OPTICSIM-ETHNE-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, Gauge32, Unsigned32 FROM SNMPv2-SMI RowStatus, TruthValue, AutonomousType, TEXTUAL-CONVENTION FROM SNMPv2-TC ifIndex, InterfaceIndexOrZero FROM IF-MIB opticsimEthMib, opticsimEthMC FROM OPTICSIM-ETHREG-MIB ifMauIfIndex, ifMauIndex FROM MAU-MIB OpticsIMLayer2ProtocolList, OpticsIMETSVlanCfg FROM OpticsIMETS-MIB OpticsIMUserLabel FROM TSDIM-SNMP-TC OpticsIMETSIpDscp FROM OpticsIMETS-MIB Gauge FROM RFC1155-SMI; opticsimEthNEMib MODULE-IDENTITY LAST-UPDATED "202006080000Z" ORGANIZATION "Alcatel Optics" CONTACT-INFO "Alcatel Optics" DESCRIPTION "Optics-IM Ethernet NE MIB " REVISION "202006080000Z" DESCRIPTION "Added to opticsIMifMauExtTable: - opticsIMifMauExtSynchRoleResult " REVISION "201702280000Z" DESCRIPTION "-SNMPIDL-523 -L.Cai -V5.13 Added to opticsIMEthConfTable: - opticsIMEthAFRCompensation " REVISION "201604130000Z" DESCRIPTION "-SNMPIDL-515, added the object opticsIMEthHwFailConsAct to OpticsIMEthConfEntry. " REVISION "201511130000Z" DESCRIPTION "-SNMPIDL-507, update LAST-UPDATED and REVISION date format adding the 2 digits missing (20) for yers after 1999. Added a REVISION block corresponding to the LAST-UPDATED timestamp. - SNMPIDL-508, added a space between opening and closing braces and the enclosed content. " REVISION "201407310000Z" DESCRIPTION "OPTnm26875 and OPTnm26874: D. Spreafico: Added opticsIMifMauExtOpticalTransmittedSignalLevel and opticsIMifMauExtEthernetCompliance on opticsIMifMauExtTable. " REVISION "201405090000Z" DESCRIPTION "OPTnm26601: C. Addeo: Added opticsIMifMauExtDirectionMode on OpticsIMifMauExtTable. " REVISION "201307060000Z" DESCRIPTION "OPTnm18364: D. Spreafico: Added opticsIMifMauExtOpticalReceivedSignalLevel to opticsIMifMauExtTable OPTnm18366: D. Spreafico: Added opticsIMEthHoldOffMode on opticsIMEthConfTable. " REVISION "201303140000Z" DESCRIPTION "OPTnm18364: D. Spreafico: Added opticsIMifMauExtOpticalReceivedSignalLevel to opticsIMifMauExtTable OPTnm18366: D. Spreafico: Added opticsIMEthHoldOffMode on opticsIMEthConfTable. " REVISION "201301100000Z" DESCRIPTION "ONDnm15848: Linhai Qiu. Added opticsIMaclPortIndicatorAssociation in opticsIMaclTable." REVISION "201206080000Z" DESCRIPTION "ONDnm09837: P.Villa. Added opticsIMEthForcedOutgoingSSM." REVISION "201111030000Z" DESCRIPTION "OPTnm02748: P.Villa Added opticsIMaclMacAceProtocolId and opticsIMaclActualMacAceProtocolId" REVISION "201107270000Z" DESCRIPTION "OPTnm00305: P.Villa Added opticsIMaclMacAceSourceTcpPort, opticsIMaclMacAceMaxSourceTcpPort, opticsIMaclMacAceDestTcpPort, opticsIMaclMacAceMaxDestTcpPort, opticsIMaclMacAceSourceUdpPort, opticsIMaclMacAceMaxSourceUdpPort, opticsIMaclMacAceDestUdpPort, opticsIMaclMacAceMaxDestUdpPort, opticsIMaclMacAceSourceIPV6Addr, opticsIMaclMacAceSourceIPV6AddrBitmask, opticsIMaclMacAceDestIPV6Addr, opticsIMaclMacAceDestIPV6AddrBitmask Added opticsIMaclActualMacAceSourceTcpPort, opticsIMaclActualMacAceMaxSourceTcpPort, opticsIMaclActualMacAceDestTcpPort, opticsIMaclActualMacAceMaxDestTcpPort, opticsIMaclActualMacAceSourceUdpPort, opticsIMaclActualMacAceMaxSourceUdpPort, opticsIMaclActualMacAceDestUdpPort, opticsIMaclActualMacAceMaxDestUdpPort, opticsIMaclActualMacAceSourceIPV6Addr, opticsIMaclActualMacAceSourceIPV6AddrBitmask, opticsIMaclActualMacAceDestIPV6Addr, opticsIMaclActualMacAceDestIPV6AddrBitmask " REVISION "201105200000Z" DESCRIPTION "TSDnm93666: P.Villa. Upgraded opticsIMEthConfExtMirrorType" REVISION "1005130000Z" DESCRIPTION "Added opticsIMaclMacAceSourceIPV4Addr,opticsIMaclMacAceSourceIPV4AddrBitmask, opticsIMaclMacAceDestIPV4Addr,opticsIMaclMacAceDestIPV4AddrBitmask, opticsIMaclMacAceIpDscp,opticsIMaclMacAceIpDscpRange,opticsIMaclMacAceIpDscpBitMask Added opticsIMaclActualMacAceSourceIPV4Addr,opticsIMaclActualMacAceSourceIPV4AddrBitmask, opticsIMaclActualMacAceDestIPV4Addr,opticsIMaclActualMacAceDestIPV4AddrBitmask, opticsIMaclActualMacAceIpDscp,opticsIMaclActualMacAceIpDscpRange, opticsIMaclActualMacAceIpDscpBitMask" REVISION "201004010000Z" DESCRIPTION "Linhai Qiu: Add opticsIMStormcontrolPointer/opticsIMPacketFilteringPointer into opticsIMEthConfTable" REVISION "0909300000Z" DESCRIPTION "D.Spreafico: notRelevant enumerated value is inserted in opticsIMifMauExtSynchRole" REVISION "0908060000Z" DESCRIPTION "Upgraded opticsIMEthClientType" REVISION "0904230000Z" DESCRIPTION "Added opticsIMifMauExtSynchOperationMode and opticsIMifMauExtSynchRole to OpticsIMifMauExtEntry" REVISION "0812180000Z" DESCRIPTION "Added opticsIMaclMacAcePriority and opticsIMaclMacAcePriorityBitMask to opticsIMaclMacAceEntry Added opticsIMaclActualMacAcePriority and opticsIMaclActualMacAcePriorityBitMask to opticsIMaclActualMacAceEntry Added linkagg value to opticsIMEthClientType" REVISION "0711290000Z" DESCRIPTION "Added opticsIMEthConfExtCsfMAUAction and opticsIMEthConfExtSsfMAUAction to OpticsIMEthConfExtEntry Added opticsIMaclMacAceVidBitmask and opticsIMaclMacAceEtherTypeBitmask to OpticsIMAclMacAceEntry" REVISION "200710110000Z" DESCRIPTION "Added to opticsIMMauExtEntry: - opticsIMifMauExtOpticalLinkLength. " REVISION "200707190000Z" DESCRIPTION "Ed. 14 Added to opticsIMEthConfEntry: - opticsIMEthCirOverbookingFactor - opticsIMEthEirOverbookingFactor ." REVISION "200702280000Z" DESCRIPTION "Ed. 13 Added OpticsIMEthETSServiceStatus to opticsIMEthConfExtEntry" REVISION "200612210000Z" DESCRIPTION "Ed. 12 Added OpticsIMEthETSServiceType to opticsIMEthConfExtEntry" REVISION "200602160000Z" DESCRIPTION "Ed. 11 Added to opticsIMEthConfExtEntry: - opticsIMEthConfExtMirrorType - opticsIMEthConfExtMirrorPortSelect " REVISION "200510270000Z" DESCRIPTION "Ed. 10 Added to OpticsIMEthConfEntry: - opticsIMEthPortProfile Added textual convention of PortProfile Added to OpticsIMifMauExtEntry - opticsIMifMauExtCrossoverMode, - opticsIMifMauExtCrossoverState " REVISION "200506070000Z" DESCRIPTION "Ed. 9 Added linkagg value to opticsIMEthClientType Added to opticsIMifMauExtTable: - opticsIMifMauExtOpticalChannelType - opticsIMifMauExtOpticalChannelLambda - opticsIMifMauExtOpticalChannelSpacing Added opticsIMEthMaclIndex to OpticsIMEthConfEntry Added opticsIMaclIndexNext, opticsIMaclMacAceIndexNext Added opticsIMaclMacAceEntry, opticsIMaclMacAceTable, opticsIMaclMacEntry, opticsIMaclTable. Added read-only table opticsIMaclActualMacAceEntry, opticsIMaclActualMacAceTable " REVISION "200504070000Z" DESCRIPTION "Ed. 8.1 Added opticsIMEthLayer2ProtocolList" REVISION "200409100000Z" DESCRIPTION "Ed. 7.3 Added opticsIMEthConfExtTable Changed opticsIMEthConfExtRemCsfMAUAction" REVISION "200406150000Z" DESCRIPTION "Ed. 6.2 Added to opticsIMEthConfTable: - opticsIMEthAdmittedFractionalRate " REVISION "200403240000Z" DESCRIPTION "Ed. 5.1 Clarification of behavior of - opticsIMEthConfVLANEtherType " REVISION "200311140000Z" DESCRIPTION "Ed. 4.1 Added the following object - opticsIMEthClientType " REVISION "200309260000Z" DESCRIPTION "Ed. 3.2 Added to opticsIMEthConfTable: - opticsIMEthFCSDiscardErroredFrames - opticsIMEthDefaultPause Added the following table: - opticsIMifMauExtTable " REVISION "200307250000Z" DESCRIPTION "Ed. 2.2 Added the following objects: - opticsIMEthVLANTypeTable - opticsIMEthVLANTypeIndexNext Added to opticsIMEthConfTable: - opticsIMEthConfVLANEtherType " REVISION "200306050000Z" DESCRIPTION "Ed. 2.1 Added to opticsIMEthConfTable: - opticsIMEthAvailableBandwidth Changed MAX-ACCESS (from read-create to read-write): - opticsIMEthConfEncaps " REVISION "200211280000Z" DESCRIPTION "Initial Release Optics-IM Ethernet NE MIB" ::= { opticsimEthMib 2 } opticsimEthNEMibObject OBJECT IDENTIFIER ::= { opticsimEthNEMib 1 } PortProfile ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "An octet string containing a list of tag values. A tag value is an arbitrary string of octets, but it does not contain a delimiter character, which delimits the tags in the list. The delimiter character is the ASCII space character (0x20). The empty string is a valid list. The tag indicates a functionality, which behaviour has been commonly agreed. Example of valid tags are: port2port, l2switch." SYNTAX OCTET STRING -- opticsIMEthConfTable opticsIMEthConfTable OBJECT-TYPE SYNTAX SEQUENCE OF OpticsIMEthConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This media-specific interface table is used to define the proprietary configuration parameters for the Ethernet interfaces." ::= { opticsimEthNEMibObject 1 } opticsIMEthConfEntry OBJECT-TYPE SYNTAX OpticsIMEthConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { ifIndex } ::= { opticsIMEthConfTable 1 } OpticsIMEthConfEntry ::= SEQUENCE { opticsIMEthMauIndex Integer32, opticsIMEthJackIndex Integer32, opticsIMEthConfEncaps INTEGER, opticsIMEthAvailableBandwidth Integer32, opticsIMEthConfVLANEtherType Unsigned32, opticsIMEthFCSDiscardErroredFrames TruthValue, opticsIMEthDefaultPause INTEGER, opticsIMEthClientType INTEGER, opticsIMEthAdmittedFractionalRate Integer32, opticsIMEthLayer2ProtocolList OpticsIMLayer2ProtocolList, opticsIMEthMaclIndex Integer32, opticsIMEthPortProfile PortProfile, opticsIMEthETSServiceType INTEGER, opticsIMEthETSServiceStatus Unsigned32, opticsIMEthCirOverbookingFactor Unsigned32, opticsIMEthEirOverbookingFactor Unsigned32, -- Begin CRB Nov 2008 opticsIMEthAutomaticTxShutdown TruthValue, opticsIMEthWaitForDetection Gauge32, -- End CRB Nov 2008 -- Begin 20100401 -- opticsIMStormcontrolPointer INTEGER, opticsIMPacketFilteringPointer INTEGER, -- End 20100401 -- -- Begin ONDnm09837 - P.Villa - V5.00. opticsIMEthForcedOutgoingSSM INTEGER, -- End ONDnm09837. -- Begin xxx - D.Spreafico - V5.03. opticsIMEthHoldOffMode INTEGER, -- End xxx. -- Begin xxx - D.Spreafico - V5.04. opticsIMEthLosEPSSwitchCriteria INTEGER, -- End xxx. -- Begin SNMPIDL-515 - F.Ruggi - V5.12. opticsIMEthHwFailConsAct INTEGER, -- End SNMPIDL-515 -- Begin SNMPIDL-523 - L. Cai - V5.13 opticsIMEthAFRCompensation Integer32 -- Begin SNMPIDL-523 20160628 -- } opticsIMEthMauIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute contains the number of the MAU port that is associated to an internal interface at MAU creation time. This object must be 0 if the interface has not a 'Mau' Underlie Layer." ::= { opticsIMEthConfEntry 1 } opticsIMEthJackIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute contains the number of the MAU connector that is associated to a MAU port at MAU and hence to an internal interface at MAU creation time. This object must be 0 if the interface has not a 'Mau' Underlie Layer." ::= { opticsIMEthConfEntry 2 } opticsIMEthConfEncaps OBJECT-TYPE SYNTAX INTEGER { ethernetV2(1), llc-snap (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The encapsulation method used by the local Ethernet entity." DEFVAL { 1 } ::= { opticsIMEthConfEntry 3 } opticsIMEthAvailableBandwidth OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "This value indicates the total amount of available bandwidth available on this interface and is specified in kilobits per second (Kbps). This value is calculated as the difference between the amount of bandwidth currently in use and that specified in ifSpeed (converted in Kbps). When this value cannot be measured, this value should contain the nominal bandwidth." ::= { opticsIMEthConfEntry 4 } opticsIMEthConfVLANEtherType OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "This object points to an entry in the opticsIMEthVLANTypeTable that represents the EtherType value used to detect VLAN tagged frames received from this interface as well as to insert VLAN tag(s) to the frames to be transmitted (when applicable). The value 0 is reserved to represent the IEEE 802.1Q standard EtherType (i.e. 0x8100). The default value is 0 (IEEE 802.1Q standard EtherType). The value of this object is meaningless for MAC bridge (IEEE 802.1D) ports. The value of this object MUST be equal to 0 for Virtual bridge (IEEE 802.1Q) ports. The value of this object MUST be the same for all Provider bridge (pre-IEEE 802.1ad) ports." ::= { opticsIMEthConfEntry 5 } opticsIMEthFCSDiscardErroredFrames OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If this object is set to TRUE, the incoming errored Ethernet frames are discarded, if it is set to FALSE the incoming errored Ethernet frames are forwarded as the correct ones." ::= { opticsIMEthConfEntry 6 } opticsIMEthDefaultPause OBJECT-TYPE SYNTAX INTEGER { disabled (0), asymmetric-PAUSE (1), symmetric-PAUSE (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object identifies the default administrative PAUSE type. When the underlying layer is mau, this object represent the administratively-configured type of Flow Control operations supported by the Ethernet port. If auto-negotiation is not enabled or is not implemented for this MAU, the value of this object determines the operational type of the Flow Control. In this case, a set to this object will force the Flow Control into the specified operating mode. If auto-negotiation is implemented and enabled for this MAU, the operational type of the Flow Control is determined by the auto-negotiation, and the value of this object denotes the type to which the Flow Control will automatically revert if/when auto-negotiation is later disabled. When the underlying layer is not mau, this object can be set only to the disabled (0) value." ::= { opticsIMEthConfEntry 7 } opticsIMEthClientType OBJECT-TYPE SYNTAX INTEGER { ets (1), etb (2), linkagg (3), elp (4), pnp (5) } MAX-ACCESS read-write STATUS current DESCRIPTION "It is used to determine the transmission direction of the frames received from the Ethernet Port. - ETS (1) the frame will be sent to ETS Layer. - ETB (2) the frame will be sent to Ethernet Switch Layer. - LINKAGG (3) the frame will be sent to Link Aggregation Layer. - ELP (4) the frame will be sent to Link Protection Group. - PNP (5) the frame will be sent to PBB Provider Network Port " ::= { opticsIMEthConfEntry 8 } opticsIMEthAdmittedFractionalRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates the threshold value of admitted bandwidth on this interface and is specified in kilobits per second (Kbps). This value is requested to trigger PAUSE frame generation and is minor or equal to that specified in ifSpeed." ::= { opticsIMEthConfEntry 9 } opticsIMEthLayer2ProtocolList OBJECT-TYPE SYNTAX OpticsIMLayer2ProtocolList MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter enables to choose if to tunnel, toward a Provider Network, or filter Layer 2 Control frames. If the bit is 1 it indicates that the relative frame will be tunneled otherwise if 0 it will be discarded. Default value is all bits set to 1, so tunneling everything. This parameter is significant only if the opticsIMEthClientType is 'ets'." ::= { opticsIMEthConfEntry 10 } opticsIMEthMaclIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object value is the pointer to an entry of opticsIMaclMacTable, representing MACL table.By default the value is zero, indicating no pointer to MACL table" ::= { opticsIMEthConfEntry 11 } opticsIMEthPortProfile OBJECT-TYPE SYNTAX PortProfile MAX-ACCESS read-only STATUS current DESCRIPTION "The opticsIMEthPortProfile indicates the capabilities and specific or particular behaviour provided by the Ethernet port which managers have to take into account. The default value is the empty string, it means that no peculiarities are present." ::= { opticsIMEthConfEntry 12 } opticsIMEthETSServiceType OBJECT-TYPE SYNTAX INTEGER { other (0), etsVirtualSwitch (1), portToPort (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "It is used to specify Ethernet Service configuration for an Ethernet Port with ets as Client Type. - Other (0) Ethernet Port supports a generic ETS-flow based Ethernet service with any InFlow Service Type value and any OutFlow Server Type value - ETSVirtualSwitch (1) Ethernet Port supports a 2-Ports ETS Virtual Switch service with Ethernet as unique admitted InFlow Service Type and unique admitted OutFlow Server Type - PortToPort (2) Ethernet Port supports a Port-to-Port Service with Ethernet as Service Type of unique admitted InFlow and Ethernet as Server Type of unique admitted OutFlow. Default value is Other(0)" ::= { opticsIMEthConfEntry 13 } opticsIMEthETSServiceStatus OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute reports the actual status of those ETS Service types defined over Ethernet Ports with ets as Client Type. This attribute is meaningless in case of Other as ETS Service type. When opticsIMEthETSServiceType is different from Other, the value of this object is: - 0 if ETS Service Type over this EthernetPort is not yet active; - the ifIndex of the peer ETS Service aware port, if ETS Service Type over that Ethernet Port is active." ::= { opticsIMEthConfEntry 14 } opticsIMEthCirOverbookingFactor OBJECT-TYPE SYNTAX Unsigned32 (0|100..10000) UNITS "percentile" MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute defines the overbooking (OB) factor for the CIR BW. The overbooking factor is defined as a percentile. The overbooked CIR BW is calculated as OB CIR BW = (CIR BW * 'opticsIMEthCirOverbookingFactor/ 100). When the value of 'opticsIMEthCirOverbookingFactor' is equal to 100 it means that the OB CIR BW = CIR BW. When the value of 'opticsIMEthCirOverbookingFactor' is equal to 0 it means unlimited overbooking i.e. effectively CoS is set as Best Effort." DEFVAL { 0 } ::= { opticsIMEthConfEntry 15 } opticsIMEthEirOverbookingFactor OBJECT-TYPE SYNTAX Unsigned32 (0|100..10000) UNITS "percentile" MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute defines the overbooking (OB) factor for the EIR BW. EIR BW is calculated as EIR = PIR BW - CIR BW. The overbooking factor is defined as a percentile. The overbooked EIR BW is calculated as OB EIR BW = (EIR BW * 'opticsIMEthEirOverbookingFactor/ 100). When the value of 'opticsIMEthEirOverbookingFactor' is equal to 100 it means that the OB CIR BW = CIR BW. When the value of 'opticsIMEthEirOverbookingFactor' is equal to 0 it means unlimited overbooking i.e. effectively CoS is set as Best Effort." DEFVAL { 0 } ::= { opticsIMEthConfEntry 16 } -- Begin CRB Nov 2008 opticsIMEthAutomaticTxShutdown OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter enable the automatic shutdown of the Tx in case a LOS is detected in Rx." DEFVAL { false } ::= { opticsIMEthConfEntry 17 } opticsIMEthWaitForDetection OBJECT-TYPE SYNTAX Gauge32 (1..100) MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter specifies how long the Tx is maintained down after LOS is detected in Rx; the parameter is expressed in number of 100ms (the admitted WTR range is 100ms - 10s)." DEFVAL { 50 } ::= { opticsIMEthConfEntry 18 } -- End CRB Nov 2008 -- Begin 20100401 -- opticsIMStormcontrolPointer OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This object is pointed to opticsIMStormcontrolIndex. By default the value is zero, indicating no pointer to opticsIMStormCtlTable" ::= { opticsIMEthConfEntry 19 } opticsIMPacketFilteringPointer OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The index of packet filtering profile. By default the value is zero, indicating no pointer to opticsIMPksFilteringTable " ::= { opticsIMEthConfEntry 20 } -- End 20100401 -- -- Begin ONDnm09837 - P.Villa - V5.00. opticsIMEthForcedOutgoingSSM OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates outgoing SSM value for a local Ethernet port. The following values shall be supported: 100: NONE (Disabled Transmission of ESMC Messages) - Default value 0: AUTO (Automatic outgoing SSM value) In case of forced outgoing SSM value - 1: QL-PRC - 2: QL-SSU_A - 3: QL-SSU_B - 4: QL-EEC Option 1 - 5: DNU" ::= { opticsIMEthConfEntry 21 } -- End ONDnm09837 -- Begin xxxx - D.Spreafico - V5.03. opticsIMEthHoldOffMode OBJECT-TYPE SYNTAX INTEGER { disable (0), enable (1)} MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates if for the Ethernet interface, involved on a ERP Topology, it has to be applied the hold off time for the ERP protection." ::= { opticsIMEthConfEntry 22 } -- End xxxx -- Begin xxxx - D.Spreafico - V5.04. opticsIMEthLosEPSSwitchCriteria OBJECT-TYPE SYNTAX INTEGER { enabled (0), disabled (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies if the LOS of the Ethernet interface, hosted by a board involved on a Equipment Protection Group, is used as switch criteria." ::= { opticsIMEthConfEntry 23 } -- End xxxx -- Begin SNMPIDL-515 - F. Ruggi - V5.12. opticsIMEthHwFailConsAct OBJECT-TYPE SYNTAX INTEGER { holdon (0), shutdown (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the behaviour of the Ethernet interface in case the hosted equipment item is in hardware fail condition. In this case the Ethernet interface can try going on trasmitting signal, i.e. holdon (0) value, or shutting down the transmitter, i.e. shutdown (1) value. Default value is holdon (0). This object applies to the physical interface, either optical or electrical." ::= { opticsIMEthConfEntry 24 } -- End SNMPIDL-515 -- Begin SNMPIDL-523 - L. Cai -V5.13 opticsIMEthAFRCompensation OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " The data encapsulation of traffic from UNI to MPLS NNI, will be processed by NE to remove or add some overhead according to flow classification and related policy. Below is key Ethernet data encapsulation used with whole data path from UNI to MPLS NNI: L1 Ethernet Packet include: Preamble,SFD, L2 Ethernet Frame, IPG. This is typical characteristics at physical Ethernet Interface for UNI. L2 Ethernet Frame include: MAC DA/SA,optional 802.1ad/8021q VLAN tag,EtherType,Payload and FCS fields. This is typical characteristics processed by Switch. L1 MPLS Packet include: Preamble, SFD, MAC DA/SA, optional VLAN Tag,EtherType, TUNNEL label, PW label,Optional CW, L2 Ethernet Frame (with optional VLAN operation), IPG. This is typical characteristics at physical Ethernet Interface for MPLS NNI. AFR (admitted fractional Rate),referred as opticsIMEthAdmittedFractionalRate, is based on the traffic metering to trigger pause generation when AFR is reached. The default metering of traffic is applicable for L2 Ethernet frame, which remove 20bytes Preamble/SFD/IPG packet from L1 Ethernet Packet at physical interface, i.e. not based on metering of ifSpeed (refer to opticsIMEthAdmittedFractionalRate description). This de facto behaviour is deviated from AFR original definition. When AFR is applicable for bandwidth shaping with Ingress or Egress physical interface, the removed or appended Overhead versus Ethernet Frame shall be compensated to calibrate the traffic metering mechanism to reflect the traffic rate at Ingress or Egress interface based on the measurement of Ethernet Frames of ingress traffic per port. The value of opticsIMEthAFRCompensation, is defined to indicate the additional byte number shall be taken into account of metering of traffic rate. In order to calibration of traffic rate to ingress physical interface speed, i.e. Ethernet packet rate, 20 bytes (Preamble/SFD/IPG) shall be compensated; In order to calibration of traffic rate to Egress MPLS physical interface speed, i.e. MPLSIF packet rate, below added bytes shall be compensated: Ingress ETS flow VLAN operation (Optional) +4 bytes/VLAN Push -4 bytes/VLAN PoP PW CW (Optional) +4 bytes/enable mode MPLS frame +22bytes(DA/SA/EtherType/TUNNEL label/PW label) L2 encapsulation (Optional) +4 bytes(802.1Q or 802.1ad VLAN tag) Ethernet Packet Overhead +20bytes(Preamble/SFD/IPG) Without the compensation of this value, the AFR indicates the threshold value of admitted bandwidth for Ingress traffic measured with Ethernet Frame. With the compensation of this value, the Admitted fractional rate indicates the threshold value of admitted bandwidth for ingress or egress traffic measured with Ethernet Packet on the associated Ingress or Egress physical Interface. The default value shall be 0 to compatible with previous MIB definition. " ::= { opticsIMEthConfEntry 25 } -- End SNMPIDL-523 20160623 -- -- opticsIMEthVLANTypeTable -- opticsIMEthVLANTypeTable opticsIMEthVLANTypeIndexNext OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains an appropriate value to be used for opticsIMEthVLANTypeIndex when creating entries in the opticsIMEthVLANTypeTable. The value 0 indicates that no unassigned entries are available. To obtain the opticsIMEthVLANTypeIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index." ::= { opticsimEthNEMibObject 2 } opticsIMEthVLANTypeTable OBJECT-TYPE SYNTAX SEQUENCE OF OpticsIMEthVLANTypeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing vendor-specific profiles of the EtherType values used to support provider-bridge VLAN tags (or stacked VLAN)." ::= { opticsimEthNEMibObject 3 } opticsIMEthVLANTypeEntry OBJECT-TYPE SYNTAX OpticsIMEthVLANTypeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { opticsIMEthVLANTypeIndex } ::= { opticsIMEthVLANTypeTable 1 } OpticsIMEthVLANTypeEntry ::= SEQUENCE { opticsIMEthVLANTypeIndex Unsigned32, opticsIMEthVLANTypeEtherType Unsigned32, opticsIMEthVLANTypeUserLabel OpticsIMUserLabel, opticsIMEthVLANTypeRowStatus RowStatus } opticsIMEthVLANTypeIndex OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index for a row in the opticsIMEthVLANTypeTable. The range is 1...MAXVlanType, where MAXVlanType is product dependent." ::= { opticsIMEthVLANTypeEntry 1 } opticsIMEthVLANTypeEtherType OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the EtherType field. The default value is the IEEE 802.1Q standard value 0x8100." ::= { opticsIMEthVLANTypeEntry 2 } opticsIMEthVLANTypeUserLabel OBJECT-TYPE SYNTAX OpticsIMUserLabel MAX-ACCESS read-create STATUS current DESCRIPTION "The user label assigned to this EtherType profile." ::= { opticsIMEthVLANTypeEntry 3 } opticsIMEthVLANTypeRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "It is used to create, delete, activate and deactivate a row in the opticsIMEthVLANTypeTable." ::= { opticsIMEthVLANTypeEntry 4 } opticsIMifMauExtTable OBJECT-TYPE SYNTAX SEQUENCE OF OpticsIMifMauExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains extension objects of the ifMauTable." ::= { opticsimEthNEMibObject 4 } opticsIMifMauExtEntry OBJECT-TYPE SYNTAX OpticsIMifMauExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of the opticsIMifMauExtTable." INDEX { ifMauIfIndex, ifMauIndex } ::= { opticsIMifMauExtTable 1 } OpticsIMifMauExtEntry ::= SEQUENCE { opticsIMifMauExtAsapIndex Integer32, opticsIMifMauExtOpticalChannelType INTEGER, opticsIMifMauExtOpticalChannelLambda Integer32, opticsIMifMauExtOpticalChannelSpacing Integer32, opticsIMifMauExtCrossoverMode INTEGER, opticsIMifMauExtCrossoverState INTEGER, opticsIMifMauExtOpticalLinkLength Integer32, opticsIMifMauExtSynchOperationMode INTEGER, opticsIMifMauExtSynchRole INTEGER, opticsIMifMauExtOpticalReceivedSignalLevel INTEGER, opticsIMifMauExtDirectionMode INTEGER, opticsIMifMauExtOpticalTransmittedSignalLevel INTEGER, opticsIMifMauExtEthernetCompliance AutonomousType, opticsIMifMauExtSynchRoleResult INTEGER } opticsIMifMauExtAsapIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object defines tha ASAP object associated to the MAU interface." ::= { opticsIMifMauExtEntry 1 } opticsIMifMauExtOpticalChannelType OBJECT-TYPE SYNTAX INTEGER { blackWhite (1), colored (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "It is used to determine the type of Optical Channel carrying Ethernet interface and associated to the MAU interface" ::= { opticsIMifMauExtEntry 2 } opticsIMifMauExtOpticalChannelLambda OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object reports lambda (in nm) for optical channel (BlackWhite optical channel, Lambda optical channel) carrying Ethernet interface and associated to the MAU interface." ::= { opticsIMifMauExtEntry 3 } opticsIMifMauExtOpticalChannelSpacing OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object reports channel spacing (in nm) for colored optical channels carrying Ethernet interface" ::= { opticsIMifMauExtEntry 4 } opticsIMifMauExtCrossoverMode OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The opticsIMifMauExtCrossoverMode configures the mode of the positioning of trasmitter and receiver respect to the line: - automatic, with value equal to 1 (default value) means the positioning is performed in automatic way; - mdI, with value equal to 2, means tx and rx are as for DCE (e.g. Hub or switch); - mDIX, with value equal to 3, means they are reverted just as for DTE (e.g. PC)." ::= { opticsIMifMauExtEntry 5 } opticsIMifMauExtCrossoverState OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The opticsIMifMauExtCrossoverMode indicates, if possible, the positioning of trasmitter and receiver respect to the line: - unknown, with value equal to 1, if not identifiable - mdI, with value equal to 2, means tx and rx are as for DCE (e.g. Hub or switch) - mDIX, with value equal to 3, means they are reverted just as for DTE (e.g. PC)." ::= { opticsIMifMauExtEntry 6 } opticsIMifMauExtOpticalLinkLength OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object reports the link length (in m) supported for optical channel carrying Ethernet interface and associated to the MAU interface" ::= { opticsIMifMauExtEntry 7 } opticsIMifMauExtSynchOperationMode OBJECT-TYPE SYNTAX INTEGER { synchronous (1), asynchronous (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "It is used to define the Operation Mode (G.8264) of an Ethernet interface with the following values: - synchronous (1) the interface is belonging to a NE with system clock (EEC) and it should be used for synchronization purpose; in this case the opticsIMifMauExtSynchRole object has to be defined as 'master' or 'slave' value. - asynchronous (2) the interface is not belonging to a NE with system clock (EEC); in this case the opticsIMifMauExtSynchRole object could assume any value incuding 'auto' value (default)." ::= { opticsIMifMauExtEntry 8 } opticsIMifMauExtSynchRole OBJECT-TYPE SYNTAX INTEGER { notRelevant (0), master (1), slave (2), auto (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "A value that uniquely identifies the synchronization role of the Ethernet interface (1000Base-T) advertised by the local auto-negotiation entity. The 'auto' value is not allowed in case the opticsIMifMauExtSynchOperationMode is set to 'synchronous' value." ::= { opticsIMifMauExtEntry 9 } opticsIMifMauExtOpticalReceivedSignalLevel OBJECT-TYPE SYNTAX INTEGER (-1000..0) MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the local received power level. It is a negative integer with associated measure unit expressed in one tenth of dBm." ::= { opticsIMifMauExtEntry 10 } opticsIMifMauExtDirectionMode OBJECT-TYPE SYNTAX INTEGER { unidirectional (1), bidirectional (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "It is used to define the Interface Direction Mode (IEEE 802.3 clause 66) of an Ethernet interface with the following values: - unidirectional (1) When the interface detects an incoming failure (e.g., LOS), it keeps transmitting traffic in the outgoing direction and also inserts a remote failure indication, if such an indication is defined for that type of MAU (e.g., an RFI signal), to the remote interface. - bidirectional (2) When the interface detects an incoming failure (e.g., LOS), it stops transmitting traffic in the outgoing direction and also inserts a remote failure indication, if such an indication is defined for that type of MAU (e.g., an RFI signal), to the remote interface." ::= { opticsIMifMauExtEntry 11 } opticsIMifMauExtOpticalTransmittedSignalLevel OBJECT-TYPE SYNTAX INTEGER (-1000..1000) MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the local transmitted power level. It is an integer with associated measure unit expressed in one tenth of dBm." ::= { opticsIMifMauExtEntry 12 } opticsIMifMauExtEthernetCompliance OBJECT-TYPE SYNTAX AutonomousType MAX-ACCESS read-only STATUS current DESCRIPTION "This object reports the Ethernet Compliance (MAU type) supported by the physical module hosting this interface." ::= { opticsIMifMauExtEntry 13 } opticsIMifMauExtSynchRoleResult OBJECT-TYPE SYNTAX INTEGER { notRelevant (0), master (1), slave (2), none (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "A value that uniquely identifies the synchronization role of the Ethernet interface as the result of the auto-negotiatiation between local and peer entities. 'none' value in case auto-negotiation fail. 'notRelevant' in case of syncronization role not meaning the the Ethernet interface (optical)." ::= { opticsIMifMauExtEntry 14 } -- opticsIMEthConfExtTable opticsIMEthConfExtTable OBJECT-TYPE SYNTAX SEQUENCE OF OpticsIMEthConfExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains extension objects of the opticsIMEthConfTable." ::= { opticsimEthNEMibObject 5 } opticsIMEthConfExtEntry OBJECT-TYPE SYNTAX OpticsIMEthConfExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of the opticsIMEthConfExtTable." INDEX { ifIndex } ::= { opticsIMEthConfExtTable 1 } OpticsIMEthConfExtEntry ::= SEQUENCE { opticsIMEthConfExtlbLine TruthValue, opticsIMEthConfExtlbInternal TruthValue, opticsIMEthConfExtRemCsfMAUAction INTEGER, opticsIMEthConfExtMirrorType INTEGER, opticsIMEthConfExtMirrorPortSelect InterfaceIndexOrZero, -- CRB Oct2007 Begin opticsIMEthConfExtCsfMAUAction INTEGER, opticsIMEthConfExtSsfMAUAction INTEGER -- CRB Oct2007 End } opticsIMEthConfExtlbLine OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies if the line loopback is active or not. The default value is FALSE" ::= { opticsIMEthConfExtEntry 1 } opticsIMEthConfExtlbInternal OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies if the internal loopback is active or not. The default value is FALSE" ::= { opticsIMEthConfExtEntry 2 } opticsIMEthConfExtRemCsfMAUAction OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This object identifies the consequent action triggered on local Interface egress port in front of Client failures detection for port-to-port application. - disabled (0) is defined to perform no consequent actions. - transmitter_shutdown (1) is defined to trigger forced transmitter shut-down action. If the interface is not involved in a port-to-port application this consequent action will never be triggered. The default value is disabled" ::= { opticsIMEthConfExtEntry 3 } opticsIMEthConfExtMirrorType OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The port can be configured acting as a mirroring port: the available values are: 0 = no mirroring (the default value) 1 = mirroring a port input 2 = mirroring a port output -- TSDnm93666:P.Villa Begin 3 = BOTH input and output mirroring -- TSDnm93666:P.Villa End " ::= { opticsIMEthConfExtEntry 4 } opticsIMEthConfExtMirrorPortSelect OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-write STATUS current DESCRIPTION "This object points to an entry in the ifTable that represents the the port that is mirrored by the port identified by this entry of the opticsIMEthConfExtTable. The default value is 0 (zero) that means no port mirrored" ::= { opticsIMEthConfExtEntry 5 } -- CRB Oct2007 Begin opticsIMEthConfExtCsfMAUAction OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This object identifies the consequent action triggered on local Interface egress port for port-to-port application in front of received CSF Frame indications (due to detected remote Ethernet PHY Interface failures). The choice of enabled CSF consequent actions is allowed to be different from SSF consequent actions (consequent actions coping with SDH network failures). disabled (0) is defined to perform no consequent actions. transmitter_shutdown (1) is defined to trigger forced transmitter shut-down action. If the interface is not involved in a port-to-port application, this consequent action will never be triggered. The default value is disabled" ::= { opticsIMEthConfExtEntry 6 } opticsIMEthConfExtSsfMAUAction OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This object identifies the consequent action triggered on local Interface egress port for port-to-port application in front of Server Layer (e.g.SDH network) failures. The choice of enabled SSF consequent actions is allowed to be different from CSF consequent actions (consequent actions coping with in front of 'Far-end Client Signal Fail (CSF) indications'). disabled (0) is defined to perform no consequent actions. transmitter_shutdown (1) is defined to trigger forced transmitter shut-down action. If the interface is not involved in a port-to-port application, this consequent action will never be triggered. The default value is disabled" ::= { opticsIMEthConfExtEntry 7 } -- CRB Oct2007 End -- opticsIMEthConfExtTable -- END -- opticsIMaclIndexNext opticsIMaclNextIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains an appropriate value to be used for opticsIMaclIndex when creating entries in the opticsIMaclTable. The value 0 indicates that no unassigned entries are available. To obtain the opticsIMaclIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index." ::= { opticsimEthNEMibObject 6 } -- opticsIMaclMacAceIndexNext opticsIMaclMacAceIndexNext OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains an appropriate value to be used for opticsIMaclMacAceIndex when creating entries in the opticsIMaclMacAceTable. The value 0 indicates that no unassigned entries are available. To obtain the opticsIMaclMacAceIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned " ::= { opticsimEthNEMibObject 7 } -- Start opticsIMaclTable opticsIMaclTable OBJECT-TYPE SYNTAX SEQUENCE OF OpticsIMAclMacEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table representing the MAC acl. The table references through the index ifIndex the classifier entry associated to the Ethernet port(interface) which the MAC acl applies to." ::= { opticsimEthNEMibObject 8 } opticsIMAclMacEntry OBJECT-TYPE SYNTAX OpticsIMAclMacEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "MAC acl entry " INDEX { opticsIMaclIndex } ::= { opticsIMaclTable 1 } OpticsIMAclMacEntry ::= SEQUENCE { opticsIMaclIndex Integer32, opticsIMaclName OpticsIMUserLabel, opticsIMaclApplyChange TruthValue, opticsIMaclStatus RowStatus, opticsIMaclPortIndicatorAssociation TruthValue } opticsIMaclIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The unique index of an ACE within an ACL" ::= { opticsIMAclMacEntry 1 } opticsIMaclName OBJECT-TYPE SYNTAX OpticsIMUserLabel MAX-ACCESS read-create STATUS current DESCRIPTION "The name of an ACL. Within a feature the name is unique used to identifies the list to which the entry belongs in the device" ::= { opticsIMAclMacEntry 2 } opticsIMaclApplyChange OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "A flag to indicate when the changes to the acl are terminated and are applied. When an acl modification is on going, the attribute is equal to false for indicating that the on going changes are not applied." ::= { opticsIMAclMacEntry 3 } opticsIMaclStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this ACL conceptual row entry. This object is used to manage creation, deletion and modification of rows in this table. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Once a row becomes active, value in any other column within such row cannot be modified." ::= { opticsIMAclMacEntry 4 } opticsIMaclPortIndicatorAssociation OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The indication of any interface association. The default value is false. When any port is associated to ACL entry, the agent changes this value to true. This value is changed again to false, when the ACL entry is nomore associated to any interface" ::= { opticsIMAclMacEntry 5 } -- End opticsIMaclTable -- Start opticsIMaclMacAceTable opticsIMaclMacAceTable OBJECT-TYPE SYNTAX SEQUENCE OF OpticsIMAclMacAceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual table of all of aclMacAceEntry " ::= { opticsimEthNEMibObject 9 } opticsIMaclMacAceEntry OBJECT-TYPE SYNTAX OpticsIMAclMacAceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row for aclMacAceTable. " INDEX { opticsIMaclIndex, opticsIMaclMacAceIndex } ::= { opticsIMaclMacAceTable 1 } OpticsIMAclMacAceEntry ::= SEQUENCE { opticsIMaclMacAceIndex Integer32, opticsIMaclMacAceOrder Integer32, opticsIMaclMacAceAction INTEGER, opticsIMaclMacAceSourceMacAddr OCTET STRING, opticsIMaclMacAceSourceMacAddrBitmask OCTET STRING, opticsIMaclMacAceDestMacAddr OCTET STRING, opticsIMaclMacAceDestMacAddrBitmask OCTET STRING, opticsIMaclMacAceVid OpticsIMETSVlanCfg, opticsIMaclMacAceVidRange Gauge32, opticsIMaclMacAceEtherType Unsigned32, opticsIMaclMacAceEtherTypeRange Unsigned32, opticsIMaclMacAceStatus RowStatus, opticsIMaclMacAceVidBitmask OCTET STRING, opticsIMaclMacAceEtherTypeBitmask OCTET STRING, opticsIMaclMacAcePriority INTEGER, opticsIMaclMacAcePriorityBitMask OCTET STRING, opticsIMaclMacAceSourceIPV4Addr OCTET STRING, opticsIMaclMacAceSourceIPV4AddrBitmask OCTET STRING, opticsIMaclMacAceDestIPV4Addr OCTET STRING, opticsIMaclMacAceDestIPV4AddrBitmask OCTET STRING, opticsIMaclMacAceIpDscp OpticsIMETSIpDscp, opticsIMaclMacAceIpDscpRange Gauge, opticsIMaclMacAceIpDscpBitMask OCTET STRING, -- BEGIN OPTnm00305 opticsIMaclMacAceSourceTcpPort Unsigned32, opticsIMaclMacAceMaxSourceTcpPort Unsigned32, opticsIMaclMacAceDestTcpPort Unsigned32, opticsIMaclMacAceMaxDestTcpPort Unsigned32, opticsIMaclMacAceSourceUdpPort Unsigned32, opticsIMaclMacAceMaxSourceUdpPort Unsigned32, opticsIMaclMacAceDestUdpPort Unsigned32, opticsIMaclMacAceMaxDestUdpPort Unsigned32, opticsIMaclMacAceSourceIPV6Addr OCTET STRING, opticsIMaclMacAceSourceIPV6AddrBitmask OCTET STRING, opticsIMaclMacAceDestIPV6Addr OCTET STRING, opticsIMaclMacAceDestIPV6AddrBitmask OCTET STRING, -- END OPTnm00305 -- BEGIN OPTnm02748 opticsIMaclMacAceProtocolId Unsigned32 -- END OPTnm02748 } opticsIMaclMacAceIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The unique index of an ACE within an ACL" ::= { opticsIMaclMacAceEntry 1} opticsIMaclMacAceOrder OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the order of execution of ACE within an ACL" ::= { opticsIMaclMacAceEntry 2 } opticsIMaclMacAceAction OBJECT-TYPE SYNTAX INTEGER { permit (1), deny (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The action to be executed, if the condition of the ace is verified" ::= { opticsIMaclMacAceEntry 3 } opticsIMaclMacAceSourceMacAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6)) MAX-ACCESS read-create STATUS current DESCRIPTION "It indicates the 48 bits source MAC address. The specified source mac of the packet. The packet's source mac address is AND-ed with the value of aceMacSourceMacAddrBitmask and then compared against the value of this object." ::= { opticsIMaclMacAceEntry 4 } opticsIMaclMacAceSourceMacAddrBitmask OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6)) MAX-ACCESS read-create STATUS current DESCRIPTION "The specified source mac address mask. If it is not configured, the default value is all 1 " ::= { opticsIMaclMacAceEntry 5 } opticsIMaclMacAceDestMacAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6)) MAX-ACCESS read-create STATUS current DESCRIPTION "It indicates the 48 bits destination MAC address. The specified destination mac of the packet The packet's destination mac address is AND-ed with the value of aceMacDestMacAddrBitmask and then compared against the value of this object." ::= { opticsIMaclMacAceEntry 6 } opticsIMaclMacAceDestMacAddrBitmask OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6)) MAX-ACCESS read-create STATUS current DESCRIPTION "The specified destination mac address mask. If it is not configured, the default value is all 1 " ::= { opticsIMaclMacAceEntry 7 } opticsIMaclMacAceVid OBJECT-TYPE SYNTAX OpticsIMETSVlanCfg MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the 12 bits of the VLAN Identifier value." ::= { opticsIMaclMacAceEntry 8 } opticsIMaclMacAceVidRange OBJECT-TYPE SYNTAX Gauge32 (0..4095) MAX-ACCESS read-create STATUS current DESCRIPTION "The specified VLAN Identifier offset. The packet's VLAN Identifier has to be included between aclMacAceVid and this value plus aclMacAceVidRange; if VLAN Identifier range is not configured, 0 is the value of this object." ::= { opticsIMaclMacAceEntry 9 } opticsIMaclMacAceEtherType OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the 16 bits of the EtherType value." ::= { opticsIMaclMacAceEntry 10 } opticsIMaclMacAceEtherTypeRange OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The specified EthernetType offset: the packet's Ethertype has to be included between aclMacEhtertype and this value plus aclMacAceEtherTypeRange; if the Ethertype range is not configured, 0 is the value of this object." ::= { opticsIMaclMacAceEntry 11 } opticsIMaclMacAceStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this mac ACE conceptual row entry. This object is used to manage creation, deletion and modification of rows in this table. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Once a row becomes active, value in any other column within such row cannot be modified." ::= { opticsIMaclMacAceEntry 12 } opticsIMaclMacAceVidBitmask OBJECT-TYPE SYNTAX OCTET STRING (SIZE (2)) MAX-ACCESS read-create STATUS current DESCRIPTION "The specified Vid mask. If it is not configured, the default value is all 1 " ::= { opticsIMaclMacAceEntry 13 } opticsIMaclMacAceEtherTypeBitmask OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) MAX-ACCESS read-create STATUS current DESCRIPTION "The specified EtherType mask. If it is not configured, the default value is all 1 " ::= { opticsIMaclMacAceEntry 14 } opticsIMaclMacAcePriority OBJECT-TYPE SYNTAX INTEGER { pri000 (0), pri001 (1), pri010 (2), pri011 (3), pri100 (4), pri101 (5), pri110 (6), pri111 (7) } MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the 8 bits of the 802.1p priority bits value. The specified 802.1p priority bits value of the packet. The packet's 802.1p priority bits value is AND-ed with the value of opticsIMaclMacAcePriorityBitMask and then compared against the value of this object." ::= { opticsIMaclMacAceEntry 15 } opticsIMaclMacAcePriorityBitMask OBJECT-TYPE SYNTAX OCTET STRING (SIZE (2)) MAX-ACCESS read-create STATUS current DESCRIPTION "The specified 802.1p Priority mask. If it is not configured, the default value is all 1 " ::= { opticsIMaclMacAceEntry 16 } opticsIMaclMacAceSourceIPV4Addr OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) MAX-ACCESS read-write STATUS current DESCRIPTION "It indicates the 32 bits source IP address. The specified source IP of the packet is AND-ed with the value of opticsIMaclMacAceSourceIPV4AddrBitmask and then compared against the value of this object." ::= { opticsIMaclMacAceEntry 17 } opticsIMaclMacAceSourceIPV4AddrBitmask OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) MAX-ACCESS read-write STATUS current DESCRIPTION "The specified source IPv4 address mask. If it is not configured, the default value is all 1." ::= { opticsIMaclMacAceEntry 18 } opticsIMaclMacAceDestIPV4Addr OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) MAX-ACCESS read-write STATUS current DESCRIPTION "It indicates the 32 bits destination IPv4 address. The specified destination IPv4 address is AND-ed with the value of opticsIMaclMacAceDestIPV4AddrBitmask and then compared against the value of this object." ::= { opticsIMaclMacAceEntry 19 } opticsIMaclMacAceDestIPV4AddrBitmask OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) MAX-ACCESS read-write STATUS current DESCRIPTION "The specified destination IPv4 address mask. If it is not configured, the default value is all 1." ::= { opticsIMaclMacAceEntry 20 } opticsIMaclMacAceIpDscp OBJECT-TYPE SYNTAX OpticsIMETSIpDscp MAX-ACCESS read-write STATUS current DESCRIPTION "It indicates IP DSCP value" ::= { opticsIMaclMacAceEntry 21 } opticsIMaclMacAceIpDscpRange OBJECT-TYPE SYNTAX Gauge (0..63) MAX-ACCESS read-write STATUS current DESCRIPTION "The specified DSCP Identifier offset. The packet's DSCP has to be included between aclMacAceIpDscp and this value plus aclMacAceIpDscpRange; if IP DSCP range is not configured, 0 is the value of this object." ::= { opticsIMaclMacAceEntry 22 } opticsIMaclMacAceIpDscpBitMask OBJECT-TYPE SYNTAX OCTET STRING (SIZE (2)) MAX-ACCESS read-write STATUS current DESCRIPTION "The specified DSCP mask. If it is not configured, the default value is all 1" ::= { opticsIMaclMacAceEntry 23 } -- BEGIN OPTnm00305 opticsIMaclMacAceSourceTcpPort OBJECT-TYPE SYNTAX Unsigned32 (0..65537) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the Source TCP Port value.The default value is 65537(don't care)" ::= { opticsIMaclMacAceEntry 24 } opticsIMaclMacAceMaxSourceTcpPort OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the max value of Source TCP Port. Default value:0." ::= { opticsIMaclMacAceEntry 25 } opticsIMaclMacAceDestTcpPort OBJECT-TYPE SYNTAX Unsigned32 (0..65537) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the Dest TCP Port value.The default value is 65537(don't care)" ::= { opticsIMaclMacAceEntry 26 } opticsIMaclMacAceMaxDestTcpPort OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the max value of Dest TCP Port. Default value:0." ::= { opticsIMaclMacAceEntry 27 } opticsIMaclMacAceSourceUdpPort OBJECT-TYPE SYNTAX Unsigned32 (0..65537) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the Source UDP Port value.The default value is 65537(don't care)" ::= { opticsIMaclMacAceEntry 28 } opticsIMaclMacAceMaxSourceUdpPort OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the max value of Source UDP Port. Default value:0." ::= { opticsIMaclMacAceEntry 29 } opticsIMaclMacAceDestUdpPort OBJECT-TYPE SYNTAX Unsigned32 (0..65537) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the Dest UDP Port value.The default value is 65537(don't care)" ::= { opticsIMaclMacAceEntry 30 } opticsIMaclMacAceMaxDestUdpPort OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the max value of Dest UDP Port. Default value:0." ::= { opticsIMaclMacAceEntry 31 } opticsIMaclMacAceSourceIPV6Addr OBJECT-TYPE SYNTAX OCTET STRING (SIZE (16)) MAX-ACCESS read-write STATUS current DESCRIPTION "It indicates the 128 bits source IPV6 address. The specified source IP of the packet is AND-ed with the value of opticsIMaclMacAceSourceIPV6AddrBitmask and then compared against the value of this object." ::= { opticsIMaclMacAceEntry 32 } opticsIMaclMacAceSourceIPV6AddrBitmask OBJECT-TYPE SYNTAX OCTET STRING (SIZE (16)) MAX-ACCESS read-write STATUS current DESCRIPTION "The specified source IPv6 address mask. If it is not configured, the default value is all 1." ::= { opticsIMaclMacAceEntry 33 } opticsIMaclMacAceDestIPV6Addr OBJECT-TYPE SYNTAX OCTET STRING (SIZE (16)) MAX-ACCESS read-write STATUS current DESCRIPTION "It indicates the 128 bits destination IPv6 address. The specified destination IPv6 address is AND-ed with the value of opticsIMaclMacAceDestIPV6AddrBitmask and then compared against the value of this object." ::= { opticsIMaclMacAceEntry 34 } opticsIMaclMacAceDestIPV6AddrBitmask OBJECT-TYPE SYNTAX OCTET STRING (SIZE (16)) MAX-ACCESS read-write STATUS current DESCRIPTION "The specified destination IPv6 address mask. If it is not configured, the default value is all 1." ::= { opticsIMaclMacAceEntry 35 } -- END OPTnm00305 -- BEGIN OPTnm02748 opticsIMaclMacAceProtocolId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "8 bits Protocol Identifier value in IPV4 Header (or 8 bits Next Header value in IPv6 Header). Default value:255" ::= { opticsIMaclMacAceEntry 36 } -- END OPTnm02748 -- End opticsIMaclMacAceTable -- Start opticsIMaclActualMacAceTable opticsIMaclActualMacAceTable OBJECT-TYPE SYNTAX SEQUENCE OF OpticsIMAclActualMacAceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual read-only table of all of aclMacAceEntry " ::= { opticsimEthNEMibObject 10 } opticsIMAclActualMacAceEntry OBJECT-TYPE SYNTAX OpticsIMAclActualMacAceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual read-only row for aclMacAceTable." INDEX { opticsIMaclIndex, opticsIMAclActualMacAceIndex } ::= { opticsIMaclActualMacAceTable 1 } OpticsIMAclActualMacAceEntry ::= SEQUENCE { opticsIMAclActualMacAceIndex Integer32, opticsIMAclActualMacAceOrder Integer32, opticsIMAclActualMacAceAction INTEGER, opticsIMAclActualMacAceSourceMacAddr OCTET STRING, opticsIMAclActualMacAceSourceMacAddrBitmask OCTET STRING, opticsIMAclActualMacAceDestMacAddr OCTET STRING, opticsIMAclActualMacAceDestMacAddrBitmask OCTET STRING, opticsIMAclActualMacAceVid OpticsIMETSVlanCfg, opticsIMAclActualMacAceVidRange Gauge32, opticsIMAclActualMacAceEtherType Unsigned32, opticsIMAclActualMacAceEtherTypeRange Unsigned32, opticsIMaclActualMacAceVidBitmask OCTET STRING, opticsIMaclActualMacAceEtherTypeBitmask OCTET STRING, opticsIMaclActualMacAcePriority INTEGER, opticsIMaclActualMacAcePriorityBitMask OCTET STRING, opticsIMaclActualMacAceSourceIPV4Addr OCTET STRING, opticsIMaclActualMacAceSourceIPV4AddrBitmask OCTET STRING, opticsIMaclActualMacAceDestIPV4Addr OCTET STRING, opticsIMaclActualMacAceDestIPV4AddrBitmask OCTET STRING, opticsIMaclActualMacAceIpDscp OpticsIMETSIpDscp, opticsIMaclActualMacAceIpDscpRange Gauge, opticsIMaclActualMacAceIpDscpBitMask OCTET STRING, -- BEGIN OPTnm00305 opticsIMaclActualMacAceSourceTcpPort Unsigned32, opticsIMaclActualMacAceMaxSourceTcpPort Unsigned32, opticsIMaclActualMacAceDestTcpPort Unsigned32, opticsIMaclActualMacAceMaxDestTcpPort Unsigned32, opticsIMaclActualMacAceSourceUdpPort Unsigned32, opticsIMaclActualMacAceMaxSourceUdpPort Unsigned32, opticsIMaclActualMacAceDestUdpPort Unsigned32, opticsIMaclActualMacAceMaxDestUdpPort Unsigned32, opticsIMaclActualMacAceSourceIPV6Addr OCTET STRING, opticsIMaclActualMacAceSourceIPV6AddrBitmask OCTET STRING, opticsIMaclActualMacAceDestIPV6Addr OCTET STRING, opticsIMaclActualMacAceDestIPV6AddrBitmask OCTET STRING, -- END OPTnm00305 -- BEGIN OPTnm02748 opticsIMAclActualMacAceProtocolId Unsigned32 -- END OPTnm02748 } opticsIMAclActualMacAceIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The unique index of an ACE within an ACL" ::= { opticsIMAclActualMacAceEntry 1 } opticsIMAclActualMacAceOrder OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the order of execution of ACE within an ACL" ::= { opticsIMAclActualMacAceEntry 2 } opticsIMAclActualMacAceAction OBJECT-TYPE SYNTAX INTEGER { permit(1), deny(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The action to be executed, if the condition of the ace is verified" ::= { opticsIMAclActualMacAceEntry 3 } opticsIMAclActualMacAceSourceMacAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6)) MAX-ACCESS read-only STATUS current DESCRIPTION "It indicates the 48 bits source MAC address. The specified source mac of the packet The packet's source mac address is AND-ed with the value of aceMacSourceMacAddrBitmask and then compared against the value of this object." ::= { opticsIMAclActualMacAceEntry 4 } opticsIMAclActualMacAceSourceMacAddrBitmask OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6)) MAX-ACCESS read-only STATUS current DESCRIPTION "The specified source mac address mask. If it is not configured, the default value is all 1 " ::= { opticsIMAclActualMacAceEntry 5 } opticsIMAclActualMacAceDestMacAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6)) MAX-ACCESS read-only STATUS current DESCRIPTION "It indicates the 48 bits destination MAC address. The specified destination mac of the packet The packet's destination mac address is AND-ed with the value of aceMacDestMacAddrBitmask and then compared against the value of this object." ::= { opticsIMAclActualMacAceEntry 6 } opticsIMAclActualMacAceDestMacAddrBitmask OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6)) MAX-ACCESS read-only STATUS current DESCRIPTION "The specified destination mac address mask. If it is not configured, the default value is all 1 " ::= { opticsIMAclActualMacAceEntry 7 } opticsIMAclActualMacAceVid OBJECT-TYPE SYNTAX OpticsIMETSVlanCfg MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the 12 bits of the VLAN Identifier value." ::= { opticsIMAclActualMacAceEntry 8 } opticsIMAclActualMacAceVidRange OBJECT-TYPE SYNTAX Gauge32 (0..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "The specified VLAN Identifier offset. The packet's VLAN Identifier has to be included between aclMacAceVid and this value plus aclMacAceVidRange; if VLAN Identifier range is not configured, 0 is the value of this object." ::= { opticsIMAclActualMacAceEntry 9 } opticsIMAclActualMacAceEtherType OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the 16 bits of the EtherType value." ::= { opticsIMAclActualMacAceEntry 10 } opticsIMAclActualMacAceEtherTypeRange OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The specified EthernetType offset: the packet's Ethertype has to be included between aclMacEhtertype and this value plus aclMacAceEtherTypeRange; if the Ethertype range is not configured, 0 is the value of this object." ::= { opticsIMAclActualMacAceEntry 11 } opticsIMaclActualMacAceVidBitmask OBJECT-TYPE SYNTAX OCTET STRING (SIZE (2)) MAX-ACCESS read-only STATUS current DESCRIPTION "The specified Vid mask" ::= { opticsIMAclActualMacAceEntry 12 } opticsIMaclActualMacAceEtherTypeBitmask OBJECT-TYPE SYNTAX OCTET STRING (SIZE (2)) MAX-ACCESS read-only STATUS current DESCRIPTION "The specified EtherType mask." ::= { opticsIMAclActualMacAceEntry 13 } opticsIMaclActualMacAcePriority OBJECT-TYPE SYNTAX INTEGER { pri000 (0), pri001 (1), pri010 (2), pri011 (3), pri100 (4), pri101 (5), pri110 (6), pri111 (7) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the 8 bits of the 802.1p priority bits value. The specified 802.1p priority bits value of the packet. The packet's 802.1p priority bits value is AND-ed with the value of opticsIMaclMacAcePriorityBitMask and then compared against the value of this object." ::= { opticsIMAclActualMacAceEntry 14 } opticsIMaclActualMacAcePriorityBitMask OBJECT-TYPE SYNTAX OCTET STRING (SIZE (2)) MAX-ACCESS read-only STATUS current DESCRIPTION "The specified 802.1p Priority mask. If it is not configured, the default value is all 1 " ::= { opticsIMAclActualMacAceEntry 15 } opticsIMaclActualMacAceSourceIPV4Addr OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) MAX-ACCESS read-only STATUS current DESCRIPTION "It indicates the 32 bits source IP address." ::= { opticsIMAclActualMacAceEntry 16 } opticsIMaclActualMacAceSourceIPV4AddrBitmask OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) MAX-ACCESS read-only STATUS current DESCRIPTION "The specified source IPv4 address mask." ::= { opticsIMAclActualMacAceEntry 17 } opticsIMaclActualMacAceDestIPV4Addr OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) MAX-ACCESS read-only STATUS current DESCRIPTION "It indicates the 32 bits destination IPv4 address." ::= { opticsIMAclActualMacAceEntry 18 } opticsIMaclActualMacAceDestIPV4AddrBitmask OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) MAX-ACCESS read-only STATUS current DESCRIPTION "The specified destination IPv4 address mask." ::= { opticsIMAclActualMacAceEntry 19 } opticsIMaclActualMacAceIpDscp OBJECT-TYPE SYNTAX OpticsIMETSIpDscp MAX-ACCESS read-only STATUS current DESCRIPTION "It indicates IP DSCP value" ::= { opticsIMAclActualMacAceEntry 20 } opticsIMaclActualMacAceIpDscpRange OBJECT-TYPE SYNTAX Gauge (0..63) MAX-ACCESS read-only STATUS current DESCRIPTION "The specified DSCP Identifier offset." ::= { opticsIMAclActualMacAceEntry 21 } opticsIMaclActualMacAceIpDscpBitMask OBJECT-TYPE SYNTAX OCTET STRING (SIZE (2)) MAX-ACCESS read-only STATUS current DESCRIPTION "The specified DSCP mask." ::= { opticsIMAclActualMacAceEntry 22 } -- BEGIN OPTnm00305 opticsIMaclActualMacAceSourceTcpPort OBJECT-TYPE SYNTAX Unsigned32 (0..65537) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the Source TCP Port value." ::= { opticsIMAclActualMacAceEntry 23 } opticsIMaclActualMacAceMaxSourceTcpPort OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the max value of Source TCP Port." ::= { opticsIMAclActualMacAceEntry 24 } opticsIMaclActualMacAceDestTcpPort OBJECT-TYPE SYNTAX Unsigned32 (0..65537) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the Dest TCP Port value." ::= { opticsIMAclActualMacAceEntry 25 } opticsIMaclActualMacAceMaxDestTcpPort OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the max value of Dest TCP Port." ::= { opticsIMAclActualMacAceEntry 26 } opticsIMaclActualMacAceSourceUdpPort OBJECT-TYPE SYNTAX Unsigned32 (0..65537) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the Source UDP Port value." ::= { opticsIMAclActualMacAceEntry 27 } opticsIMaclActualMacAceMaxSourceUdpPort OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the max value of Source UDP Port" ::= { opticsIMAclActualMacAceEntry 28 } opticsIMaclActualMacAceDestUdpPort OBJECT-TYPE SYNTAX Unsigned32 (0..65537) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the Dest UDP Port value." ::= { opticsIMAclActualMacAceEntry 29 } opticsIMaclActualMacAceMaxDestUdpPort OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the max value of Dest UDP Port" ::= { opticsIMAclActualMacAceEntry 30 } opticsIMaclActualMacAceSourceIPV6Addr OBJECT-TYPE SYNTAX OCTET STRING (SIZE (16)) MAX-ACCESS read-only STATUS current DESCRIPTION "It indicates the 128 bits source IPV6 address. The specified source IP of the packet is AND-ed with the value of opticsIMaclMacAceSourceIPV6AddrBitmask and then compared against the value of this object." ::= { opticsIMAclActualMacAceEntry 31 } opticsIMaclActualMacAceSourceIPV6AddrBitmask OBJECT-TYPE SYNTAX OCTET STRING (SIZE (16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The specified source IPv6 address mask." ::= { opticsIMAclActualMacAceEntry 32 } opticsIMaclActualMacAceDestIPV6Addr OBJECT-TYPE SYNTAX OCTET STRING (SIZE (16)) MAX-ACCESS read-only STATUS current DESCRIPTION "It indicates the 128 bits destination IPv6 address. The specified destination IPv6 address is AND-ed with the value of opticsIMaclMacAceDestIPV6AddrBitmask and then compared against the value of this object." ::= { opticsIMAclActualMacAceEntry 33 } opticsIMaclActualMacAceDestIPV6AddrBitmask OBJECT-TYPE SYNTAX OCTET STRING (SIZE (16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The specified destination IPv6 address mask." ::= { opticsIMAclActualMacAceEntry 34 } -- END OPTnm00305 -- BEGIN OPTnm02748 opticsIMAclActualMacAceProtocolId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates 8 bits Protocol Identifier value in IPV4 Header (or 8 bits Next Header value in IPv6 Header)" ::= { opticsIMAclActualMacAceEntry 35 } -- END OPTnm02748 -- End opticsIMAclActualMacAceTable -- OPTICSIM-ETHNE-MC DEFINITIONS ::= BEGIN -- IMPORTS -- MODULE-IDENTITY, OBJECT-TYPE FROM SNMPv2-SMI -- MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP FROM SNMPv2-CONF -- opticsimMib, opticsimIpMC FROM OPTICSIM-IPREG-MIB; -- opticsimEthNEMCCompl -- opticsimEthNEMCCompl MODULE-IDENTITY -- LAST-UPDATED "200211280000Z" -- ORGANIZATION "Alcatel Optics" -- CONTACT-INFO "Alcatel Optics" -- DESCRIPTION -- "Initial Release OPTICS-IM Ethernet NE MODULE COMPLIANCE" -- ::= { tsdimSnmpNEMCConf 1 } opticsimEthNEMCConf OBJECT IDENTIFIER ::= { opticsimEthMC 2 } opticsimEthNEMCCompl OBJECT IDENTIFIER ::= { opticsimEthNEMCConf 1 } opticsimEthNEMCGroup OBJECT IDENTIFIER ::= { opticsimEthNEMCConf 2 } END