--  =====================================================================================================
--  File              : FIBROLAN-MIB-DEVICECONVERTERS.mib
--  Description       : Private MIB file for FibroLAN MetroStar I system converters - F.CON1/MA, H.CON/MA
--  By                : Tal Katz-Touaf
--  MIB Version       : 2.0
--  MetroStar Version : 1.6.2/build 12
--  Date              : January 17, 2008
--  =====================================================================================================
--
--
-- Copyright Fibrolan, 2008. All rights reserved.
--
-- Reproduction of this document is authorized on condition that this
-- copyright notice is included.
--
FIBROLAN-MIB-DEVICECONVERTER   DEFINITIONS ::= BEGIN

	 IMPORTS
		enterprises, OBJECT-TYPE, MODULE-IDENTITY       FROM SNMPv2-SMI --FROM RFC-1212
		MODULE-COMPLIANCE, OBJECT-GROUP			FROM SNMPv2-CONF
		DisplayString					FROM SNMPv2-TC --FROM RFC1213-MIB
		flMsChassisMvIndex, flMsChassisModuleMvIndex	FROM FIBROLAN-MIB-METRO-STAR-MV
		flMsModuleMvChannelIndex			FROM FIBROLAN-MIB-MSMODULE;


 flConverter  MODULE-IDENTITY
       LAST-UPDATED "0801170000Z"  
       ORGANIZATION "Fibrolan ltd"
       CONTACT-INFO
         "http://www.fibrolan.com"
       DESCRIPTION
         "The MIB module to describe FibroLAN HCON1/MA and FCON1MA converters.
          Copyright (C) Fibrolan Ltd (2008)."
	::= { enterprises 4467 100 50 10 }


    -- conformance information
     flConverterMIBConformance
                   OBJECT IDENTIFIER ::= { flConverter  1 }

     flConverterMIBCompliances		OBJECT IDENTIFIER ::= { flConverterMIBConformance 1 }
     flConverterMIBGroups		OBJECT IDENTIFIER ::= { flConverterMIBConformance 2 }


	-- compliance statements
     flConverterMIBCompliance MODULE-COMPLIANCE
              STATUS  current
              DESCRIPTION
                      "The compliance statement for flMetroStar entities
                      which implement the converters MIB."
              MODULE  -- this module
                  MANDATORY-GROUPS {	flConverterDeviceGroup,
					flConverterChannelGroup  }
              ::= { flConverterMIBCompliances 1 }

     flConverterDeviceGroup	OBJECT-GROUP
	        OBJECTS		{	flConverterDeviceReset,
					flConverterDeviceRestoreDefaults,
					flConverterDeviceFirmRevision,
					flConverterDeviceSerialNumber,
					flConverterDeviceTemperature }
            STATUS  current
            DESCRIPTION
                    "A collection of objects providing basic
                    instrumentation of the MetroStar HCON/MA and FCON1/MA entity."
            ::= { flConverterMIBGroups 1 }

     flConverterChannelGroup	OBJECT-GROUP
	        OBJECTS		{	flConverterChannelConfigIndex,
					flConverterTpLink,
					flConverterFoLink,
					flConverterPortDescription,
					flConverterDuplex,     -- only for HCON/MA
					flConverterTpAutoNego, -- only for HCON/MA
					flConverterTpDatarate, -- only for HCON/MA
					flConverterUpstreamBw,
					flConverterEnableTpPort,
					flConverterPause,
					flConverterFo2TpFp }
            STATUS  current
            DESCRIPTION
                    "A collection of objects providing extended
                    instrumentation of the MetroStar  HCON/MA and FCON1/MA entity."
            ::= { flConverterMIBGroups 2 }


-- ************************************************************
-- ************************************************************
-- FibroLan Object Identifier Definition
-- ************************************************************
-- ************************************************************

fibrolan             OBJECT IDENTIFIER ::= { enterprises           4467 }

fibrolanSNMP         OBJECT IDENTIFIER ::= { fibrolan               100 }

flMaRemoteDevice     OBJECT IDENTIFIER ::= { fibrolanSNMP	         50 }

--flConverter 		OBJECT IDENTIFIER ::= { flMaRemoteDevice        10 }


flConverterDevice			OBJECT IDENTIFIER ::= { flConverter	    10 }
flConverterChannel			OBJECT IDENTIFIER ::= { flConverter	    20 }


-- ************************************************************
-- ************************************************************
-- ************************************************************
-- Device configuration group
-- ************************************************************
-- ************************************************************
-- ************************************************************
     flConverterDeviceConfigTable               OBJECT-TYPE
         SYNTAX  SEQUENCE OF FlConverterDeviceConfigEntry
         MAX-ACCESS   not-accessible
         STATUS  current
         DESCRIPTION
         "This table provides the device's general configuration"
     ::= { flConverterDevice 1 }

     flConverterDeviceConfigEntry				OBJECT-TYPE
         SYNTAX  FlConverterDeviceConfigEntry
         MAX-ACCESS   not-accessible
         STATUS  current
         DESCRIPTION
         "The entries of the table"
         INDEX { flMsChassisMvIndex,
		 flMsChassisModuleMvIndex,
		 flMsModuleMvChannelIndex }
     ::= { flConverterDeviceConfigTable 1 }

		FlConverterDeviceConfigEntry ::= SEQUENCE
		{
			 flConverterDeviceReset			INTEGER,
			 flConverterDeviceRestoreDefaults	INTEGER,
			 flConverterDeviceFirmRevision		DisplayString,
			 flConverterDeviceSerialNumber		DisplayString,
			 flConverterDeviceTemperature		INTEGER
		}

     flConverterDeviceReset				OBJECT-TYPE
		 SYNTAX    INTEGER {                     
						  	  normal   (1), 
						  	  reset	   (2)  
						   }                     
		 MAX-ACCESS     read-write
		 STATUS    current
		 DESCRIPTION
		 "Reset device" 
     ::= { flConverterDeviceConfigEntry 2 }

     flConverterDeviceRestoreDefaults				OBJECT-TYPE
		 SYNTAX    INTEGER {                     
						  	  normal	(1), 
						  	  restore	(2)  
						   }                     
		 MAX-ACCESS     read-write
		 STATUS    current
		 DESCRIPTION
		 "Restore the device's defaults configuration" 
     ::= { flConverterDeviceConfigEntry 3 }

     flConverterDeviceFirmRevision				OBJECT-TYPE
		 SYNTAX    DisplayString
		 MAX-ACCESS     read-only
		 STATUS    current
		 DESCRIPTION
		 "The device's Firmware revision" 
     ::= { flConverterDeviceConfigEntry 4 }

     flConverterDeviceSerialNumber				OBJECT-TYPE
		 SYNTAX    DisplayString
		 MAX-ACCESS     read-only
		 STATUS		current
		 DESCRIPTION
		 "The device's serial number (non supporting models will show N/A" 
     ::= { flConverterDeviceConfigEntry 5 }

     flConverterDeviceTemperature				OBJECT-TYPE
		 SYNTAX    INTEGER 
		 MAX-ACCESS     read-only
		 STATUS    current
		 DESCRIPTION
		 "Device's temperature in degrees Celsius (for supporting devices)" 
     ::= { flConverterDeviceConfigEntry 6 }
     

-- ************************************************************
-- ************************************************************
-- ************************************************************
--  Channel configuration group
-- ************************************************************
-- ************************************************************
-- ************************************************************
     flConverterChannelConfigTable               OBJECT-TYPE
         SYNTAX  SEQUENCE OF FlConverterChannelConfigEntry
         MAX-ACCESS   not-accessible
         STATUS  current
         DESCRIPTION
         "This table provides the channel's configuration"
     ::= { flConverterChannel 1 }

     flConverterChannelConfigEntry				OBJECT-TYPE
         SYNTAX  FlConverterChannelConfigEntry
         MAX-ACCESS   not-accessible
         STATUS  current
         DESCRIPTION
         "The entries of the channel table"
         INDEX { flMsChassisMvIndex,
		 flMsChassisModuleMvIndex,
		 flMsModuleMvChannelIndex,
		 flConverterChannelConfigIndex }
     ::= { flConverterChannelConfigTable 1 }

		FlConverterChannelConfigEntry ::= SEQUENCE
		{
			 flConverterChannelConfigIndex		INTEGER,
			 flConverterTpLink			INTEGER,
			 flConverterFoLink			INTEGER,
			 flConverterPortDescription		DisplayString,
			 flConverterDuplex			INTEGER, -- only for HCON/MA
			 flConverterTpAutoNego			INTEGER, -- only for HCON/MA
			 flConverterTpDatarate			INTEGER, -- only for HCON/MA
			 flConverterUpstreamBw			INTEGER,
			 flConverterEnableTpPort		INTEGER,
			 flConverterPause			INTEGER,
			 flConverterFo2TpFp			INTEGER
		}


     flConverterChannelConfigIndex				OBJECT-TYPE
		 SYNTAX    INTEGER
		 MAX-ACCESS     read-only
		 STATUS    current
		 DESCRIPTION
		 "Table index" 
     ::= { flConverterChannelConfigEntry 1 }

    flConverterTpLink				OBJECT-TYPE
		SYNTAX	  INTEGER	{
					off     (1),
					on	(2),
					killed  (3)
					}
         MAX-ACCESS     read-only
		 STATUS    current
		 DESCRIPTION
	     "TP link status"
    ::= { flConverterChannelConfigEntry 2 }

    flConverterFoLink				OBJECT-TYPE
		SYNTAX	  INTEGER	{
         				off  (1),
					on   (2)
					}
         MAX-ACCESS     read-only
		 STATUS    current
		 DESCRIPTION
		 "FO link status"
    ::= { flConverterChannelConfigEntry 3 }

    flConverterPortDescription			OBJECT-TYPE
		 SYNTAX    DisplayString
		 MAX-ACCESS     read-write
		 STATUS    current
		 DESCRIPTION
		 "Port's textual description - up to 40 characters" 
    ::= { flConverterChannelConfigEntry 4 }

    -- only for HCON/MA
    flConverterDuplex					OBJECT-TYPE  
		 SYNTAX    INTEGER	{
					hdx	(1),
					fdx	(2)
					}
         MAX-ACCESS     read-write
         STATUS    current
         DESCRIPTION
         "Port's Duplex mode"
    ::= { flConverterChannelConfigEntry 5 }

    -- only for HCON/MA
    flConverterTpAutoNego				OBJECT-TYPE  
		 SYNTAX    INTEGER	{
					disabled	(1),
					enabled		(2)
					}
         MAX-ACCESS     read-write
         STATUS    current
         DESCRIPTION
         "Port's Auto-Negotiation mode"
    ::= { flConverterChannelConfigEntry 6 }

	-- only for HCON/MA
    flConverterTpDatarate				OBJECT-TYPE
		 SYNTAX    INTEGER	{
					m10	(1),
					m100	(2)
					}
         MAX-ACCESS     read-write
         STATUS    current
         DESCRIPTION
         "Port's data rate mode - 10/100Mbps"
    ::= { flConverterChannelConfigEntry 7 }

    flConverterUpstreamBw				OBJECT-TYPE
		 SYNTAX    INTEGER {
								k256			(129),
								k512			(130),
								m01			(1),
								m02			(2),
								m03			(3),
								m04			(4),
								m05			(5),
								m06			(6),
								m07			(7),
								m08			(8),
								m09			(9),
								m10			(10),
								m20			(20),
								m30			(30),
								m40			(40),
								m50			(50),
								m60			(60),
								m70			(70),
								m80			(80),
								m90			(90),
								m100			(100)
						   }
         MAX-ACCESS     read-write
         STATUS    current
         DESCRIPTION
         "Port's upstream Bandwidth "
    ::= { flConverterChannelConfigEntry  8 }

    flConverterEnableTpPort				OBJECT-TYPE
		SYNTAX	  INTEGER	{
					disable  (1),
					enable   (2)
					}
         MAX-ACCESS     read-write
		 STATUS    current
		 DESCRIPTION
		 "Disable/Enable TP port"
    ::= { flConverterChannelConfigEntry  9 }

   flConverterPause				OBJECT-TYPE
		SYNTAX	  INTEGER	{		                                               
					off  (1),
					on   (2)
					}
         MAX-ACCESS     read-write
		 STATUS    current
		 DESCRIPTION
		 "Turn Pause Mode on/off"
    ::= { flConverterChannelConfigEntry  10 }                   
			
    flConverterFo2TpFp				OBJECT-TYPE
		SYNTAX	  INTEGER	{
					off  (1),
					on   (2)
					}
         MAX-ACCESS     read-write
		 STATUS    current
		 DESCRIPTION
		"FO to TP Fp Mode"
    ::= { flConverterChannelConfigEntry  11 }

END