--  ===================================================================================
--  File	      : FIBROLAN-MIB-ACM110.mib
--  Description       : Private MIB file for FibroLAN MetroStar I system - ACM110-12/14
--  By                : Shamir Stein
--  MIB Version       : 1.1
--  MetroStar Version : 1.6.2/build 12
--  Date              : March 27, 2008
--  ===================================================================================
--
--
-- Copyright Fibrolan, 2008. All rights reserved.
--
-- Reproduction of this document is authorized on condition that this
-- copyright notice is included.
--
FIBROLAN-MIB-ACM110		   DEFINITIONS ::= BEGIN

	 IMPORTS
		enterprises, OBJECT-TYPE, MODULE-IDENTITY		  FROM SNMPv2-SMI 
		DisplayString						              FROM SNMPv2-TC --FROM RFC1213-MIB
		MODULE-COMPLIANCE, OBJECT-GROUP					  FROM SNMPv2-CONF
		flMsChassisMvIndex, flMsChassisModuleMvIndex	  FROM FIBROLAN-MIB-METRO-STAR-MV
		Counter											  FROM RFC1155-SMI;


  flAcm110Mv  MODULE-IDENTITY
       LAST-UPDATED "0803270000Z"  
       ORGANIZATION "Fibrolan ltd"
       CONTACT-INFO
         "http://www.fibrolan.com"
       DESCRIPTION
         "The MIB module to describe MCM1XX interface objects.
          Copyright (C) Fibrolan Ltd (2008)."
	::= { enterprises 4467 100 500 10 30 120}


    -- conformance information
     flAcm110MIBConformance
                   OBJECT IDENTIFIER ::= { flAcm110Mv  1 }

     flAcm110MIBCompliances		OBJECT IDENTIFIER ::= { flAcm110MIBConformance 1 }
     flAcm110MIBGroups			OBJECT IDENTIFIER ::= { flAcm110MIBConformance 2 }


	-- compliance statements
     flAcm110MIBCompliance MODULE-COMPLIANCE
              STATUS  current
              DESCRIPTION
                      "The compliance statement for flMetroStar entities
                      which implement the flAcm110Mv MIB."
			  MODULE FIBROLAN-MIB-METRO-STAR-MV
				  MANDATORY-GROUPS{ flMsChassisGroup, flMsChassisModulesGroup }
              MODULE  -- this module
                  MANDATORY-GROUPS { flAcm110MvGlobalGroup,
									 flAcm110MvPortsGroup, 
									 flAcm110MvVlansDefGroup,
									 flAcm110MvVlansTableGroup,
									 flAcm110MvVlansPortsGroup,
									 flAcm110MvPrioritiesConfigGroup,
									 flAcm110MvPriorityDscpGroup,
									 flAcm110MvPortPriorityTableGroup,
									 flAcm110MvGlobalMacsGroup,
									 flAcm110MvDynamicMacsGroup,
									 flAcm110MvStaticMacsGroup,
									 flAcm110MvRxErrStatisticsGroup,
									 flAcm110MvRxGoodStatisticsGroup,
									 flAcm110MvTxGoodStatisticsGroup,
									 flAcm110MvRxTotalStatisticsGroup,
									 flAcm110MvTxTotalStatisticsGroup,
									 flAcm110MvTxCollisionStatisticsGroup }
              ::= { flAcm110MIBCompliances 1 }


     flAcm110MvGlobalGroup	OBJECT-GROUP
	        OBJECTS		{ flAcm110MvGlobalConfigIndex,
						  flAcm110MvGlobalBufferShare,
			              flAcm110MvGlobalMulticastProtect,
             			  flAcm110MvGlobalBroadcastRate,
			              flAcm110MvGlobalMaxPacketSize,
			              flAcm110MvGlobalSleLogic,
			              flAcm110MvGlobalSlePort1,
			              flAcm110MvGlobalSlePort2,
			              flAcm110MvGlobalSlePort3, --for acm110-14 only
			              flAcm110MvGlobalSlePort4 } --for acm110-14 only
            STATUS  current
            DESCRIPTION
                    "A collection of objects providing basic
                    instrumentation of the MetroStar ACM110-12/14 module entity."
            ::= { flAcm110MIBGroups 1 }

     flAcm110MvPortsGroup	OBJECT-GROUP
	        OBJECTS		{ flAcm110MvPortNumber,
				          flAcm110MvPortType,
			              flAcm110MvPortLink,
						  flAcm110MvPortDescription,
						  flAcm110MvPortAutoNego,
				          flAcm110MvPortDuplex,
						  flAcm110MvPortDatarate,
						  flAcm110MvPortEnabled,
						  flAcm110MvPortAutoCross,
					      flAcm110MvPortMdix,
						  flAcm110MvPortFef,
						  flAcm110MvPortReset,
						  flAcm110MvPortBroadcastProtect }
            STATUS  current
            DESCRIPTION
                    "A collection of objects providing basic
                    instrumentation of the MetroStar ACM110-12/14 vlan."
            ::= { flAcm110MIBGroups 2 }

     flAcm110MvVlansDefGroup	OBJECT-GROUP
	        OBJECTS		{ flAcm110MvVlanConfigIndex,
						  flAcm110MvVlan8021q,
			              flAcm110MvVlanNullVidReplace,
			              flAcm110MvCreateDefaultVlans,
			              flAcm110MvDeleteAllVlans }
            STATUS  current
            DESCRIPTION
                    "A collection of objects providing basic
                    instrumentation of the MetroStar ACM110-12/14 vlans config."
            ::= { flAcm110MIBGroups 3 }

     flAcm110MvVlansTableGroup	OBJECT-GROUP
	        OBJECTS		{ flAcm110MvVlanFid,
						  flAcm110MvVlanVid,
 			              flAcm110MvVlanName,
			              flAcm110MvVlanPort1Member,
			              flAcm110MvVlanPort2Member,
			              flAcm110MvVlanPort3Member,
			              flAcm110MvVlanPort4Member, --only in acm110-14
 			              flAcm110MvVlanPort5Member, --only in acm110-14
 			              flAcm110MvVlanTableStatus }
            STATUS  current
            DESCRIPTION
                    "A collection of objects providing basic
                    instrumentation of the MetroStar ACM110-12/14 vlans table."
            ::= { flAcm110MIBGroups 4 }

     flAcm110MvVlansPortsGroup	OBJECT-GROUP
	        OBJECTS		{ flAcm110MvPortIngressFilter,
						  flAcm110MvPortTagInsertion,
			              flAcm110MvPortTagRemoval,
			              flAcm110MvPortVid,
			              flAcm110MvPortDiscardNonPvid }
            STATUS  current
            DESCRIPTION
                    "A collection of objects providing basic
                    instrumentation of the MetroStar ACM110-12/14 vlans table ports."
            ::= { flAcm110MIBGroups 5 }

     flAcm110MvPrioritiesConfigGroup	OBJECT-GROUP
	        OBJECTS		{ flAcm110MvPriorityIndex,
						  flAcm110Mv8021pBase,
		                  flAcm110MvPriorityRatio }
            STATUS  current
            DESCRIPTION
                    "A collection of objects providing basic
                    instrumentation of the MetroStar ACM110-12/14 priority config."
            ::= { flAcm110MIBGroups 6 }

    flAcm110MvPriorityDscpGroup   OBJECT-GROUP
	        OBJECTS		{ flAcm110MvDscpCode,
						  flAcm110MvDscpCodePriority }
            STATUS  current
            DESCRIPTION
                    "A collection of objects providing basic
                    instrumentation of the MetroStar ACM110-12/14 DSCP priority table."
            ::= { flAcm110MIBGroups 7 }

    flAcm110MvPortPriorityTableGroup   OBJECT-GROUP
	        OBJECTS		{ flAcm110MvPortPriority,
						  flAcm110MvPort8021pClassific,
						  flAcm110MvPortDiffServClassific,
						  flAcm110MvPortUserPriority }
            STATUS  current
            DESCRIPTION
                    "A collection of objects providing basic
                    instrumentation of the MetroStar ACM110-12/14 ports priority table."
            ::= { flAcm110MIBGroups 8 }


    flAcm110MvGlobalMacsGroup   OBJECT-GROUP
	        OBJECTS		{ flAcm110MvGlobalMacIndex,
						  flAcm110MvClearDynamicMacTable,
						  flAcm110MvClearStaticMacTable }
            STATUS  current
            DESCRIPTION
                    "A collection of objects providing basic
                    instrumentation of the MetroStar ACM110-12/14 global MAC address definitions."
            ::= { flAcm110MIBGroups 9 }

    flAcm110MvDynamicMacsGroup   OBJECT-GROUP
	        OBJECTS		{ flAcm110MvDynamicEntryNumber,
						  flAcm110MvDynamicMacAddress,
						  flAcm110MvDynamicSrcPort,
						  flAcm110MvDynamicFid }
            STATUS  current
            DESCRIPTION
                    "A collection of objects providing basic
                    instrumentation of the MetroStar ACM110-12/14 dynamic MAC address table."
            ::= { flAcm110MIBGroups 10 }

    flAcm110MvStaticMacsGroup   OBJECT-GROUP
	        OBJECTS		{ flAcm110MvStaticEntryNumber,
						  flAcm110MvStaticMacAddress,
						  flAcm110MvFwdPort1,
						  flAcm110MvFwdPort2,
						  flAcm110MvFwdPort3,
						  flAcm110MvFwdPort4,
						  flAcm110MvFwdPort5,
						  flAcm110MvFid,
						  flAcm110MvStaticUseFid,
						  flAcm110MvStaticTableStatus }
            STATUS  current
            DESCRIPTION
                    "A collection of objects providing basic
                    instrumentation of the MetroStar ACM110-12/14 static MAC address table."
            ::= { flAcm110MIBGroups 11 }

    flAcm110MvRxErrStatisticsGroup   OBJECT-GROUP
	        OBJECTS		{ flAcm110MvRxUndersizePckt,
						  flAcm110MvRxFragmentPckt,
						  flAcm110MvRxOversizePckt,
						  flAcm110MvRxCrcErrorPckt,
						  flAcm110MvRxAlignmentErrorPckt,
						  flAcm110MvRxRefreshCounters,
						  flAcm110MvRxClearCounters }
            STATUS  current
            DESCRIPTION
                    "A collection of objects providing basic
                    instrumentation of the MetroStar ACM110-12/14 Rx error packets."
            ::= { flAcm110MIBGroups 12 }

    flAcm110MvRxGoodStatisticsGroup   OBJECT-GROUP
	        OBJECTS		{ flAcm110MvRxUnicastPackets,
						  flAcm110MvRxMulticastPackets,
			              flAcm110MvRxBroadcastPackets,
			              flAcm110MvRxMacControlPackets,
			              flAcm110MvRxPausePackets,
			              flAcm110MvRxGoodRefreshCounters,
			              flAcm110MvRxGoodClearCounters }
            STATUS  current
            DESCRIPTION
                    "A collection of objects providing basic
                    instrumentation of the MetroStar ACM110-12/14 Rx good packets."
            ::= { flAcm110MIBGroups 13 }

    flAcm110MvTxGoodStatisticsGroup   OBJECT-GROUP
	        OBJECTS		{ flAcm110MvTxUnicastPackets,
						  flAcm110MvTxMulticastPackets,
			              flAcm110MvTxBroadcastPackets,
			              flAcm110MvTxPausePackets,
			              flAcm110MvTxGoodRefreshCounters,
			              flAcm110MvTxGoodClearCounters }
            STATUS  current
            DESCRIPTION
                    "A collection of objects providing basic
                    instrumentation of the MetroStar ACM110-12/14 Tx good packets."
            ::= { flAcm110MIBGroups 14 }

    flAcm110MvRxTotalStatisticsGroup   OBJECT-GROUP
	        OBJECTS		{ flAcm110MvRxDroppedPackets,
			              flAcm110MvRx64BytesPackets,
			              flAcm110MvRx65-127BytesPackets,
			              flAcm110MvRx128-255BytesPackets,
			              flAcm110MvRx256-511BytesPackets,
			              flAcm110MvRx512-1023BytesPackets,
			              flAcm110MvRx1024-MaxBytesPackets,
			              flAcm110MvRxTotalRefreshCounters,
			              flAcm110MvRxTotalClearCounters }
            STATUS  current
            DESCRIPTION
                    "A collection of objects providing basic
                    instrumentation of the MetroStar ACM110-12/14 Rx total packets."
            ::= { flAcm110MIBGroups 15 }

    flAcm110MvTxTotalStatisticsGroup   OBJECT-GROUP
	        OBJECTS		{ flAcm110MvTxDroppedPackets,
						  flAcm110MvTxTotalRefreshCounters,
						  flAcm110MvTxTotalClearCounters }
            STATUS  current
            DESCRIPTION
                    "A collection of objects providing basic
                    instrumentation of the MetroStar ACM110-12/14 Tx total packets."
            ::= { flAcm110MIBGroups 16 }

    flAcm110MvTxCollisionStatisticsGroup   OBJECT-GROUP
	        OBJECTS		{ flAcm110MvTxTotalCols,
						  flAcm110MvTxLateCols,
						  flAcm110MvTxExcessiveCols,
						  flAcm110MvTxSingleCols,
						  flAcm110MvTxMultipleCols,
						  flAcm110MvTxColRefreshCounters,
						  flAcm110MvTxColClearCounters }
            STATUS  current
            DESCRIPTION
                    "A collection of objects providing basic
                    instrumentation of the MetroStar ACM110-12/14 Tx collisons."
            ::= { flAcm110MIBGroups 17 }


-- ************************************************************
-- ************************************************************
-- FibroLan Object Identifier Definition
-- ************************************************************
-- ************************************************************

fibrolan            OBJECT IDENTIFIER ::= { enterprises       4467 }

fibrolanSNMP        OBJECT IDENTIFIER ::= { fibrolan           100 }

flMetroStarMv 		OBJECT IDENTIFIER ::=  { fibrolanSNMP      500 }

flMsChassisMv		OBJECT IDENTIFIER ::=  { flMetroStarMv	    10 }

flMsModuleMv		OBJECT IDENTIFIER ::=  { flMsChassisMv	    30 }

--flAcm110Mv			OBJECT IDENTIFIER ::=  { flMsModuleMv      120 }


flAcm110MvGlobal			OBJECT IDENTIFIER ::= { flAcm110Mv	    10 }
flAcm110MvPorts				OBJECT IDENTIFIER ::= { flAcm110Mv	    20 }
flAcm110MvVlan			    OBJECT IDENTIFIER ::= { flAcm110Mv	    30 }
flAcm110MvPriority		    OBJECT IDENTIFIER ::= { flAcm110Mv	    40 }
flAcm110MvMac			    OBJECT IDENTIFIER ::= { flAcm110Mv	    50 }
flAcm110MvStatistics		OBJECT IDENTIFIER ::= { flAcm110Mv	    60 }


-- ************************************************************
-- ************************************************************


      EntryStatus ::= INTEGER
                       { 
						 valid(1),
                         createRequest(2),
                         underCreation(3),
                         invalid(4)
                       }


-- ************************************************************
-- ************************************************************

-- ************************************************************
-- ************************************************************
-- ************************************************************
-- Global device configuration group
-- ************************************************************
-- ************************************************************
-- ************************************************************
     flAcm110MvGlobalConfigTable               OBJECT-TYPE
         SYNTAX  SEQUENCE OF FlAcm110MvGlobalConfigEntry
         MAX-ACCESS   not-accessible
         STATUS  current
         DESCRIPTION
         "This table provides the device's global configuration"
     ::= { flAcm110MvGlobal 1 }

     flAcm110MvGlobalConfigEntry				OBJECT-TYPE
         SYNTAX  FlAcm110MvGlobalConfigEntry
         MAX-ACCESS   not-accessible
         STATUS  current
         DESCRIPTION
         "The entries of the table"
         INDEX { flMsChassisMvIndex, 
		         flMsChassisModuleMvIndex,
  				 flAcm110MvGlobalConfigIndex }
     ::= { flAcm110MvGlobalConfigTable 1 }


		FlAcm110MvGlobalConfigEntry ::= SEQUENCE
		{
			 flAcm110MvGlobalConfigIndex			INTEGER,
			 flAcm110MvGlobalBufferShare			INTEGER,
			 flAcm110MvGlobalMulticastProtect		INTEGER,
			 flAcm110MvGlobalBroadcastRate			INTEGER,
			 flAcm110MvGlobalMaxPacketSize			INTEGER,
			 flAcm110MvGlobalSleLogic				INTEGER,
			 flAcm110MvGlobalSlePort1				INTEGER,
			 flAcm110MvGlobalSlePort2				INTEGER,
			 flAcm110MvGlobalSlePort3				INTEGER, --for acm110-14 only
			 flAcm110MvGlobalSlePort4				INTEGER  --for acm110-14 only
		}

     flAcm110MvGlobalConfigIndex				OBJECT-TYPE
		 SYNTAX    INTEGER (1..10)
		 MAX-ACCESS     read-only
		 STATUS    current
		 DESCRIPTION
		 "Table index" 
	 ::= { flAcm110MvGlobalConfigEntry 1 }

     flAcm110MvGlobalBufferShare				OBJECT-TYPE
		 SYNTAX    INTEGER {
								off		(1),
								on		(2)
						   }
         MAX-ACCESS     read-write
         STATUS    current
         DESCRIPTION
         "Buffer pool sharing mode"
	 ::= { flAcm110MvGlobalConfigEntry 2 }

     flAcm110MvGlobalMulticastProtect			OBJECT-TYPE
		 SYNTAX    INTEGER {
								off		(1),
								on		(2)
						   }
         MAX-ACCESS     read-write
         STATUS    current
         DESCRIPTION
         "Multicast storm protection mode"
	 ::= { flAcm110MvGlobalConfigEntry 3 }

     flAcm110MvGlobalBroadcastRate			OBJECT-TYPE
		 SYNTAX    INTEGER {
								pct5		(1),
								pct10		(2),
								pct15		(3),
								pct20		(4),
								pct25		(5)
						   }
         MAX-ACCESS     read-write
         STATUS    current
         DESCRIPTION
         "Broadcast storm protection rate in percents"
	 ::= { flAcm110MvGlobalConfigEntry 4 }

     flAcm110MvGlobalMaxPacketSize			OBJECT-TYPE
		 SYNTAX    INTEGER {
								bytes1522		(1),
								bytes1536		(2),
								bytes1916		(3)
						   }
         MAX-ACCESS     read-write
         STATUS    current
         DESCRIPTION
         "Maximum allowed receive packet size in bytes"
	 ::= { flAcm110MvGlobalConfigEntry 5 }

     flAcm110MvGlobalSleLogic				OBJECT-TYPE
		 SYNTAX    INTEGER {
								or		(1),
								and		(2)
						   }
         MAX-ACCESS     read-write
         STATUS    current
         DESCRIPTION
         "SLE logic function: 'AND' or 'OR'"
	 ::= { flAcm110MvGlobalConfigEntry 6 }

     flAcm110MvGlobalSlePort1				OBJECT-TYPE
		 SYNTAX    INTEGER {
								off		(1),
								on		(2)
						   }
         MAX-ACCESS     read-write
         STATUS    current
         DESCRIPTION
         "FO port 1 participation in the SLE function"
	 ::= { flAcm110MvGlobalConfigEntry 7 }

     flAcm110MvGlobalSlePort2				OBJECT-TYPE
		 SYNTAX    INTEGER {
								off		(1),
								on		(2)
						   }
         MAX-ACCESS     read-write
         STATUS    current
         DESCRIPTION
         "FO port 2 participation in the SLE function"
	 ::= { flAcm110MvGlobalConfigEntry 8 }

     flAcm110MvGlobalSlePort3				OBJECT-TYPE
		 SYNTAX    INTEGER {
								off		(1),
								on		(2)
						   }
         MAX-ACCESS     read-write
         STATUS    current
         DESCRIPTION
         "FO port 2 participation in the SLE function"
	 ::= { flAcm110MvGlobalConfigEntry 9 }

     flAcm110MvGlobalSlePort4				OBJECT-TYPE
		 SYNTAX    INTEGER {
								off		(1),
								on		(2)
						   }
         MAX-ACCESS     read-write
         STATUS    current
         DESCRIPTION
         "FO port 2 participation in the SLE function"
	 ::= { flAcm110MvGlobalConfigEntry 10 }


-- ************************************************************
-- ************************************************************
-- ************************************************************
-- Device's ports configuration group
-- ************************************************************
-- ************************************************************
-- ************************************************************

-- ************************************************************
-- Port configuration table
-- ************************************************************

	 flAcm110MvPortConfigTable               OBJECT-TYPE
         SYNTAX  SEQUENCE OF FlAcm110MvPortConfigEntry
         MAX-ACCESS   not-accessible
         STATUS  current
         DESCRIPTION
         "This table provides the ports' basic configuration"
     ::= { flAcm110MvPorts 1 }

     flAcm110MvPortConfigEntry				OBJECT-TYPE
         SYNTAX  FlAcm110MvPortConfigEntry
         MAX-ACCESS   not-accessible
         STATUS  current
         DESCRIPTION
         "The entries of the table"
         INDEX { flMsChassisMvIndex,
				 flMsChassisModuleMvIndex,
				 flAcm110MvPortNumber }
     ::= { flAcm110MvPortConfigTable 1 }

		FlAcm110MvPortConfigEntry ::= SEQUENCE
		{
			 flAcm110MvPortNumber				INTEGER,
			 flAcm110MvPortType					INTEGER,
			 flAcm110MvPortLink					INTEGER,
--			 flAcm110MvRemoteDeviceType			DisplayString,
--			 flAcm110MvRemoteDeviceState		INTEGER,     
			 flAcm110MvPortDescription			DisplayString,
			 flAcm110MvPortAutoNego				INTEGER,
			 flAcm110MvPortDuplex				INTEGER,
			 flAcm110MvPortDatarate				INTEGER,
			 flAcm110MvPortEnabled				INTEGER,
			 flAcm110MvPortAutoCross			INTEGER,
			 flAcm110MvPortMdix					INTEGER,
			 flAcm110MvPortFef					INTEGER,
			 flAcm110MvPortReset				INTEGER,
			 flAcm110MvPortBroadcastProtect		INTEGER
		}


	 flAcm110MvPortNumber				OBJECT-TYPE
		 SYNTAX    INTEGER (1..5)
		 MAX-ACCESS     read-only
         STATUS    current
        DESCRIPTION
         "Port number"
	 ::= { flAcm110MvPortConfigEntry 1 }

     flAcm110MvPortType				OBJECT-TYPE
		 SYNTAX    INTEGER {
								tp		(1),
								fo		(2),
								other	(9999)
						   }
         MAX-ACCESS     read-only
         STATUS    current
         DESCRIPTION
         "Port type"
	 ::= { flAcm110MvPortConfigEntry  2 }

     flAcm110MvPortLink				OBJECT-TYPE
		 SYNTAX    INTEGER {
								off		(1),
								on		(2),
								kld     (3)
						   }
         MAX-ACCESS     read-only
         STATUS    current
         DESCRIPTION
         "Port's link status"
	 ::= { flAcm110MvPortConfigEntry  3 }

     flAcm110MvPortDescription			OBJECT-TYPE
		 SYNTAX    DisplayString
		 MAX-ACCESS     read-write
		 STATUS    current
		 DESCRIPTION
		 "Port's textual description - up to 40 characters" 
	 ::= { flAcm110MvPortConfigEntry  4 }

     flAcm110MvPortAutoNego				OBJECT-TYPE
		 SYNTAX    INTEGER {
								disabled		(1),
								enabled			(2)
						   }
         MAX-ACCESS     read-write
         STATUS    current
         DESCRIPTION
         "Port's Auto-Negotiation mode"
	 ::= { flAcm110MvPortConfigEntry  5 }

     flAcm110MvPortDuplex				OBJECT-TYPE
		 SYNTAX    INTEGER {
								hdx		(1),
								fdx		(2),
								n-a		(3)
						   }
         MAX-ACCESS     read-write
         STATUS    current
         DESCRIPTION
         "Port's duplex mode"
	 ::= { flAcm110MvPortConfigEntry  6 }

     flAcm110MvPortDatarate				OBJECT-TYPE
		 SYNTAX    INTEGER {
								m10		(1),
								m100	(2),
								n-a		(3)
						   }
         MAX-ACCESS     read-write
         STATUS    current
         DESCRIPTION
         "Port's data rate mode - 10/100Mbps"
	 ::= { flAcm110MvPortConfigEntry  7 }

     flAcm110MvPortEnabled				OBJECT-TYPE
		 SYNTAX    INTEGER {
								disabled		(1),
								enabled			(2)
						   }
         MAX-ACCESS     read-write
         STATUS    current
         DESCRIPTION
         "Port enabling or disabling"
	 ::= { flAcm110MvPortConfigEntry  8 }

     flAcm110MvPortAutoCross				OBJECT-TYPE
		 SYNTAX    INTEGER {
								off		(1),
								on		(2)
						   }
         MAX-ACCESS     read-write
         STATUS    current
         DESCRIPTION
         "Port's Auto-cross mode"
	 ::= { flAcm110MvPortConfigEntry  9 }

     flAcm110MvPortMdix				OBJECT-TYPE
		 SYNTAX    INTEGER {
								mdi		(1),
								mdix	(2)
						   }
         MAX-ACCESS     read-write
         STATUS    current
         DESCRIPTION
         "Port's MDI mode - MDI or MDIX"
	 ::= { flAcm110MvPortConfigEntry  10 }

     flAcm110MvPortFef				OBJECT-TYPE
		 SYNTAX    INTEGER {
								off		(1),
								on		(2)
						   }
         MAX-ACCESS     read-write
         STATUS    current
         DESCRIPTION
         "Port's FEF mode (only FO)"
	 ::= { flAcm110MvPortConfigEntry 11 }

     flAcm110MvPortReset				OBJECT-TYPE
		 SYNTAX    INTEGER {
								normal		(1),
								reset		(2)
						   }
         MAX-ACCESS     read-write
         STATUS    current
         DESCRIPTION
         "Port's reset"
	 ::= { flAcm110MvPortConfigEntry  12 }

     flAcm110MvPortBroadcastProtect				OBJECT-TYPE
		 SYNTAX    INTEGER {
								off		(1),
								on		(2)
						   }
         MAX-ACCESS     read-write
         STATUS    current
         DESCRIPTION
         "Port's broadcast storm protection mode"
	 ::= { flAcm110MvPortConfigEntry  13 }


-- ************************************************************
-- ************************************************************
-- Port bandwidth configuration table
-- ************************************************************
-- ************************************************************

	 flAcm110MvPortBwConfigTable               OBJECT-TYPE
         SYNTAX  SEQUENCE OF FlAcm110MvPortBwConfigEntry
         MAX-ACCESS   not-accessible
         STATUS  current
         DESCRIPTION
         "This table provides the ports' bandwidth configuration"
     ::= { flAcm110MvPorts 2 }

     flAcm110MvPortBwConfigEntry				OBJECT-TYPE
         SYNTAX  FlAcm110MvPortBwConfigEntry
         MAX-ACCESS   not-accessible
         STATUS  current
         DESCRIPTION
         "The entries of the table"
         INDEX { flMsChassisMvIndex,
				 flMsChassisModuleMvIndex,
				 flAcm110MvPortNumber }
     ::= { flAcm110MvPortBwConfigTable 1 }

		FlAcm110MvPortBwConfigEntry ::= SEQUENCE
		{
			 flAcm110MvPortRxHighBw				INTEGER,
			 flAcm110MvPortTxHighBw				INTEGER,
			 flAcm110MvPortRxLowBw				INTEGER,
			 flAcm110MvPortTxLowBw				INTEGER,
			 flAcm110MvPortRxDiffBw				INTEGER,
			 flAcm110MvPortRxHighFlowControl	INTEGER,
			 flAcm110MvPortRxLowFlowControl		INTEGER,
			 flAcm110MvPortTxDiffBw				INTEGER
		}


     flAcm110MvPortRxHighBw			OBJECT-TYPE
		 SYNTAX    INTEGER {
								k256		(129),
								k512		(130),
								m01			(1),
								m02			(2),
								m03			(3),
								m04			(4),
								m05			(5),
								m06			(6),
								m07			(7),
								m08			(8),
								m09			(9),
								m10			(10),
								m20			(20),
								m30			(30),
								m40			(40),
								m50			(50),
								m60			(60),
								m70			(70),
								m80			(80),
								m90			(90),
								m100		(100)
						   }
		 MAX-ACCESS     read-write
		 STATUS    current
		 DESCRIPTION
		 "Port's receive high priority bandwidth" 
	 ::= { flAcm110MvPortBwConfigEntry 1 }

     flAcm110MvPortTxHighBw			OBJECT-TYPE
		 SYNTAX    INTEGER {
								k256		(129),
								k512		(130),
								m01			(1),
								m02			(2),
								m03			(3),
								m04			(4),
								m05			(5),
								m06			(6),
								m07			(7),
								m08			(8),
								m09			(9),
								m10			(10),
								m20			(20),
								m30			(30),
								m40			(40),
								m50			(50),
								m60			(60),
								m70			(70),
								m80			(80),
								m90			(90),
								m100		(100)
						   }
		 MAX-ACCESS     read-write
		 STATUS    current
		 DESCRIPTION
		 "Port's transmit high priority bandwidth" 
	 ::= { flAcm110MvPortBwConfigEntry 2 }

     flAcm110MvPortRxLowBw			OBJECT-TYPE
		 SYNTAX    INTEGER {
								k256		(129),
								k512		(130),
								m01			(1),
								m02			(2),
								m03			(3),
								m04			(4),
								m05			(5),
								m06			(6),
								m07			(7),
								m08			(8),
								m09			(9),
								m10			(10),
								m20			(20),
								m30			(30),
								m40			(40),
								m50			(50),
								m60			(60),
								m70			(70),
								m80			(80),
								m90			(90),
								m100		(100)
						   }
		 MAX-ACCESS     read-write
		 STATUS    current
		 DESCRIPTION
		 "Port's receive low priority bandwidth" 
	 ::= { flAcm110MvPortBwConfigEntry 3 }

     flAcm110MvPortTxLowBw			OBJECT-TYPE
		 SYNTAX    INTEGER {
								k256		(129),
								k512		(130),
								m01			(1),
								m02			(2),
								m03			(3),
								m04			(4),
								m05			(5),
								m06			(6),
								m07			(7),
								m08			(8),
								m09			(9),
								m10			(10),
								m20			(20),
								m30			(30),
								m40			(40),
								m50			(50),
								m60			(60),
								m70			(70),
								m80			(80),
								m90			(90),
								m100		(100)
						   }
		 MAX-ACCESS     read-write
		 STATUS    current
		 DESCRIPTION
		 "Port's transmit low priority bandwidth" 
	 ::= { flAcm110MvPortBwConfigEntry 4 }

     flAcm110MvPortRxDiffBw			OBJECT-TYPE
		 SYNTAX    INTEGER {
								off			(1),
								on			(2)
						   }
		 MAX-ACCESS     read-write
		 STATUS    current
		 DESCRIPTION
		 "Port's differential (priority) receive bandwidth mode" 
	 ::= { flAcm110MvPortBwConfigEntry 5 }

     flAcm110MvPortRxHighFlowControl			OBJECT-TYPE
		 SYNTAX    INTEGER {
								off			(1),
								on			(2)
						   }
		 MAX-ACCESS     read-write
		 STATUS    current
		 DESCRIPTION
		 "Port's high priority receive flow control mode" 
	 ::= { flAcm110MvPortBwConfigEntry 6 }

     flAcm110MvPortRxLowFlowControl			OBJECT-TYPE
		 SYNTAX    INTEGER {
								off			(1),
								on			(2)
						   }
		 MAX-ACCESS     read-write
		 STATUS    current
		 DESCRIPTION
		 "Port's low priority receive flow control mode" 
	 ::= { flAcm110MvPortBwConfigEntry 7 }

     flAcm110MvPortTxDiffBw			OBJECT-TYPE
		 SYNTAX    INTEGER {
								off			(1),
								on			(2)
						   }
		 MAX-ACCESS     read-write
		 STATUS    current
		 DESCRIPTION
		 "Port's differential (priority) transmit bandwidth mode" 
	 ::= { flAcm110MvPortBwConfigEntry 8 }


-- ************************************************************
-- ************************************************************
-- ************************************************************
-- Device's VLAN configuration table
-- ************************************************************
-- ************************************************************
-- ************************************************************


	 flAcm110MvGlobalVlanConfigTable               OBJECT-TYPE
         SYNTAX  SEQUENCE OF FlAcm110MvGlobalVlanConfigEntry
         MAX-ACCESS   not-accessible
         STATUS  current
         DESCRIPTION
         "This table provides the ports' bandwidth configuration"
     ::= { flAcm110MvVlan 1 }

     flAcm110MvGlobalVlanConfigEntry				OBJECT-TYPE
         SYNTAX  FlAcm110MvGlobalVlanConfigEntry
         MAX-ACCESS   not-accessible
         STATUS  current
         DESCRIPTION
         "The entries of the table"
         INDEX { flMsChassisMvIndex,
				 flMsChassisModuleMvIndex,
				 flAcm110MvVlanConfigIndex }
     ::= { flAcm110MvGlobalVlanConfigTable  1 }

		FlAcm110MvGlobalVlanConfigEntry ::= SEQUENCE
		{
			flAcm110MvVlanConfigIndex			INTEGER,
			flAcm110MvVlan8021q					INTEGER,
			flAcm110MvVlanNullVidReplace		INTEGER,
			flAcm110MvCreateDefaultVlans        INTEGER,
			flAcm110MvDeleteAllVlans			INTEGER
		}


     flAcm110MvVlanConfigIndex			OBJECT-TYPE
		 SYNTAX    INTEGER (1..5)
		 MAX-ACCESS     read-write
		 STATUS    current
		 DESCRIPTION
		 "vlan global configuration table index" 
	 ::= { flAcm110MvGlobalVlanConfigEntry  1 }

     flAcm110MvVlan8021q			OBJECT-TYPE
		 SYNTAX    INTEGER {
								off			(1),
								on			(2)
						   }
		 MAX-ACCESS     read-write
		 STATUS    current
		 DESCRIPTION
		 "Enable or disable 802.1q VLAN filtering" 
	 ::= { flAcm110MvGlobalVlanConfigEntry  2 }

     flAcm110MvVlanNullVidReplace			OBJECT-TYPE
		 SYNTAX    INTEGER {
								off			(1),
								on			(2)
						   }
		 MAX-ACCESS     read-write
		 STATUS    current
		 DESCRIPTION
		 "Port's null VID replacing mode" 
	 ::= { flAcm110MvGlobalVlanConfigEntry  3 }

     flAcm110MvCreateDefaultVlans			OBJECT-TYPE
		 SYNTAX    INTEGER {
								normal			(1),
								create			(2)
						   }
		 MAX-ACCESS     read-write
		 STATUS    current
		 DESCRIPTION
		 "Create the default VLANs" 
	 ::= { flAcm110MvGlobalVlanConfigEntry  4 }

     flAcm110MvDeleteAllVlans			OBJECT-TYPE
		 SYNTAX    INTEGER {
								normal			(1),
								delete			(2)
						   }
		 MAX-ACCESS     read-write
		 STATUS    current
		 DESCRIPTION
		 "Delete all active VLANs (null the VID)" 
	 ::= { flAcm110MvGlobalVlanConfigEntry  5 }


-- ************************************************************
-- ************************************************************
-- VLANs table
-- ************************************************************
-- ************************************************************

	 flAcm110MvVlanTable               OBJECT-TYPE
         SYNTAX  SEQUENCE OF FlAcm110MvVlanEntry
         MAX-ACCESS   not-accessible
         STATUS  current
         DESCRIPTION
         "This table provides VLANs defined in the device"
     ::= { flAcm110MvVlan 10 }

     flAcm110MvVlanEntry				OBJECT-TYPE
         SYNTAX  FlAcm110MvVlanEntry
         MAX-ACCESS   not-accessible
         STATUS  current
         DESCRIPTION
         "The entries of the table"
         INDEX { flMsChassisMvIndex,
				 flMsChassisModuleMvIndex,
				 flAcm110MvVlanFid }
     ::= { flAcm110MvVlanTable 1 }

		FlAcm110MvVlanEntry ::= SEQUENCE
		{
			 flAcm110MvVlanFid				INTEGER,
			 flAcm110MvVlanVid				INTEGER,
			 flAcm110MvVlanName				DisplayString,
			 flAcm110MvVlanPort1Member		INTEGER,
			 flAcm110MvVlanPort2Member		INTEGER,
			 flAcm110MvVlanPort3Member		INTEGER,
			 flAcm110MvVlanPort4Member		INTEGER, --only in acm110-14
 			 flAcm110MvVlanPort5Member		INTEGER, --only in acm110-14
 			 flAcm110MvVlanTableStatus		EntryStatus
		}

     flAcm110MvVlanFid				OBJECT-TYPE
		 SYNTAX    INTEGER (0..15)
		 MAX-ACCESS     read-only
		 STATUS    current
		 DESCRIPTION
		 "Table index - VLAN Filter ID" 
	 ::= { flAcm110MvVlanEntry 1 }

     flAcm110MvVlanVid				OBJECT-TYPE
		 SYNTAX    INTEGER	(0..4095)
		 MAX-ACCESS     read-write
		 STATUS    current
		 DESCRIPTION
		 "VLAN ID" 
	 ::= { flAcm110MvVlanEntry 2 }

     flAcm110MvVlanName				OBJECT-TYPE
		 SYNTAX    DisplayString
		 MAX-ACCESS     read-write
		 STATUS    current
		 DESCRIPTION
		 "VLAN name - up to 15 characters" 
	 ::= { flAcm110MvVlanEntry 3 }

     flAcm110MvVlanPort1Member			OBJECT-TYPE
		 SYNTAX    INTEGER {
								none		(1),
								native		(2),
								tagged		(3)
						   }
		 MAX-ACCESS     read-write
		 STATUS    current
		 DESCRIPTION
		 "FO Port (1) membership type in VLAN" 
	 ::= { flAcm110MvVlanEntry 4 }

     flAcm110MvVlanPort2Member			OBJECT-TYPE
		 SYNTAX    INTEGER {
								none		(1),
								native		(2),
								tagged		(3)
						   }
		 MAX-ACCESS     read-write
		 STATUS    current
		 DESCRIPTION
		 "FO Port (2) membership type in VLAN" 
	 ::= { flAcm110MvVlanEntry 5 }

     flAcm110MvVlanPort3Member			OBJECT-TYPE
		 SYNTAX    INTEGER {
								none		(1),
								native		(2),
								tagged		(3)
						   }
		 MAX-ACCESS     read-write
		 STATUS    current
		 DESCRIPTION
		 "FO Port (3) membership type in VLAN" 
	 ::= { flAcm110MvVlanEntry 6 }

     flAcm110MvVlanPort4Member			OBJECT-TYPE  --only in acm110-14
		 SYNTAX    INTEGER {
								none		(1),
								native		(2),
								tagged		(3)
						   }
		 MAX-ACCESS     read-write
		 STATUS    current
		 DESCRIPTION
		 "FO Port (4) membership type in VLAN" 
	 ::= { flAcm110MvVlanEntry 7 }

     flAcm110MvVlanPort5Member			OBJECT-TYPE  --only in acm110-14
		 SYNTAX    INTEGER {
								none		(1),
								native		(2),
								tagged		(3)
						   }
		 MAX-ACCESS     read-write
		 STATUS    current
		 DESCRIPTION
		 "TP Port (5) membership type in VLAN" 
	 ::= { flAcm110MvVlanEntry 8 }

	 flAcm110MvVlanTableStatus		 OBJECT-TYPE
		 SYNTAX EntryStatus  
		 MAX-ACCESS  read-write
		 STATUS current
         DESCRIPTION
           "The status of this table entry.  (Refer to the RFC 1757 definition
              of 'EntryStatus.)"
    ::= { flAcm110MvVlanEntry 9 }


-- ************************************************************
-- Port VLAN configuration table
-- ************************************************************
	 flAcm110MvPortVlanConfigTable               OBJECT-TYPE
         SYNTAX  SEQUENCE OF FlAcm110MvPortVlanConfigEntry
         MAX-ACCESS   not-accessible
         STATUS  current
         DESCRIPTION
         "This table provides the ports' VLAN related configuration"
     ::= { flAcm110MvVlan 20 }

     flAcm110MvPortVlanConfigEntry				OBJECT-TYPE
         SYNTAX  FlAcm110MvPortVlanConfigEntry
         MAX-ACCESS   not-accessible
         STATUS  current
         DESCRIPTION
         "The entries of the table"
         INDEX { flMsChassisMvIndex,
				 flMsChassisModuleMvIndex,
				 flAcm110MvPortNumber }
     ::= { flAcm110MvPortVlanConfigTable 1 }

		FlAcm110MvPortVlanConfigEntry ::= SEQUENCE
		{
			 flAcm110MvPortIngressFilter		INTEGER,
			 flAcm110MvPortTagInsertion			INTEGER,
			 flAcm110MvPortTagRemoval			INTEGER,
			 flAcm110MvPortVid					INTEGER,
			 flAcm110MvPortDiscardNonPvid		INTEGER
		}

	 flAcm110MvPortIngressFilter				OBJECT-TYPE
		 SYNTAX    INTEGER {
								off		(1),
								on		(2)
						   }
		 MAX-ACCESS     read-write
		 STATUS    current
		 DESCRIPTION
		 "Port's ingress VLAN filtering mode" 
	 ::= { flAcm110MvPortVlanConfigEntry 1 }

     flAcm110MvPortTagInsertion				OBJECT-TYPE
		 SYNTAX    INTEGER {
								off		(1),
								on		(2)
						   }
		 MAX-ACCESS     read-write
		 STATUS    current
		 DESCRIPTION
		 "Port's VLAN tag insertion mode" 
	 ::= { flAcm110MvPortVlanConfigEntry 2 }

     flAcm110MvPortTagRemoval				OBJECT-TYPE
		 SYNTAX    INTEGER {
								off		(1),
								on		(2)
						   }
		 MAX-ACCESS     read-write
		 STATUS    current
		 DESCRIPTION
		 "Port's VLAN tag removal mode" 
	 ::= { flAcm110MvPortVlanConfigEntry 3 }

     flAcm110MvPortVid				OBJECT-TYPE
		 SYNTAX    INTEGER (0..4095)
		 MAX-ACCESS     read-write
		 STATUS    current
		 DESCRIPTION
		 "Default port VID (used in tag insertion)" 
	 ::= { flAcm110MvPortVlanConfigEntry 4 }

     flAcm110MvPortDiscardNonPvid				OBJECT-TYPE
		 SYNTAX    INTEGER {
								off		(1),
								on		(2)
						   }
		 MAX-ACCESS     read-write
		 STATUS    current
		 DESCRIPTION
		 "Port's discard non port VID tagged packets mode" 
	 ::= { flAcm110MvPortVlanConfigEntry 5 }



-- ************************************************************
-- ************************************************************
-- ************************************************************
-- Device's priority (QoS) configuration group
-- ************************************************************
-- ************************************************************
-- ************************************************************
	 flAcm110MvPriorityConfigTable               OBJECT-TYPE
         SYNTAX  SEQUENCE OF FlAcm110MvPriorityConfigEntry
         MAX-ACCESS   not-accessible
         STATUS  current
         DESCRIPTION
         "This table provides the ports' VLAN related configuration"
     ::= { flAcm110MvPriority  1 }

     flAcm110MvPriorityConfigEntry				OBJECT-TYPE
         SYNTAX  FlAcm110MvPriorityConfigEntry
         MAX-ACCESS   not-accessible
         STATUS  current
         DESCRIPTION
         "The entries of the table"
         INDEX { flMsChassisMvIndex,
				 flMsChassisModuleMvIndex,
				 flAcm110MvPriorityIndex }
     ::= { flAcm110MvPriorityConfigTable 1 }

		FlAcm110MvPriorityConfigEntry ::= SEQUENCE
		{
			flAcm110MvPriorityIndex				INTEGER,
			flAcm110Mv8021pBase					INTEGER,
		    flAcm110MvPriorityRatio		        INTEGER
		}

     flAcm110MvPriorityIndex			OBJECT-TYPE
		 SYNTAX    INTEGER (1..3)
		 MAX-ACCESS     read-write
		 STATUS    current
		 DESCRIPTION
		 "priority table index" 
	 ::= { flAcm110MvPriorityConfigEntry  1 }

     flAcm110Mv8021pBase			OBJECT-TYPE
		 SYNTAX    INTEGER (0..7)
		 MAX-ACCESS     read-write
		 STATUS    current
		 DESCRIPTION
		 "802.1p base priority - values below are low priority" 
	 ::= { flAcm110MvPriorityConfigEntry  2 }

     flAcm110MvPriorityRatio			OBJECT-TYPE
		 SYNTAX    INTEGER {
								alwaysHi	(1),
								ratio10-1	(2),
								ratio5-1	(3),
								ratio2-1	(4)
						   }
		 MAX-ACCESS     read-write
		 STATUS    current
		 DESCRIPTION
		 "Priority packet transmission policy - ratio is hi:lo" 
	 ::= { flAcm110MvPriorityConfigEntry 3 }

-- ************************************************************
-- DSCP table
-- ************************************************************

	 flAcm110MvDscpTable               OBJECT-TYPE
         SYNTAX  SEQUENCE OF FlAcm110MvDscpEntry
         MAX-ACCESS   not-accessible
         STATUS  current
         DESCRIPTION
         "This table provides the DSCP priority settings"
     ::= { flAcm110MvPriority 10 }

     flAcm110MvDscpEntry				OBJECT-TYPE
         SYNTAX  FlAcm110MvDscpEntry
         MAX-ACCESS   not-accessible
         STATUS  current
         DESCRIPTION
         "The entries of the table"
         INDEX { flMsChassisMvIndex,
				 flMsChassisModuleMvIndex,
				 flAcm110MvDscpCode }
     ::= { flAcm110MvDscpTable 1 }

		FlAcm110MvDscpEntry ::= SEQUENCE
		{
			 flAcm110MvDscpCode				INTEGER,
			 flAcm110MvDscpCodePriority		INTEGER
		}

     flAcm110MvDscpCode				OBJECT-TYPE
		 SYNTAX    INTEGER	(1..64)
		 MAX-ACCESS     read-only
		 STATUS    current
		 DESCRIPTION
		 "Table index - DSCP code" 
	 ::= { flAcm110MvDscpEntry 1 }

     flAcm110MvDscpCodePriority				OBJECT-TYPE
		 SYNTAX    INTEGER	{
								low		(1),
								high	(2)
							}
		 MAX-ACCESS     read-write
		 STATUS    current
		 DESCRIPTION
		 "DSCP code priority" 
	 ::= { flAcm110MvDscpEntry 2 }

-- ************************************************************
-- Port priority configuration table
-- ************************************************************

	 flAcm110MvPortPriorityTable               OBJECT-TYPE
         SYNTAX  SEQUENCE OF FlAcm110MvPortPriorityEntry
         MAX-ACCESS   not-accessible
         STATUS  current
         DESCRIPTION
         "This table provides the ports' priority related configuration"
     ::= { flAcm110MvPriority 20 }

     flAcm110MvPortPriorityEntry				OBJECT-TYPE
         SYNTAX  FlAcm110MvPortPriorityEntry
         MAX-ACCESS   not-accessible
         STATUS  current
         DESCRIPTION
         "The entries of the table"
         INDEX { flMsChassisMvIndex,
				 flMsChassisModuleMvIndex,
				 flAcm110MvPortNumber }
     ::= { flAcm110MvPortPriorityTable 1 }

		FlAcm110MvPortPriorityEntry ::= SEQUENCE
		{
			 flAcm110MvPortPriority					INTEGER,
			 flAcm110MvPort8021pClassific			INTEGER,
			 flAcm110MvPortDiffServClassific		INTEGER,
			 flAcm110MvPortUserPriority				INTEGER
		}


     flAcm110MvPortPriority				OBJECT-TYPE
		 SYNTAX    INTEGER {
								low		(1),
								high	(2)
						   }
		 MAX-ACCESS     read-write
		 STATUS    current
		 DESCRIPTION
		 "Port priority mode" 
	 ::= { flAcm110MvPortPriorityEntry 1 }

     flAcm110MvPort8021pClassific				OBJECT-TYPE
		 SYNTAX    INTEGER {
								off		(1),
								on		(2)
						   }
		 MAX-ACCESS     read-write
		 STATUS    current
		 DESCRIPTION
		 "Port's 802.1p packet classification mode" 
	 ::= { flAcm110MvPortPriorityEntry 2 }

     flAcm110MvPortDiffServClassific				OBJECT-TYPE
		 SYNTAX    INTEGER {
								off		(1),
								on		(2)
						   }
		 MAX-ACCESS     read-write
		 STATUS    current
		 DESCRIPTION
		 "Port's DiffServ packet classification mode" 
	 ::= { flAcm110MvPortPriorityEntry 3 }

     flAcm110MvPortUserPriority				OBJECT-TYPE
		 SYNTAX    INTEGER (0..7)
		 MAX-ACCESS     read-write
		 STATUS    current
		 DESCRIPTION
		 "Port's user priority" 
	 ::= { flAcm110MvPortPriorityEntry 4 }



-- ************************************************************
-- ************************************************************
-- ************************************************************
-- Device's Global MAC address tables
-- ************************************************************
-- ************************************************************
-- ************************************************************
	 flAcm110MvGlobalMacTable               OBJECT-TYPE
         SYNTAX  SEQUENCE OF FlAcm110MvGlobalMacEntry
         MAX-ACCESS   not-accessible
         STATUS  current
         DESCRIPTION
         "This table provides the device's dynamic MAC address table.
		  this table is read only"
     ::= { flAcm110MvMac 1 }

     flAcm110MvGlobalMacEntry				OBJECT-TYPE
         SYNTAX  FlAcm110MvGlobalMacEntry
         MAX-ACCESS   not-accessible
         STATUS  current
         DESCRIPTION
         "The entries of the table"
         INDEX { flMsChassisMvIndex,
				 flMsChassisModuleMvIndex,
		         flAcm110MvGlobalMacIndex }
     ::= { flAcm110MvGlobalMacTable 1 }

		FlAcm110MvGlobalMacEntry ::= SEQUENCE
		{
			 flAcm110MvGlobalMacIndex				INTEGER,
			 flAcm110MvClearDynamicMacTable			INTEGER,
			 flAcm110MvClearStaticMacTable			INTEGER
		}

     flAcm110MvGlobalMacIndex				OBJECT-TYPE
		 SYNTAX    INTEGER (1..3)
		 MAX-ACCESS     read-only
		 STATUS    current
		 DESCRIPTION
		 "Table index - entry number" 
	 ::= { flAcm110MvGlobalMacEntry 1 }

     flAcm110MvClearDynamicMacTable			OBJECT-TYPE
		 SYNTAX    INTEGER {
								normal			(1),
								clear			(2)
						   }
		 MAX-ACCESS     read-write
		 STATUS    current
		 DESCRIPTION
		 "Clear the device's dynamic MAC address table" 
	 ::= { flAcm110MvGlobalMacEntry 2 }

     flAcm110MvClearStaticMacTable			OBJECT-TYPE
		 SYNTAX    INTEGER {
								normal			(1),
								clear			(2)
						   }
		 MAX-ACCESS     read-write
		 STATUS    current
		 DESCRIPTION
		 "Clear the device's static MAC address table" 
	 ::= { flAcm110MvGlobalMacEntry 3 }


-- ************************************************************
-- Dynamic MAC table
-- ************************************************************

	 flAcm110MvDynamicMacTable               OBJECT-TYPE
         SYNTAX  SEQUENCE OF FlAcm110MvDynamicMacEntry
         MAX-ACCESS   not-accessible
         STATUS  current
         DESCRIPTION
         "This table provides the device's dynamic MAC address table.
		  this table is read only"
     ::= { flAcm110MvMac 10 }

     flAcm110MvDynamicMacEntry				OBJECT-TYPE
         SYNTAX  FlAcm110MvDynamicMacEntry
         MAX-ACCESS   not-accessible
         STATUS  current
         DESCRIPTION
         "The entries of the table"
         INDEX { flMsChassisMvIndex,
				 flMsChassisModuleMvIndex,
		         flAcm110MvDynamicEntryNumber }
     ::= { flAcm110MvDynamicMacTable 1 }

		FlAcm110MvDynamicMacEntry ::= SEQUENCE
		{
			 flAcm110MvDynamicEntryNumber			INTEGER,
			 flAcm110MvDynamicMacAddress			DisplayString,
			 flAcm110MvDynamicSrcPort				INTEGER,
			 flAcm110MvDynamicFid					INTEGER
		}

     flAcm110MvDynamicEntryNumber				OBJECT-TYPE
		 SYNTAX    INTEGER (1..1000)
		 MAX-ACCESS     read-only
		 STATUS    current
		 DESCRIPTION
		 "Table index - entry number" 
	 ::= { flAcm110MvDynamicMacEntry 1 }

     flAcm110MvDynamicMacAddress				OBJECT-TYPE
		 SYNTAX    DisplayString
		 MAX-ACCESS     read-only
		 STATUS    current
		 DESCRIPTION
		 "MAC address" 
	 ::= { flAcm110MvDynamicMacEntry 2 }

     flAcm110MvDynamicSrcPort					OBJECT-TYPE
		 SYNTAX    INTEGER
		 MAX-ACCESS     read-only
		 STATUS    current
		 DESCRIPTION
		 "Address's source port" 
	 ::= { flAcm110MvDynamicMacEntry 3 }

	 --flAcm110MvDynamicUseFid					OBJECT-TYPE  (changed 21-12-04, Anat)
	 flAcm110MvDynamicFid					OBJECT-TYPE
		 SYNTAX    INTEGER	(0..15)
		 MAX-ACCESS     read-only
		 STATUS    current
		 DESCRIPTION
		 "VLAN filter ID" 
	 ::= { flAcm110MvDynamicMacEntry 4 }

-- ************************************************************
-- Static MAC table
-- ************************************************************

	 flAcm110MvStaticMacTable               OBJECT-TYPE
         SYNTAX  SEQUENCE OF FlAcm110MvStaticMacEntry
         MAX-ACCESS   not-accessible
         STATUS  current
         DESCRIPTION
         "This table provides the device's static MAC address table.
		  this table is read only"
     ::= { flAcm110MvMac 20 }

     flAcm110MvStaticMacEntry				OBJECT-TYPE
         SYNTAX  FlAcm110MvStaticMacEntry
         MAX-ACCESS   not-accessible
         STATUS  current
         DESCRIPTION
         "The entries of the table"
         INDEX { flMsChassisMvIndex,
				 flMsChassisModuleMvIndex,
		         flAcm110MvStaticEntryNumber }
     ::= { flAcm110MvStaticMacTable 1 }

		FlAcm110MvStaticMacEntry ::= SEQUENCE
		{
			 flAcm110MvStaticEntryNumber	INTEGER,
			 flAcm110MvStaticMacAddress		DisplayString,
			 flAcm110MvFwdPort1				INTEGER,
			 flAcm110MvFwdPort2				INTEGER,
			 flAcm110MvFwdPort3				INTEGER,
			 flAcm110MvFwdPort4				INTEGER, --only in acm110-14
			 flAcm110MvFwdPort5				INTEGER, --only in acm110-14
			 flAcm110MvFid					INTEGER,
			 flAcm110MvStaticUseFid			INTEGER,
			 flAcm110MvStaticTableStatus	EntryStatus
		}

     flAcm110MvStaticEntryNumber				OBJECT-TYPE
		 SYNTAX    INTEGER (0..7)
		 MAX-ACCESS     read-only
		 STATUS    current
		 DESCRIPTION
		 "Table index - entry number" 
	 ::= { flAcm110MvStaticMacEntry 1 }

     flAcm110MvStaticMacAddress				OBJECT-TYPE
		 SYNTAX    DisplayString
		 MAX-ACCESS     read-write
		 STATUS    current
		 DESCRIPTION
		 "MAC address" 
	 ::= { flAcm110MvStaticMacEntry 2 }

     flAcm110MvFwdPort1						OBJECT-TYPE
		 SYNTAX    INTEGER	{
								no	(1),
								yes	(2)
							}
		 MAX-ACCESS     read-write
		 STATUS    current
		 DESCRIPTION
		 "Forward packets with the MAC address to port 1" 
	 ::= { flAcm110MvStaticMacEntry 3 }

     flAcm110MvFwdPort2						OBJECT-TYPE
		 SYNTAX    INTEGER	{
								no	(1),
								yes	(2)
							}
		 MAX-ACCESS     read-write
		 STATUS    current
		 DESCRIPTION
		 "Forward packets with the MAC address to port 2" 
	 ::= { flAcm110MvStaticMacEntry 4 }

     flAcm110MvFwdPort3						OBJECT-TYPE
		 SYNTAX    INTEGER	{
								no	(1),
								yes	(2)
							}
		 MAX-ACCESS     read-write
		 STATUS    current
		 DESCRIPTION
		 "Forward packets with the MAC address to port 3" 
	 ::= { flAcm110MvStaticMacEntry 5 }

	-- only in acm110-14
     flAcm110MvFwdPort4						OBJECT-TYPE 
		 SYNTAX    INTEGER	{
								no	(1),
								yes	(2)
							}
		 MAX-ACCESS     read-write
		 STATUS    current
		 DESCRIPTION
		 "Forward packets with the MAC address to port 4" 
	 ::= { flAcm110MvStaticMacEntry 6 }

	-- only in acm110-14
     flAcm110MvFwdPort5						OBJECT-TYPE
		 SYNTAX    INTEGER	{
								no	(1),
								yes	(2)
							}
		 MAX-ACCESS     read-write
		 STATUS    current
		 DESCRIPTION
		 "Forward packets with the MAC address to port 5" 
	 ::= { flAcm110MvStaticMacEntry 7 }

	 flAcm110MvFid								OBJECT-TYPE
		 SYNTAX    INTEGER	(0..15)
		 MAX-ACCESS     read-write
		 STATUS    current
		 DESCRIPTION
		 "The VLAN filter to be used (by FID)" 
	 ::= { flAcm110MvStaticMacEntry 8 }

	 flAcm110MvStaticUseFid					OBJECT-TYPE
		 SYNTAX    INTEGER	{
								no	(1),
								yes	(2)
							}
		 MAX-ACCESS     read-write
		 STATUS    current
		 DESCRIPTION
		 "Uses a VLAN filter (by FID)" 
	 ::= { flAcm110MvStaticMacEntry 9 }

	 flAcm110MvStaticTableStatus		 OBJECT-TYPE
		 SYNTAX EntryStatus  
		 MAX-ACCESS  read-write
		 STATUS current
         DESCRIPTION
           "The status of this table entry.  (Refer to the RFC 1757 definition
              of 'EntryStatus.)"
    ::= { flAcm110MvStaticMacEntry 10 }


-- insert UMA here 


-- ************************************************************
-- ************************************************************
-- ************************************************************
-- Device's traffic statistics group
-- ************************************************************
-- ************************************************************
-- ************************************************************

-- ************************************************************
-- Rx Errors table
-- ************************************************************
	 flAcm110MvRxErrorPacketsTable               OBJECT-TYPE
         SYNTAX  SEQUENCE OF FlAcm110MvRxErrorPacketsEntry
         MAX-ACCESS   not-accessible
         STATUS  current
         DESCRIPTION
         "This table provides the error packet statistics for all ports.
		  Table is read only"
     ::= { flAcm110MvStatistics 10 }

     flAcm110MvRxErrorPacketsEntry				OBJECT-TYPE
         SYNTAX  FlAcm110MvRxErrorPacketsEntry
         MAX-ACCESS   not-accessible
         STATUS  current
         DESCRIPTION
         "The entries of the table"
         INDEX { flMsChassisMvIndex,
				 flMsChassisModuleMvIndex,
				 flAcm110MvPortNumber }
     ::= { flAcm110MvRxErrorPacketsTable 1 }

		FlAcm110MvRxErrorPacketsEntry ::= SEQUENCE
		{
			 flAcm110MvRxUndersizePckt				Counter,
			 flAcm110MvRxFragmentPckt				Counter,
			 flAcm110MvRxOversizePckt				Counter,
			 flAcm110MvRxCrcErrorPckt				Counter,
			 flAcm110MvRxAlignmentErrorPckt			Counter,
			 flAcm110MvRxRefreshCounters			INTEGER,
			 flAcm110MvRxClearCounters				INTEGER
		}


     flAcm110MvRxUndersizePckt				OBJECT-TYPE
		 SYNTAX    Counter
		 MAX-ACCESS     read-only
		 STATUS    current
		 DESCRIPTION
		 "Number of undersized packets that arrived on the port" 
	 ::= { flAcm110MvRxErrorPacketsEntry 1 }

     flAcm110MvRxFragmentPckt				OBJECT-TYPE
		 SYNTAX    Counter
		 MAX-ACCESS     read-only
		 STATUS    current
		 DESCRIPTION
		 "Number of fragmented packets that arrived on the port" 
	 ::= { flAcm110MvRxErrorPacketsEntry 2 }

     flAcm110MvRxOversizePckt				OBJECT-TYPE
		 SYNTAX    Counter
		 MAX-ACCESS     read-only
		 STATUS    current
		 DESCRIPTION
		 "Number of oversized packets that arrived on the port" 
	 ::= { flAcm110MvRxErrorPacketsEntry 3 }

     flAcm110MvRxCrcErrorPckt				OBJECT-TYPE
		 SYNTAX    Counter
		 MAX-ACCESS     read-only
		 STATUS    current
		 DESCRIPTION
		 "Number of CRC errored packets that arrived on the port" 
	 ::= { flAcm110MvRxErrorPacketsEntry 4 }

     flAcm110MvRxAlignmentErrorPckt				OBJECT-TYPE
		 SYNTAX    Counter
		 MAX-ACCESS     read-only
		 STATUS    current
		 DESCRIPTION
		 "Number of alignment error packets that arrived on the port" 
	 ::= { flAcm110MvRxErrorPacketsEntry 5 }

     flAcm110MvRxRefreshCounters				OBJECT-TYPE
		 SYNTAX    INTEGER	{
								normal		(1),
								refresh		(2)
							}
		 MAX-ACCESS     read-write
		 STATUS    current
		 DESCRIPTION
		 "Refresh the port's counters for this table" 
	 ::= { flAcm110MvRxErrorPacketsEntry 6 }

     flAcm110MvRxClearCounters				OBJECT-TYPE
		 SYNTAX    INTEGER	{
								normal		(1),
								clear		(2)
							}
		 MAX-ACCESS     read-write
		 STATUS    current
		 DESCRIPTION
		 "Clear the port's counters for this table" 
	 ::= { flAcm110MvRxErrorPacketsEntry 7 }


-- ************************************************************
-- Rx good packets table
-- ************************************************************
	 flAcm110MvRxGoodPacketsTable               OBJECT-TYPE
         SYNTAX  SEQUENCE OF FlAcm110MvRxGoodPacketsEntry
         MAX-ACCESS   not-accessible
         STATUS  current
         DESCRIPTION
         "This table provides the received good packet statistics for all ports.
		  Table is read only"
     ::= { flAcm110MvStatistics 20 }

     flAcm110MvRxGoodPacketsEntry				OBJECT-TYPE
         SYNTAX  FlAcm110MvRxGoodPacketsEntry
         MAX-ACCESS   not-accessible
         STATUS  current
         DESCRIPTION
         "The entries of the table"
         INDEX { flMsChassisMvIndex,
				 flMsChassisModuleMvIndex,
				 flAcm110MvPortNumber }
     ::= { flAcm110MvRxGoodPacketsTable 1 }

		FlAcm110MvRxGoodPacketsEntry ::= SEQUENCE
		{
			 flAcm110MvRxUnicastPackets				Counter,
			 flAcm110MvRxMulticastPackets			Counter,
			 flAcm110MvRxBroadcastPackets			Counter,
			 flAcm110MvRxMacControlPackets			Counter,
			 flAcm110MvRxPausePackets				Counter,
			 flAcm110MvRxGoodRefreshCounters		INTEGER,
			 flAcm110MvRxGoodClearCounters			INTEGER
		}


     flAcm110MvRxUnicastPackets				OBJECT-TYPE
		 SYNTAX    Counter
		 MAX-ACCESS     read-only
		 STATUS    current
		 DESCRIPTION
		 "Number of good unicast packets that arrived on the port" 
	 ::= { flAcm110MvRxGoodPacketsEntry 1 }

     flAcm110MvRxMulticastPackets				OBJECT-TYPE
		 SYNTAX    Counter
		 MAX-ACCESS     read-only
		 STATUS    current
		 DESCRIPTION
		 "Number of good multicast packets that arrived on the port" 
	 ::= { flAcm110MvRxGoodPacketsEntry 2 }

     flAcm110MvRxBroadcastPackets				OBJECT-TYPE
		 SYNTAX    Counter
		 MAX-ACCESS     read-only
		 STATUS    current
		 DESCRIPTION
		 "Number of good broadcast packets that arrived on the port" 
	 ::= { flAcm110MvRxGoodPacketsEntry 3 }

     flAcm110MvRxMacControlPackets				OBJECT-TYPE
		 SYNTAX    Counter
		 MAX-ACCESS     read-only
		 STATUS    current
		 DESCRIPTION
		 "Number of good MAC control packets that arrived on the port" 
	 ::= { flAcm110MvRxGoodPacketsEntry 4 }

     flAcm110MvRxPausePackets				OBJECT-TYPE
		 SYNTAX    Counter
		 MAX-ACCESS     read-only
		 STATUS    current
		 DESCRIPTION
		 "Number of good Pause packets that arrived on the port" 
	 ::= { flAcm110MvRxGoodPacketsEntry 5 }

     flAcm110MvRxGoodRefreshCounters				OBJECT-TYPE
		 SYNTAX    INTEGER	{
								normal		(1),
								refresh		(2)
							}
		 MAX-ACCESS     read-write
		 STATUS    current
		 DESCRIPTION
		 "Refresh the port's counters for this table" 
	 ::= { flAcm110MvRxGoodPacketsEntry 6 }

     flAcm110MvRxGoodClearCounters				OBJECT-TYPE
		 SYNTAX    INTEGER	{
								normal		(1),
								clear		(2)
							}
		 MAX-ACCESS     read-write
		 STATUS    current
		 DESCRIPTION
		 "Clear the port's counters for this table" 
	 ::= { flAcm110MvRxGoodPacketsEntry 7 }


-- ************************************************************
-- Tx good packets table
-- ************************************************************
	 flAcm110MvTxGoodPacketsTable               OBJECT-TYPE
         SYNTAX  SEQUENCE OF FlAcm110MvTxGoodPacketsEntry
         MAX-ACCESS   not-accessible
         STATUS  current
         DESCRIPTION
         "This table provides the transmitted good packet statistics for all ports.
		  Table is read only"
     ::= { flAcm110MvStatistics 30 }

     flAcm110MvTxGoodPacketsEntry				OBJECT-TYPE
         SYNTAX  FlAcm110MvTxGoodPacketsEntry
         MAX-ACCESS   not-accessible
         STATUS  current
         DESCRIPTION
         "The entries of the table"
         INDEX { flMsChassisMvIndex,
				 flMsChassisModuleMvIndex,
				 flAcm110MvPortNumber }
     ::= { flAcm110MvTxGoodPacketsTable 1 }

		FlAcm110MvTxGoodPacketsEntry ::= SEQUENCE
		{
			 flAcm110MvTxUnicastPackets				Counter,
			 flAcm110MvTxMulticastPackets			Counter,
			 flAcm110MvTxBroadcastPackets			Counter,
			 flAcm110MvTxPausePackets				Counter,
			 flAcm110MvTxGoodRefreshCounters		INTEGER,
			 flAcm110MvTxGoodClearCounters			INTEGER
		}


     flAcm110MvTxUnicastPackets					OBJECT-TYPE
		 SYNTAX    Counter
		 MAX-ACCESS     read-only
		 STATUS    current
		 DESCRIPTION
		 "Number of good unicast packets that were transmitted on the port" 
	 ::= { flAcm110MvTxGoodPacketsEntry 1 }

     flAcm110MvTxMulticastPackets					OBJECT-TYPE
		 SYNTAX    Counter
		 MAX-ACCESS     read-only
		 STATUS    current
		 DESCRIPTION
		 "Number of good multicast packets that were transmitted on the port" 
	 ::= { flAcm110MvTxGoodPacketsEntry 2 }

     flAcm110MvTxBroadcastPackets					OBJECT-TYPE
		 SYNTAX    Counter
		 MAX-ACCESS     read-only
		 STATUS    current
		 DESCRIPTION
		 "Number of good broadcast packets that were transmitted on the port" 
	 ::= { flAcm110MvTxGoodPacketsEntry 3 }

     flAcm110MvTxPausePackets						OBJECT-TYPE
		 SYNTAX    Counter
		 MAX-ACCESS     read-only
		 STATUS    current
		 DESCRIPTION
		 "Number of good Pause packets that were transmitted on the port" 
	 ::= { flAcm110MvTxGoodPacketsEntry 4 }

     flAcm110MvTxGoodRefreshCounters				OBJECT-TYPE
		 SYNTAX    INTEGER	{
								normal		(1),
								refresh		(2)
							}
		 MAX-ACCESS     read-write
		 STATUS    current
		 DESCRIPTION
		 "Refresh the port's counters for this table" 
	 ::= { flAcm110MvTxGoodPacketsEntry 5 }

     flAcm110MvTxGoodClearCounters					OBJECT-TYPE
		 SYNTAX    INTEGER	{
								normal		(1),
								clear		(2)
							}
		 MAX-ACCESS     read-write
		 STATUS    current
		 DESCRIPTION
		 "Clear the port's counters for this table" 
	 ::= { flAcm110MvTxGoodPacketsEntry 6 }


-- ************************************************************
-- Rx total packets table
-- ************************************************************
	 flAcm110MvRxTotalPacketsTable               OBJECT-TYPE
         SYNTAX  SEQUENCE OF FlAcm110MvRxTotalPacketsEntry
         MAX-ACCESS   not-accessible
         STATUS  current
         DESCRIPTION
         "This table provides the total received packet statistics for all ports.
		  Table is read only"
     ::= { flAcm110MvStatistics 40 }

     flAcm110MvRxTotalPacketsEntry				OBJECT-TYPE
         SYNTAX  FlAcm110MvRxTotalPacketsEntry
         MAX-ACCESS   not-accessible
         STATUS  current
         DESCRIPTION
         "The entries of the table"
         INDEX { flMsChassisMvIndex,
				 flMsChassisModuleMvIndex,
				 flAcm110MvPortNumber }
     ::= { flAcm110MvRxTotalPacketsTable 1 }

		FlAcm110MvRxTotalPacketsEntry ::= SEQUENCE
		{
			 flAcm110MvRxDroppedPackets				Counter,
			 flAcm110MvRx64BytesPackets				Counter,
			 flAcm110MvRx65-127BytesPackets			Counter,
			 flAcm110MvRx128-255BytesPackets		Counter,
			 flAcm110MvRx256-511BytesPackets		Counter,
			 flAcm110MvRx512-1023BytesPackets		Counter,
			 flAcm110MvRx1024-MaxBytesPackets		Counter,
			 flAcm110MvRxTotalRefreshCounters		INTEGER,
			 flAcm110MvRxTotalClearCounters			INTEGER
		}


     flAcm110MvRxDroppedPackets				OBJECT-TYPE
		 SYNTAX    Counter
		 MAX-ACCESS     read-only
		 STATUS    current
		 DESCRIPTION
		 "Number of dropped received packets" 
	 ::= { flAcm110MvRxTotalPacketsEntry 1 }

     flAcm110MvRx64BytesPackets				OBJECT-TYPE
		 SYNTAX    Counter
		 MAX-ACCESS     read-only
		 STATUS    current
		 DESCRIPTION
		 "Number of packets received in size of 64 bytes" 
	 ::= { flAcm110MvRxTotalPacketsEntry 2 }

     flAcm110MvRx65-127BytesPackets				OBJECT-TYPE
		 SYNTAX    Counter
		 MAX-ACCESS     read-only
		 STATUS    current
		 DESCRIPTION
		 "Number of packets received in size range of 65-127 bytes" 
	 ::= { flAcm110MvRxTotalPacketsEntry 3 }

     flAcm110MvRx128-255BytesPackets				OBJECT-TYPE
		 SYNTAX    Counter
		 MAX-ACCESS     read-only
		 STATUS    current
		 DESCRIPTION
		 "Number of packets received in size range of 128-255 bytes" 
	 ::= { flAcm110MvRxTotalPacketsEntry 4 }

     flAcm110MvRx256-511BytesPackets				OBJECT-TYPE
		 SYNTAX    Counter
		 MAX-ACCESS     read-only
		 STATUS    current
		 DESCRIPTION
		 "Number of packets received in size range of 256-511 bytes" 
	 ::= { flAcm110MvRxTotalPacketsEntry 5 }

     flAcm110MvRx512-1023BytesPackets				OBJECT-TYPE
		 SYNTAX    Counter
		 MAX-ACCESS     read-only
		 STATUS    current
		 DESCRIPTION
		 "Number of packets received in size range of 512-1023 bytes" 
	 ::= { flAcm110MvRxTotalPacketsEntry 6 }

     flAcm110MvRx1024-MaxBytesPackets				OBJECT-TYPE
		 SYNTAX    Counter
		 MAX-ACCESS     read-only
		 STATUS    current
		 DESCRIPTION
		 "Number of packets received in size range of 1024-Max (packet size) bytes" 
	 ::= { flAcm110MvRxTotalPacketsEntry 7 }

     flAcm110MvRxTotalRefreshCounters				OBJECT-TYPE
		 SYNTAX    INTEGER	{
								normal		(1),
								refresh		(2)
							}
		 MAX-ACCESS     read-write
		 STATUS    current
		 DESCRIPTION
		 "Refresh the port's counters for this table" 
	 ::= { flAcm110MvRxTotalPacketsEntry 8 }

     flAcm110MvRxTotalClearCounters				OBJECT-TYPE
		 SYNTAX    INTEGER	{
								normal		(1),
								clear		(2)
							}
		 MAX-ACCESS     read-write
		 STATUS    current
		 DESCRIPTION
		 "Clear the port's counters for this table" 
	 ::= { flAcm110MvRxTotalPacketsEntry 9 }


-- ************************************************************
-- Tx total packets table
-- ************************************************************
	 flAcm110MvTxTotalPacketsTable               OBJECT-TYPE
         SYNTAX  SEQUENCE OF FlAcm110MvTxTotalPacketsEntry
         MAX-ACCESS   not-accessible
         STATUS  current
         DESCRIPTION
         "This table provides the total transmitted packet statistics for all ports.
		  Table is read only"
     ::= { flAcm110MvStatistics 50 }

     flAcm110MvTxTotalPacketsEntry				OBJECT-TYPE
         SYNTAX  FlAcm110MvTxTotalPacketsEntry
         MAX-ACCESS   not-accessible
         STATUS  current
         DESCRIPTION
         "The entries of the table"
         INDEX { flMsChassisMvIndex,
				 flMsChassisModuleMvIndex,
				 flAcm110MvPortNumber }
     ::= { flAcm110MvTxTotalPacketsTable 1 }

		FlAcm110MvTxTotalPacketsEntry ::= SEQUENCE
		{
			 flAcm110MvTxDroppedPackets				Counter,
			 flAcm110MvTxTotalRefreshCounters		INTEGER,
			 flAcm110MvTxTotalClearCounters			INTEGER
		}


     flAcm110MvTxDroppedPackets					OBJECT-TYPE
		 SYNTAX    Counter
		 MAX-ACCESS     read-only
		 STATUS    current
		 DESCRIPTION
		 "Number of dropped transmitted packets" 
	 ::= { flAcm110MvTxTotalPacketsEntry 1 }

     flAcm110MvTxTotalRefreshCounters				OBJECT-TYPE
		 SYNTAX    INTEGER	{
								normal		(1),
								refresh		(2)
							}
		 MAX-ACCESS     read-write
		 STATUS    current
		 DESCRIPTION
		 "Refresh the port's counters for this table" 
	 ::= { flAcm110MvTxTotalPacketsEntry 2 }

     flAcm110MvTxTotalClearCounters				OBJECT-TYPE
		 SYNTAX    INTEGER	{
								normal		(1),
								clear		(2)
							}
		 MAX-ACCESS     read-write
		 STATUS    current
		 DESCRIPTION
		 "Clear the port's counters for this table" 
	 ::= { flAcm110MvTxTotalPacketsEntry 3 }



-- ************************************************************
-- Tx collisions table
-- ************************************************************
	 flAcm110MvTxCollisionsTable               OBJECT-TYPE
         SYNTAX  SEQUENCE OF FlAcm110MvTxCollisionsEntry
         MAX-ACCESS   not-accessible
         STATUS  current
         DESCRIPTION
         "This table provides the collision statistics for all ports.
		  Table is read only"
     ::= { flAcm110MvStatistics 60 }

     flAcm110MvTxCollisionsEntry				OBJECT-TYPE
         SYNTAX  FlAcm110MvTxCollisionsEntry
         MAX-ACCESS   not-accessible
         STATUS  current
         DESCRIPTION
         "The entries of the table"
         INDEX { flMsChassisMvIndex,
				 flMsChassisModuleMvIndex,
				 flAcm110MvPortNumber }
     ::= { flAcm110MvTxCollisionsTable 1 }

		FlAcm110MvTxCollisionsEntry ::= SEQUENCE
		{
			 flAcm110MvTxTotalCols					Counter,
			 flAcm110MvTxLateCols					Counter,
			 flAcm110MvTxExcessiveCols				Counter,
			 flAcm110MvTxSingleCols					Counter,
			 flAcm110MvTxMultipleCols				Counter,
			 flAcm110MvTxColRefreshCounters			INTEGER,
			 flAcm110MvTxColClearCounters			INTEGER
		}


     flAcm110MvTxTotalCols				OBJECT-TYPE
		 SYNTAX    Counter
		 MAX-ACCESS     read-only
		 STATUS    current
		 DESCRIPTION
		 "Total number of collisions" 
	 ::= { flAcm110MvTxCollisionsEntry 1 }

     flAcm110MvTxLateCols				OBJECT-TYPE
		 SYNTAX    Counter
		 MAX-ACCESS     read-only
		 STATUS    current
		 DESCRIPTION
		 "Number of late collisions" 
	 ::= { flAcm110MvTxCollisionsEntry 2 }

     flAcm110MvTxExcessiveCols				OBJECT-TYPE
		 SYNTAX    Counter
		 MAX-ACCESS     read-only
		 STATUS    current
		 DESCRIPTION
		 "Number of excessive collisions" 
	 ::= { flAcm110MvTxCollisionsEntry 3 }

     flAcm110MvTxSingleCols				OBJECT-TYPE
		 SYNTAX    Counter
		 MAX-ACCESS     read-only
		 STATUS    current
		 DESCRIPTION
		 "Number of single collisions" 
	 ::= { flAcm110MvTxCollisionsEntry 4 }

     flAcm110MvTxMultipleCols				OBJECT-TYPE
		 SYNTAX    Counter
		 MAX-ACCESS     read-only
		 STATUS    current
		 DESCRIPTION
		 "Number of multiple collisions" 
	 ::= { flAcm110MvTxCollisionsEntry 5 }

     flAcm110MvTxColRefreshCounters		OBJECT-TYPE
		 SYNTAX    INTEGER	{
								normal		(1),
								refresh		(2)
							}
		 MAX-ACCESS     read-write
		 STATUS    current
		 DESCRIPTION
		 "Refresh the port's counters for this table" 
	 ::= { flAcm110MvTxCollisionsEntry 6 }

     flAcm110MvTxColClearCounters			OBJECT-TYPE
		 SYNTAX    INTEGER	{
								normal		(1),
								clear		(2)
							}
		 MAX-ACCESS     read-write
		 STATUS    current
		 DESCRIPTION
		 "Clear the port's counters for this table" 
	 ::= { flAcm110MvTxCollisionsEntry 7 }


END