT IDENTIFIER ::= { cienaCesNotifications 9 } -- 1.3.6.1.4.1.1271.2.2.9.0 cienaCesPortXcvrMIBNotifications OBJECT IDENTIFIER ::= { cienaCesPortXcvrMIBNotificationPrefix 0 } -- 1.3.6.1.4.1.1271.2.2.9.0.1 cienaCesPortXcvrRemovedNotification NOTIFICATION-TYPE OBJECTS { cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber, cienaCesPortXcvrNotifPortName } STATUS current DESCRIPTION "A cienaCesPortXcvrRemovedNotification is sent if the transceiver has been removed. To enable the device to send this notification: cienaCesPortXcvrLinkStateChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber and cienaCesPortXcvrNotifPortName." ::= { cienaCesPortXcvrMIBNotifications 1 } -- 1.3.6.1.4.1.1271.2.2.9.0.2 cienaCesPortXcvrInsertedNotification NOTIFICATION-TYPE OBJECTS { cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber, cienaCesPortXcvrNotifPortName } STATUS current DESCRIPTION "A cienaCesPortXcvrInsertedNotification is sent if the transceiver has been inserted. To enable the device to send this notification: cienaCesPortXcvrLinkStateChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber and cienaCesPortXcvrNotifPortName." ::= { cienaCesPortXcvrMIBNotifications 2 } -- 1.3.6.1.4.1.1271.2.2.9.0.5 cienaCesPortXcvrErrorTypeNotification NOTIFICATION-TYPE OBJECTS { cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber, cienaCesPortXcvrErrorType, cienaCesPortXcvrNotifPortName } STATUS current DESCRIPTION "A cienaCesPortXcvrErrorTypeNotification is sent if the transceiver is detected to be faulted. The reason for the failure is specified by cienaCesPortXcvrErrorType. To enable the device to send this notification: cienaCesPortXcvrErrorTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber, cienaCesPortXcvrErrorType and cienaCesPortXcvrNotifPortName." ::= { cienaCesPortXcvrMIBNotifications 5 } -- 1.3.6.1.4.1.1271.2.2.9.0.6 cienaCesPortXcvrTempHighNotification NOTIFICATION-TYPE OBJECTS { cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber, cienaCesPortXcvrNotifPortName } STATUS current DESCRIPTION "A cienaCesPortXcvrTempHighNotification is sent if the transceiver temperature exceeds the threshold. To enable the device to send this notification: cienaCesPortXcvrTempChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber and cienaCesPortXcvrNotifPortName." ::= { cienaCesPortXcvrMIBNotifications 6 } -- 1.3.6.1.4.1.1271.2.2.9.0.7 cienaCesPortXcvrTempLowNotification NOTIFICATION-TYPE OBJECTS { cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber, cienaCesPortXcvrNotifPortName } STATUS current DESCRIPTION "A cienaCesPortXcvrTempLowNotification is sent if the transceiver temperature falls below the threshold. To enable the device to send this notification: cienaCesPortXcvrTempChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber and cienaCesPortXcvrNotifPortName." ::= { cienaCesPortXcvrMIBNotifications 7 } -- 1.3.6.1.4.1.1271.2.2.9.0.8 cienaCesPortXcvrTempNormalNotification NOTIFICATION-TYPE OBJECTS { cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber, cienaCesPortXcvrNotifPortName } STATUS current DESCRIPTION "A cienaCesPortXcvrTempNormalNotification is sent when the transceiver temperature returns to normal state. To enable the device to send this notification: cienaCesPortXcvrTempChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber and cienaCesPortXcvrNotifPortName." ::= { cienaCesPortXcvrMIBNotifications 8 } -- 1.3.6.1.4.1.1271.2.2.9.0.9 cienaCesPortXcvrVoltageHighNotification NOTIFICATION-TYPE OBJECTS { cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber, cienaCesPortXcvrNotifPortName } STATUS current DESCRIPTION "A cienaCesPortXcvrVoltageHighNotification is sent if the transceiver voltage exceeds the threshold. To enable the device to send this notification: cienaCesPortXcvrVoltageChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, cienaCesPortAllTrapState needs to be set to enabled These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber and cienaCesPortXcvrNotifPortName." ::= { cienaCesPortXcvrMIBNotifications 9 } -- 1.3.6.1.4.1.1271.2.2.9.0.10 cienaCesPortXcvrVoltageLowNotification NOTIFICATION-TYPE OBJECTS { cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber, cienaCesPortXcvrNotifPortName } STATUS current DESCRIPTION "A cienaCesPortXcvrVoltageLowNotification is sent if the transceiver voltage falls below the threshold. To enable the device to send this notification: cienaCesPortXcvrVoltageChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber and cienaCesPortXcvrNotifPortName." ::= { cienaCesPortXcvrMIBNotifications 10 } -- 1.3.6.1.4.1.1271.2.2.9.0.11 cienaCesPortXcvrVoltageNormalNotification NOTIFICATION-TYPE OBJECTS { cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber, cienaCesPortXcvrNotifPortName } STATUS current DESCRIPTION "A cienaCesPortXcvrVoltageNormalNotification is sent when the transceiver voltage returns back to normal state. To enable the device to send this notification: cienaCesPortXcvrVoltageChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber and cienaCesPortXcvrNotifPortName." ::= { cienaCesPortXcvrMIBNotifications 11 } -- 1.3.6.1.4.1.1271.2.2.9.0.12 cienaCesPortXcvrBiasHighNotification NOTIFICATION-TYPE OBJECTS { cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber, cienaCesPortXcvrNotifPortName } STATUS current DESCRIPTION "A cienaCesPortXcvrBiasHighNotification is sent if the transceiver bias exceeds the threshold. To enable the device to send this notification: cienaCesPortXcvrBiasChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber and cienaCesPortXcvrNotifPortName." ::= { cienaCesPortXcvrMIBNotifications 12 } -- 1.3.6.1.4.1.1271.2.2.9.0.13 cienaCesPortXcvrBiasLowNotification NOTIFICATION-TYPE OBJECTS { cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber, cienaCesPortXcvrNotifPortName } STATUS current DESCRIPTION "A cienaCesPortXcvrBiasLowNotification is sent if the transceiver bias falls below the threshold. To enable the device to send this notification: cienaCesPortXcvrBiasChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber and cienaCesPortXcvrNotifPortName." ::= { cienaCesPortXcvrMIBNotifications 13 } -- 1.3.6.1.4.1.1271.2.2.9.0.14 cienaCesPortXcvrBiasNormalNotification NOTIFICATION-TYPE OBJECTS { cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber, cienaCesPortXcvrNotifPortName } STATUS current DESCRIPTION "A cienaCesPortXcvrBiasNormalNotification is sent when the transceiver bias returns to normal state. To enable the device to send this notification: cienaCesPortXcvrBiasChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber and cienaCesPortXcvrNotifPortName." ::= { cienaCesPortXcvrMIBNotifications 14 } -- 1.3.6.1.4.1.1271.2.2.9.0.15 cienaCesPortXcvrTxPowerHighNotification NOTIFICATION-TYPE OBJECTS { cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber, cienaCesPortXcvrNotifPortName } STATUS current DESCRIPTION "A cienaCesPortXcvrTxPowerHighNotification is sent if the transceiver TxPower exceeds the threshold. To enable the device to send this notification: cienaCesPortXcvrTxPowerChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber and cienaCesPortXcvrNotifPortName." ::= { cienaCesPortXcvrMIBNotifications 15 } -- 1.3.6.1.4.1.1271.2.2.9.0.16 cienaCesPortXcvrTxPowerLowNotification NOTIFICATION-TYPE OBJECTS { cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber, cienaCesPortXcvrNotifPortName } STATUS current DESCRIPTION "A cienaCesPortXcvrTxPowerLowNotification is sent if the transceiver TxPower falls below the threshold. To enable the device to send this notification: cienaCesPortXcvrTxPowerChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber and cienaCesPortXcvrNotifPortName." ::= { cienaCesPortXcvrMIBNotifications 16 } -- 1.3.6.1.4.1.1271.2.2.9.0.17 cienaCesPortXcvrTxPowerNormalNotification NOTIFICATION-TYPE OBJECTS { cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber, cienaCesPortXcvrNotifPortName } STATUS current DESCRIPTION "A cienaCesPortXcvrTxPowerNormalNotification is sent when the transceiver TxPower returns to normal state. To enable the device to send this notification: cienaCesPortXcvrTxPowerChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber and cienaCesPortXcvrNotifPortName." ::= { cienaCesPortXcvrMIBNotifications 17 } -- 1.3.6.1.4.1.1271.2.2.9.0.18 cienaCesPortXcvrRxPowerHighNotification NOTIFICATION-TYPE OBJECTS { cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber, cienaCesPortXcvrNotifPortName } STATUS current DESCRIPTION "A cienaCesPortXcvrRxPowerHighNotification is sent if the transceiver RxPower exceeds the threshold. To enable the device to send this notification: cienaCesPortXcvrRxPowerChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber and cienaCesPortXcvrNotifPortName." ::= { cienaCesPortXcvrMIBNotifications 18 } -- 1.3.6.1.4.1.1271.2.2.9.0.19 cienaCesPortXcvrRxPowerLowNotification NOTIFICATION-TYPE OBJECTS { cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber, cienaCesPortXcvrNotifPortName } STATUS current DESCRIPTION "A cienaCesPortXcvrRxPowerLowNotification is sent if the transceiver RxPower falls below the the threshold. To enable the device to send this notification: cienaCesPortXcvrRxPowerChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, cienaCesPortAllTrapState needs to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber and cienaCesPortXcvrNotifPortName." ::= { cienaCesPortXcvrMIBNotifications 19 } -- 1.3.6.1.4.1.1271.2.2.9.0.20 cienaCesPortXcvrRxPowerNormalNotification NOTIFICATION-TYPE OBJECTS { cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber, cienaCesPortXcvrNotifPortName } STATUS current DESCRIPTION "A cienaCesPortXcvrRxPowerNormalNotification is sent when the transceiver RxPower returns to normal state. To enable the device to send this notification: cienaCesPortXcvrRxPowerChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState needs to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber and cienaCesPortXcvrNotifPortName." ::= { cienaCesPortXcvrMIBNotifications 20 } -- 1.3.6.1.4.1.1271.2.2.9.0.21 cienaCesPortXcvrSpeedInfoMissingNotification NOTIFICATION-TYPE OBJECTS { cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber, cienaCesPortXcvrNotifPortName } STATUS current DESCRIPTION "A cienaCesPortXcvrSpeedInfoMissingNotification is sent if the transceiver speed information is not found. To enable the device to send this notification: cienaCesPortXcvrSpeedInfoTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber and cienaCesPortXcvrNotifPortName." ::= { cienaCesPortXcvrMIBNotifications 21 } -- 1.3.6.1.4.1.1271.2.2.9.0.22 cienaCesPortXcvrUncertifiedNotification NOTIFICATION-TYPE OBJECTS { cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber, cienaCesPortXcvrNotifPortName } STATUS current DESCRIPTION "A cienaCesPortXcvrUncertifiedNotification is sent if the transceiver is not certified for use by Ciena. To enable the device to send this notification: cienaCesPortXcvrUncertifiedTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cesPortAllTrapState need to be set to enabled. cienaCesPortXcvrUncertifiedTrapState is set to disabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber and cienaCesPortXcvrNotifPortName." ::= { cienaCesPortXcvrMIBNotifications 22 } -- 1.3.6.1.4.1.1271.2.2.9.0.23 cienaCesPortXcvrRxPowerHighWarningNotification NOTIFICATION-TYPE OBJECTS { cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber, cienaCesPortXcvrNotifPortName } STATUS current DESCRIPTION "A cienaCesPortXcvrRxPowerHighWarningNotification is sent if the transceiver RxPower exceeds the threshold. To enable the device to send this notification: cienaCesPortXcvrRxPowerChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber and cienaCesPortXcvrNotifPortName." ::= { cienaCesPortXcvrMIBNotifications 23 } -- 1.3.6.1.4.1.1271.2.2.9.0.24 cienaCesPortXcvrRxPowerLowWarningNotification NOTIFICATION-TYPE OBJECTS { cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber, cienaCesPortXcvrNotifPortName } STATUS current DESCRIPTION "A cienaCesPortXcvrRxPowerLowWarningNotification is sent if the transceiver RxPower falls below the the threshold. To enable the device to send this notification: cienaCesPortXcvrRxPowerChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, cienaCesPortAllTrapState needs to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber and cienaCesPortXcvrNotifPortName." ::= { cienaCesPortXcvrMIBNotifications 24 } -- 1.3.6.1.4.1.1271.2.2.9.0.25 cienaCesPortXcvrTxPowerHighWarningNotification NOTIFICATION-TYPE OBJECTS { cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber, cienaCesPortXcvrNotifPortName } STATUS current DESCRIPTION "A cienaCesPortXcvrTxPowerHighWarningNotification is sent if the transceiver TxPower exceeds the threshold. To enable the device to send this notification: cienaCesPortXcvrTxPowerChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber and cienaCesPortXcvrNotifPortName." ::= { cienaCesPortXcvrMIBNotifications 25 } -- 1.3.6.1.4.1.1271.2.2.9.0.26 cienaCesPortXcvrTxPowerLowWarningNotification NOTIFICATION-TYPE OBJECTS { cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber, cienaCesPortXcvrNotifPortName } STATUS current DESCRIPTION "A cienaCesPortXcvrTxPowerLowWarningNotification is sent if the transceiver TxPower falls below the the threshold. To enable the device to send this notification: cienaCesPortXcvrTxPowerChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, cienaCesPortAllTrapState needs to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber and cienaCesPortXcvrNotifPortName." ::= { cienaCesPortXcvrMIBNotifications 26 } END -- -- CIENA-CES-PORT-XCVR-MIB --