TERACOM-TCW242-MIB DEFINITIONS ::= BEGIN

IMPORTS
        MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, enterprises, IpAddress, Integer32, Unsigned32, Counter32, snmpModules 		
															FROM SNMPv2-SMI
	DateAndTime, MacAddress, DisplayString					FROM SNMPv2-TC
	TEXTUAL-CONVENTION										FROM SNMPv2-TC
	MODULE-COMPLIANCE, OBJECT-GROUP , NOTIFICATION-GROUP            						
															FROM SNMPv2-CONF;
	
snmpMIB MODULE-IDENTITY
        LAST-UPDATED "202302070000Z"
	ORGANIZATION "TERACOM"
	CONTACT-INFO
			"EMail:	info@teracomsystems.com"
	DESCRIPTION
			"The MIB module for TCW242 SNMP entities."
	REVISION            "202302070000Z"
	DESCRIPTION
			"TCW242v1.4"
	::= { snmpModules 1 }

teracom								OBJECT IDENTIFIER ::=    { enterprises 38783 }
tcw242								OBJECT IDENTIFIER ::=    { teracom 8 }
trapNotifications					OBJECT IDENTIFIER ::=    { tcw242 0 }
product								OBJECT IDENTIFIER ::=    { tcw242 1 }
setup								OBJECT IDENTIFIER ::=    { tcw242 2 }
monitorNcontrol                     OBJECT IDENTIFIER ::=    { tcw242 3 }

tcw242MIBConformance				OBJECT IDENTIFIER ::=    { tcw242 4 }

tcw242MIBCompliances               OBJECT IDENTIFIER ::= { tcw242MIBConformance 1 }
tcw242MIBGroups    				OBJECT IDENTIFIER ::= { tcw242MIBConformance 2 }
	      
-- ======================================================
-- TEXTUAL-CONVENTIONS
-- ======================================================

RealValue ::= TEXTUAL-CONVENTION
      DISPLAY-HINT "d-3"
      STATUS    		current
      DESCRIPTION    "Real value x1000 in Integer format"
      SYNTAX        	Integer32
	      
      
DigitalValue ::= TEXTUAL-CONVENTION
      DISPLAY-HINT "d"
      STATUS    		current
      DESCRIPTION    "Digital value in Integer format"
      SYNTAX        	Unsigned32
			
AlarmLevel ::= TEXTUAL-CONVENTION
      STATUS              current
      DESCRIPTION    "Alarm Level"
      SYNTAX              INTEGER 
		{undefined(0), normal(1), indeterminate(2), warning(3), minor(4), major(5), critical(6)}
	
AlarmType ::= TEXTUAL-CONVENTION
      STATUS              current
      DESCRIPTION    "Alarm Type"
      SYNTAX              INTEGER 
		{warning(3), minor(4), major(5), critical(6)}
		
AnalogMode ::=    TEXTUAL-CONVENTION
      STATUS    		current
      DESCRIPTION    "Analog input mode"
      SYNTAX        	INTEGER
		{volt0to10(0),ma0to20(1)}
			
DigitalMode ::=    TEXTUAL-CONVENTION
      STATUS    		current
      DESCRIPTION    "Digital input mode"
      SYNTAX        	INTEGER
		{openclosed(0), risingEdge(1), fallingEdge(2), bothEdges(3)}
				
ChannelParameter1 ::= TEXTUAL-CONVENTION
      STATUS              current
      DESCRIPTION    "Channel parameter"
      SYNTAX              INTEGER 
		{none(0), s01(3), s02(4), s03(5), s04(6), s05(7), s06(8), s07(9), s08(10),
		 s09(11), s10(12), s11(13), s12(14), s13(15), s14(16), s15(17), s16(18), 
		 s17(19), s18(20), s19(21), s20(22), s21(23), s22(24), s23(25), s24(26),
		 a01(27), a02(28), a03(29), a04(30),
		 d01(31), d02(32), d03(33), d04(34)
		}
					
ChannelParameter2 ::= TEXTUAL-CONVENTION
      STATUS              current
      DESCRIPTION    "Channel parameter"
      SYNTAX              INTEGER 
		{none(0), one(1), null(2), s01(3), s02(4), s03(5), s04(6), s05(7), s06(8), s07(9), s08(10),
		 s09(11), s10(12), s11(13), s12(14), s13(15), s14(16), s15(17), s16(18), 
		 s17(19), s18(20), s19(21), s20(22), s21(23), s22(24), s23(25), s24(26),
		 a01(27), a02(28), a03(29), a04(30), a05(31), a06(32),
		 d01(33), d02(34), d03(35), d04(36)
		}
		
ChannelOperand ::=    TEXTUAL-CONVENTION
      STATUS    		current
      DESCRIPTION    "Channel operand"
      SYNTAX        	INTEGER
		{none(0), multiplication(1), division(2), sum(3), subtract(4)}
		
AlarmCondOperand ::=    TEXTUAL-CONVENTION
      STATUS    		current
      DESCRIPTION    "Alarm condition operand"
      SYNTAX        	INTEGER
		{larger(1), less(2)}
		
AlarmChannel ::= TEXTUAL-CONVENTION
      STATUS              current
      DESCRIPTION    "Alarm Channel"
      SYNTAX              INTEGER 
		{none(0), v01(1), v02(2), v03(3), v04(4), v05(5), v06(6), v07(7), v08(8),
		 v09(9), v10(10), v11(11), v12(12), v13(13), v14(14), v15(15), v16(16),
		 v17(17), v18(18), v19(19), v20(20), v21(21), v22(22), v23(23), v24(24)
		}
		
AlarmCondLogic ::=    TEXTUAL-CONVENTION
      STATUS    		current
      DESCRIPTION    "Alarm condition logic"
      SYNTAX        	INTEGER
		{none(0), and(1), or(2)}
		
AlarmActionDelay ::= TEXTUAL-CONVENTION
      DISPLAY-HINT "d"
      STATUS    		current
      DESCRIPTION    "Action delay in Integer format"
      SYNTAX        	Integer32
	      
AlarmActionOnReturn ::= TEXTUAL-CONVENTION
      STATUS              current
      DESCRIPTION    "Alarm action on return"
      SYNTAX              INTEGER 
		{no(0), yes(1)}
	      
AlarmAction ::= TEXTUAL-CONVENTION
      STATUS              current
      DESCRIPTION    "Alarm action"
      SYNTAX              INTEGER 
		{none(0), trapcond1(1), trapcond2(2), trapcond1and2(3), postiostate(4), mail(5)}
		
DigInputDelay ::= TEXTUAL-CONVENTION
      DISPLAY-HINT "d"
      STATUS    		current
      DESCRIPTION    "Digital input delay in Integer format"
      SYNTAX        	Integer32(0..60000)
	    		
RELAYPULSEWIDTH ::= TEXTUAL-CONVENTION
      DISPLAY-HINT "d"
      STATUS    		current
      DESCRIPTION    "Relay Pulse x100ms"
      SYNTAX        	Integer32
	  
RELAYACTIVATION ::=  TEXTUAL-CONVENTION
    STATUS  current
    DESCRIPTION
        "Relay activation logic"
    SYNTAX    INTEGER
 		{ webHttpApi(0), al01(1), al02(2), al03(3), al04(4), al05(5), al06(6), al07(7), 
		al08(8), al09(9), al10(10), al11(11),  al12(12),  al13(13), al14(14), al15(15),
		al16(16), al17(17), al18(18), al19(19), al20(20), al21(21), al22(22), al23(23), al24(24),
		anyAlarm(25), schedule1(26), schedule2(27), schedule3(28), schedule4(29),
		func1(30), func2(31), func3(32), func4(33)}
		
RELAYACTION ::= TEXTUAL-CONVENTION
   STATUS       current
   DESCRIPTION  "Relay action on alarm"
   SYNTAX       INTEGER 
		{on(0), pulse(2)}   
		
RELAYSTATUS::= TEXTUAL-CONVENTION
   STATUS       current
   DESCRIPTION  "Relay status"
   SYNTAX       INTEGER 
		{off(0), on(1)}

RELAYPULSES::= TEXTUAL-CONVENTION
   STATUS       current
   DESCRIPTION  "Relay pulse"
   SYNTAX       INTEGER 
		{off(0), on(1)} 	
		
FUNCSTATUS ::=  TEXTUAL-CONVENTION
       STATUS  current
       DESCRIPTION
           "Function status"
       SYNTAX    INTEGER
 			{false(0), true(1)}	

FUNCALARMSTATUS ::=  TEXTUAL-CONVENTION
       STATUS  current
       DESCRIPTION
           "function alarm status"
       SYNTAX    INTEGER
 			{normal(0), alarm(1)}				

RelayStateAfterRestart::= TEXTUAL-CONVENTION
   STATUS       current
   DESCRIPTION  "Relay state after restart"
   SYNTAX       INTEGER 
		{off(0), on(1), laststate(2)}   		
	      
ChannelType ::= TEXTUAL-CONVENTION
      STATUS              current
      DESCRIPTION    "Channel type"
      SYNTAX              INTEGER 
		{general(0), discrete(2), counter(3)}
      
DiscreteAlarmState ::= TEXTUAL-CONVENTION
      STATUS              current
      DESCRIPTION    "Discrete Alarm state"
      SYNTAX              INTEGER 
		{open(0), closed(1)}
		
MbSenTableIndex ::= TEXTUAL-CONVENTION
      DISPLAY-HINT	"d"
      STATUS        current
      DESCRIPTION   "Index of modbus rtu table"
      SYNTAX		Integer32 (1..24)
		
AnalogInpTableIndex ::= TEXTUAL-CONVENTION
      DISPLAY-HINT	"d"
      STATUS        current
	  DESCRIPTION   "Index of analog inputs table"
      SYNTAX		Integer32 (1..6)
		

DigInpTableIndex ::= TEXTUAL-CONVENTION
      DISPLAY-HINT	"d"
      STATUS        current
	  DESCRIPTION   "Index of digital inputs table"
      SYNTAX		Integer32 (1..4)
	  
RelayTableIndex ::= TEXTUAL-CONVENTION
      DISPLAY-HINT	"d"
      STATUS        current
	  DESCRIPTION   "Index of relays table"
      SYNTAX		Integer32 (1..4)
		
ChTableIndex ::= TEXTUAL-CONVENTION
      DISPLAY-HINT	"d"
      STATUS        current
	  DESCRIPTION   "Index of channels table"
      SYNTAX		Integer32 (1..24)
		
AlTableIndex ::= TEXTUAL-CONVENTION
      DISPLAY-HINT	"d"
      STATUS        current
	  DESCRIPTION   "Index of alarms table"
      SYNTAX		Integer32 (1..24)
	  
FuncTableIndex ::= TEXTUAL-CONVENTION
      DISPLAY-HINT	"d"
      STATUS        current
	  DESCRIPTION   "Index of function table"
      SYNTAX		Integer32 (1..4)

-- ======================================================
-- Device settings
-- ======================================================

name        OBJECT-TYPE
      SYNTAX DisplayString
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
            "Name of product"
      ::= { product 1 }
      
version        OBJECT-TYPE
      SYNTAX DisplayString
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
            "Version string"
      ::= { product 2 }
      
dateTime        OBJECT-TYPE
      SYNTAX DateAndTime
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
            "Date and time"
      ::= { product 3 }

-- ======================================================
-- Network settings
-- ======================================================

network                                                          	OBJECT IDENTIFIER ::=    { setup 1 }

deviceID OBJECT-TYPE
        SYNTAX    MacAddress
        MAX-ACCESS    read-only
        STATUS current
        DESCRIPTION
                "Device ID is Default MAC Address"
        ::= { network 1 }
	
hostName    OBJECT-TYPE
        SYNTAX    DisplayString (SIZE (0..38))
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
                "Host Name"
        ::= { network 2 }
	
deviceIP OBJECT-TYPE
        SYNTAX    IpAddress
        MAX-ACCESS    read-only
        STATUS current
        DESCRIPTION
                "Device IP Address"
        ::= { network 3 }
	
-- ======================================================
-- Parameters
-- ======================================================

parameters                                                    OBJECT IDENTIFIER ::=    { setup 2 }

-- ======================================================
-- Modbus rtu sensors
-- ======================================================

mbSensors                                            			OBJECT IDENTIFIER ::=    { parameters 1 }

mbSensorsTable OBJECT-TYPE
        SYNTAX SEQUENCE OF MbSensorsEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
                "Table containing modbus rtu parameters."
          ::= { mbSensors 1 }

mbSensorsEntry OBJECT-TYPE
        SYNTAX MbSensorsEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
                "Entry containing modbus rtu parameters."
        INDEX { mbSenIndex }
          ::= { mbSensorsTable 1 }

MbSensorsEntry ::=
        SEQUENCE {
		mbSenIndex
			MbSenTableIndex,
		mbSenDescription
			DisplayString,
		mbSenMult
			RealValue,
		mbSenOffset
			RealValue,
		mbSenVal
			RealValue,
		mbSenCounter
			Counter32
        }

mbSenIndex    OBJECT-TYPE
        SYNTAX MbSenTableIndex
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
                "Index of modbus rtu table"
        ::= { mbSensorsEntry 1 }
	
mbSenDescription    OBJECT-TYPE
        SYNTAX    DisplayString (SIZE (0..15))
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
                "Sensor description"
        ::= { mbSensorsEntry 2 }
	
mbSenMult OBJECT-TYPE
	SYNTAX RealValue
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
		"Sensor multiplier x1000 in Integer format"
	::= { mbSensorsEntry 3 }
		
mbSenOffset OBJECT-TYPE
	SYNTAX RealValue
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
		"Sensor offset x1000 in Integer format"
	::= { mbSensorsEntry 4 }
		
mbSenVal OBJECT-TYPE
	SYNTAX RealValue
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
		"Sensor value x1000 in Integer format"
	::= { mbSensorsEntry 5 }
	
mbSenCounter OBJECT-TYPE
	SYNTAX Counter32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
		"Sensor as 32 bit Counter"
	::= { mbSensorsEntry 6 }

-- ======================================================
-- Analog inputs
-- ======================================================

analogInputs                                        OBJECT IDENTIFIER ::=    { parameters 2 }

analogInpTable OBJECT-TYPE
        SYNTAX SEQUENCE OF AnalogInpEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
                "Table containing analog inputs parameters."
          ::= { analogInputs 1 }

analogInpEntry OBJECT-TYPE
        SYNTAX AnalogInpEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
                "Entry containing analog inputs parameters."
        INDEX { analogInpIndex }
          ::= { analogInpTable 1 }

AnalogInpEntry ::=
        SEQUENCE {
		analogInpIndex
			AnalogInpTableIndex,
		analogInpDescription
			DisplayString,
		analogInpMult
			RealValue,
		analogInpOffset
			RealValue,
		analogInpMode
			AnalogMode,
		analogInpValue
			RealValue
        }

analogInpIndex    OBJECT-TYPE
        SYNTAX AnalogInpTableIndex
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
                "Index of analog inputs table"
        ::= { analogInpEntry 1 }

analogInpDescription    OBJECT-TYPE
        SYNTAX    DisplayString (SIZE (0..15))
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
                "Analog input description"
        ::= { analogInpEntry 2 }
	
analogInpMult OBJECT-TYPE
	SYNTAX RealValue
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
		"Analog input multiplier x1000 in Integer format"
	::= { analogInpEntry 3 }
	
analogInpOffset OBJECT-TYPE
	SYNTAX RealValue
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
		"Analog input offset x1000 in Integer format"
	::= { analogInpEntry 4 }
	
analogInpMode OBJECT-TYPE
        SYNTAX AnalogMode
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION 
                "Analog input mode - 0-10V or 4-20mA"
        ::= { analogInpEntry 5 }
	
analogInpValue OBJECT-TYPE
	SYNTAX RealValue
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
		"Analog input value x1000 in Integer format"
	::= { analogInpEntry 6 }

-- ======================================================
-- Digital inputs
-- ======================================================

digitalInputs                                      OBJECT IDENTIFIER ::=    { parameters 3 }

digitalInpTable OBJECT-TYPE
        SYNTAX SEQUENCE OF DigitalInpEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
                "Table containing digital inputs parameters."
          ::= { digitalInputs 1 }

digitalInpEntry OBJECT-TYPE
        SYNTAX DigitalInpEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
                "Entry containing digital inputs parameters."
        INDEX { digInpIndex }
          ::= { digitalInpTable 1 }

DigitalInpEntry ::=
        SEQUENCE {
		digInpIndex
			DigInpTableIndex,
		digInpDescription
			DisplayString,
		digInplowLevel
			DisplayString,
		digInphighLevel
			DisplayString,
		digInpMode
			DigitalMode,
		digInpCloseToOpenDelay
			DigInputDelay,
		digInpOpenToCloseDelay
			DigInputDelay,
		digInpCounterInitValue
			Unsigned32,
		digInpValue
			DigitalValue
        }

digInpIndex    OBJECT-TYPE
        SYNTAX DigInpTableIndex
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
                "Index of digital inputs table"
        ::= { digitalInpEntry 1 }

digInpDescription    OBJECT-TYPE
        SYNTAX    DisplayString (SIZE (0..15))
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
                "Digital Input description"
        ::= { digitalInpEntry 2 }
	
digInplowLevel    OBJECT-TYPE
        SYNTAX    DisplayString (SIZE (0..15))
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
                "Digital Input closed state"
        ::= { digitalInpEntry 3 }
	
digInphighLevel    OBJECT-TYPE
        SYNTAX    DisplayString (SIZE (0..15))
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
                "Digital Input open state"
        ::= { digitalInpEntry 4 }
	
digInpMode OBJECT-TYPE
        SYNTAX DigitalMode
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION 
                "Digital Input mode - Discrete or Counter"
        ::= { digitalInpEntry 5 }
	
digInpCloseToOpenDelay OBJECT-TYPE
	SYNTAX DigInputDelay
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
		"Close To Open delay"
	::= { digitalInpEntry 6 }
	
digInpOpenToCloseDelay OBJECT-TYPE
	SYNTAX DigInputDelay
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
		"Open To Close delay"
	::= { digitalInpEntry 7 }
	
digInpCounterInitValue OBJECT-TYPE
        SYNTAX Unsigned32
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION 
                "Counter initial value"
	::= { digitalInpEntry 8 }
	
digInpValue OBJECT-TYPE
	SYNTAX DigitalValue
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
		"Digital input value"
	::= { digitalInpEntry 9 }

-- ======================================================
-- Relay Setup
-- ======================================================
relaySetup                                      OBJECT IDENTIFIER ::=    { parameters 4 }

relOutSetupTable OBJECT-TYPE
        SYNTAX SEQUENCE OF RelOutSetupEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
                "Table containing relay setup parameters."
          ::= { relaySetup 1 }

relOutSetupEntry OBJECT-TYPE
        SYNTAX RelOutSetupEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
                "Entry containing relay setup parameters."
        INDEX { relOutSetupIndex }
          ::= { relOutSetupTable 1 }

RelOutSetupEntry ::=
        SEQUENCE {
		relOutSetupIndex
			RelayTableIndex,
		relOutDescription
			DisplayString,
		relOutPulseWidth
			RELAYPULSEWIDTH,
		relOutActivation
			RELAYACTIVATION,
		relOutAction
			RELAYACTION
        }
	
relOutSetupIndex    OBJECT-TYPE
    SYNTAX RelayTableIndex
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
            "Index of relay table"
    ::= { relOutSetupEntry 1 }
	
relOutDescription  OBJECT-TYPE
    SYNTAX  DisplayString (SIZE (0..15))
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Relay description"
    ::= { relOutSetupEntry 2 }
	
relOutPulseWidth  OBJECT-TYPE
    SYNTAX  RELAYPULSEWIDTH
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Relay Pulse x100ms"
    ::= { relOutSetupEntry 3 }	
	
relOutActivation  OBJECT-TYPE
    SYNTAX  RELAYACTIVATION
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Relay activated from"
    ::= { relOutSetupEntry 4 }
	
relOutAction  OBJECT-TYPE
    SYNTAX  RELAYACTION
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Relay action on alarm condition"
    ::= { relOutSetupEntry 5 }	
	
relOutAfterRst    OBJECT-TYPE
    SYNTAX RelayStateAfterRestart
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
            "Relay state after restart"
    ::= { relaySetup 2 }

-- ======================================================
-- Channels
-- ======================================================

channels	OBJECT IDENTIFIER ::=    { monitorNcontrol 1 }

chanTable OBJECT-TYPE
        SYNTAX SEQUENCE OF ChanEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
                "Table containing channels parameters."
          ::= { channels 1 }

chanEntry OBJECT-TYPE
        SYNTAX ChanEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
                "Entry containing channels parameters."
        INDEX { chIndex }
          ::= { chanTable 1 }

ChanEntry ::=
        SEQUENCE {
		chIndex
			ChTableIndex,
		chType
			ChannelType,
		chDescription
			DisplayString,
		chParam1
			ChannelParameter1,
		chOP1
			ChannelOperand,
		chParam2
			ChannelParameter2,
		chOP2
			ChannelOperand,
		chCoef1
			RealValue,
		chOP3
			ChannelOperand,
		chCoef2
			RealValue,
		chUnit
			DisplayString,
		chValue
			RealValue,
		chCounter
			Counter32,
		chAlarmStatus
			AlarmLevel
        }

chIndex    OBJECT-TYPE
        SYNTAX ChTableIndex
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
                "Index of channels table"
        ::= { chanEntry 1 }


chType OBJECT-TYPE
        SYNTAX ChannelType
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION 
                "Channel 1 type"
        ::= { chanEntry 2 }
	
chDescription    OBJECT-TYPE
        SYNTAX    DisplayString (SIZE (0..15))
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
                "Channel description"
        ::= { chanEntry 3 }
	
chParam1 OBJECT-TYPE
        SYNTAX ChannelParameter1
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION 
                "Channel parameter 1"
        ::= { chanEntry 4 }
	
chOP1 OBJECT-TYPE
        SYNTAX ChannelOperand
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION 
                "Channel operand 1"
        ::= { chanEntry 5 }
	
chParam2 OBJECT-TYPE
        SYNTAX ChannelParameter2
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION 
                "Channel parameter 2"
        ::= { chanEntry 6 }
	
chOP2 OBJECT-TYPE
        SYNTAX ChannelOperand
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION 
                "Channel operand 2"
        ::= { chanEntry 7 }
	
chCoef1 OBJECT-TYPE
        SYNTAX RealValue
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION 
                "Channel coefficient 1 x1000 in Integer format"
        ::= { chanEntry 8 }
	
chOP3 OBJECT-TYPE
        SYNTAX ChannelOperand
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION 
                "Channel operand 3"
        ::= { chanEntry 9 }
	
chCoef2 OBJECT-TYPE
        SYNTAX RealValue
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION 
                "Channel coefficient 2 x1000 in Integer format"
        ::= { chanEntry 10 }
	
chUnit    OBJECT-TYPE
        SYNTAX    DisplayString (SIZE (0..15))
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
                "Channel 1 unit"
        ::= { chanEntry 11 }
	
chValue OBJECT-TYPE
        SYNTAX RealValue
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION 
                "Channel value x1000 in Integer format"
        ::= { chanEntry 13 }
	
chCounter OBJECT-TYPE
        SYNTAX Counter32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION 
                "Channel as 32 bit counter"
        ::= { chanEntry 14 }
	
chAlarmStatus OBJECT-TYPE
        SYNTAX AlarmLevel
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION 
                "Channel alarm status"
        ::= { chanEntry 15 }
		
-- ======================================================
-- Relays
-- ======================================================
relays                                      OBJECT IDENTIFIER ::=    { monitorNcontrol 2 }

relOutTable OBJECT-TYPE
        SYNTAX SEQUENCE OF RelOutEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
                "Table containing monitor and control relays."
          ::= { relays 1 }

relOutEntry OBJECT-TYPE
        SYNTAX RelOutEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
                "Entry containing monitor and control relays."
        INDEX { relayIndex }
          ::= { relOutTable 1 }

RelOutEntry ::=
        SEQUENCE {
		relayIndex
			RelayTableIndex,
		relayState
			RELAYSTATUS,
		relayPulse	
			RELAYPULSES
        }
	
relayIndex    OBJECT-TYPE
    SYNTAX RelayTableIndex
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
            "Index of relay table"
    ::= { relOutEntry 1 }		
	
relayState OBJECT-TYPE
	SYNTAX RELAYSTATUS
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
		"Relay state"
	::= { relOutEntry 2 }
		
relayPulse OBJECT-TYPE
	SYNTAX RELAYPULSES
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
		"Relay pulse"
	::= { relOutEntry 3 }
		
-- ======================================================
-- Alarms
-- ======================================================

alarms	OBJECT IDENTIFIER ::=    { monitorNcontrol 3 }

alarmsTable OBJECT-TYPE
        SYNTAX SEQUENCE OF AlarmsEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
                "Table containing alarms parameters."
          ::= { alarms 1 }

alarmsEntry OBJECT-TYPE
        SYNTAX AlarmsEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
                "Entry containing alarms parameters."
        INDEX { alIndex }
          ::= { alarmsTable 1 }

AlarmsEntry ::=
        SEQUENCE {
		alIndex
			AlTableIndex,
		alDescription
			DisplayString,
		alCond1Channel
			AlarmChannel,
		alCond1Operand
			AlarmCondOperand,
		alCond1Limit
			RealValue,
		alCond1Hys
			RealValue,
		alCond1AlarmState
			DiscreteAlarmState,
		alCondLogic
			AlarmCondLogic,
		alCond2Channel
			AlarmChannel,
		alCond2Operand
			AlarmCondOperand,
		alCond2Limit
			RealValue,
		alCond2Hys
			RealValue,
		alCond2AlarmState
			DiscreteAlarmState,
		alType
			AlarmType,
		alAssigned
			AlarmChannel,
		alActionDelay
			AlarmActionDelay,
		alActionOnReturn
			AlarmActionOnReturn,
		alAction1
			AlarmAction,
		alAction2
			AlarmAction,
		alAction3
			AlarmAction,
		alStatus
			AlarmLevel
        }

alIndex    OBJECT-TYPE
        SYNTAX AlTableIndex
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
                "Index of alarms table"
        ::= { alarmsEntry 1 }

alDescription    OBJECT-TYPE
        SYNTAX    DisplayString (SIZE (0..15))
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
                "Alarm 1 description"
        ::= { alarmsEntry 2 }

alCond1Channel OBJECT-TYPE
        SYNTAX AlarmChannel
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION 
                "Alarm 1 condition 1 channel"
        ::= { alarmsEntry 3 }	

alCond1Operand OBJECT-TYPE
        SYNTAX AlarmCondOperand
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION 
                "Alarm 1 condition 1 operand"
        ::= { alarmsEntry 4 }
		
alCond1Limit OBJECT-TYPE
        SYNTAX RealValue
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION 
                "Alarm 1 condition 1 limit x1000 in Integer format"
        ::= { alarmsEntry 5 }
		
alCond1Hys OBJECT-TYPE
        SYNTAX RealValue
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION 
                "Alarm 1 condition 1 hysteresis x1000 in Integer format"
        ::= { alarmsEntry 6 }

alCond1AlarmState OBJECT-TYPE
        SYNTAX DiscreteAlarmState
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION 
                "Alarm 1 condition 1 discrete alarm state"
        ::= { alarmsEntry 7 }	
		
alCondLogic OBJECT-TYPE
        SYNTAX AlarmCondLogic
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION 
                "Alarm 1 conditions logic"
        ::= { alarmsEntry 8 }
		
alCond2Channel OBJECT-TYPE
        SYNTAX AlarmChannel
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION 
                "Alarm 1 condition 2 channel"
        ::= { alarmsEntry 9 }	
		
alCond2Operand OBJECT-TYPE
        SYNTAX AlarmCondOperand
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION 
                "Alarm 1 condition 2 operand"
        ::= { alarmsEntry 10 }
		
alCond2Limit OBJECT-TYPE
        SYNTAX RealValue
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION 
                "Alarm 1 condition 2 limit x1000 in Integer format"
        ::= { alarmsEntry 11 }
		
alCond2Hys OBJECT-TYPE
        SYNTAX RealValue
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION 
                "Alarm 1 condition 2 hysteresis x1000 in Integer format"
        ::= { alarmsEntry 12 }

alCond2AlarmState OBJECT-TYPE
        SYNTAX DiscreteAlarmState
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION 
                "Alarm 1 condition 2 discrete alarm state"
        ::= { alarmsEntry 13 }	
	
alType OBJECT-TYPE
        SYNTAX AlarmType
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION 
                "Alarm 1 type"
        ::= { alarmsEntry 14 }
	
alAssigned OBJECT-TYPE
        SYNTAX AlarmChannel
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION 
                "Alarm 1 assigned to"
        ::= { alarmsEntry 15 }
	
alActionDelay OBJECT-TYPE
        SYNTAX AlarmActionDelay
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION 
                "Alarm 1 action delay x1000 in Integer format"
        ::= { alarmsEntry 16 }
	
alActionOnReturn OBJECT-TYPE
        SYNTAX AlarmActionOnReturn
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION 
                "Alarm 1 action on return"
        ::= { alarmsEntry 17 }
	
alAction1 OBJECT-TYPE
        SYNTAX AlarmAction
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION 
                "Alarm 1 action 1"
        ::= { alarmsEntry 18 }
	
alAction2 OBJECT-TYPE
        SYNTAX AlarmAction
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION 
                "Alarm 1 action 2"
        ::= { alarmsEntry 19 }
	
alAction3 OBJECT-TYPE
        SYNTAX AlarmAction
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION 
                "Alarm 1 action 3"
        ::= { alarmsEntry 20 }
	
alStatus OBJECT-TYPE
        SYNTAX AlarmLevel
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION 
                "Alarm 1 status"
        ::= { alarmsEntry 21 }


	
--- configurationSaved
configurationSaved OBJECT-TYPE
	SYNTAX INTEGER { unsaved(0), saved(1) }
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
		"Configuration save status SAVED/UNSAVED"
	::= { monitorNcontrol 4 }

restartDevice OBJECT-TYPE
	SYNTAX INTEGER {    cancel(0), restart(1) }
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
		"Restart Device"
	::= { monitorNcontrol 5}
	
hardwareErr OBJECT-TYPE
	SYNTAX INTEGER {    noErr(0), hwErr(1) }
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
		"Hardware Error"
	::= { monitorNcontrol 6}
	
-- ======================================================
-- Functions
-- ======================================================
functions	OBJECT IDENTIFIER ::=    { monitorNcontrol 7 }

funcTable OBJECT-TYPE
        SYNTAX SEQUENCE OF FuncEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
                "Table containing functions."
          ::= { functions 1 }

funcEntry OBJECT-TYPE
        SYNTAX FuncEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
                "Entry containing monitor and control relays."
        INDEX { funcIndex }
          ::= { funcTable 1 }

FuncEntry ::=
        SEQUENCE {
		funcIndex
			FuncTableIndex,
		funcState
			FUNCSTATUS,
		funcAl	
			FUNCALARMSTATUS
        }
	
funcIndex    OBJECT-TYPE
    SYNTAX FuncTableIndex
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
            "Index of function table"
    ::= { funcEntry 1 }		
	
funcState OBJECT-TYPE
	SYNTAX FUNCSTATUS
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
		"Function state"
	::= { funcEntry 2 }
		
funcAl OBJECT-TYPE
	SYNTAX FUNCALARMSTATUS
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
		"Function alarm"
	::= { funcEntry 3 }

snmp-trap-notification NOTIFICATION-TYPE
	OBJECTS { chValue, chCounter, restartDevice, deviceIP, funcState, funcAl }
	STATUS current
	DESCRIPTION 
		"SMIV2 Trap notification information for the SNMP Manager."
	::= {trapNotifications 1}
	
tcw242MIBCompliances1 MODULE-COMPLIANCE
        STATUS    current
	DESCRIPTION
                        "This group is for SNMP applications."
        MODULE    -- this module
                MANDATORY-GROUPS { tcw242ProductGroup, tcw242SetupGroup, tcw242MonitorGroup, tcw242TrapGroup}

        ::= { tcw242MIBCompliances 1 }
	
tcw242ProductGroup OBJECT-GROUP
        OBJECTS {name, version, dateTime}
	STATUS    current
        DESCRIPTION
                        "A collection of objects providing basic product info."
        ::= { tcw242MIBGroups 1 }	
	
tcw242SetupGroup OBJECT-GROUP
        OBJECTS {	deviceID, hostName, deviceIP,
				mbSenDescription, mbSenMult, mbSenOffset, mbSenVal, mbSenCounter,
				analogInpDescription, analogInpMult, analogInpOffset, analogInpMode, analogInpValue,
				digInpDescription, digInplowLevel, digInphighLevel, digInpMode, digInpCloseToOpenDelay, digInpOpenToCloseDelay, digInpCounterInitValue, digInpValue,
				relOutDescription, relOutPulseWidth, relOutActivation, relOutAction, relOutAfterRst
			}
        STATUS    current
        DESCRIPTION
                        "A collection of objects providing basic setup."
        ::= { tcw242MIBGroups 2 }	
	
tcw242MonitorGroup OBJECT-GROUP
        OBJECTS {	chType, chDescription, chParam1, chOP1, chParam2, chOP2, chCoef1, chOP3, chCoef2, chUnit, chValue, chCounter, chAlarmStatus,
					alDescription, alCond1Channel, alCond1Operand, alCond1Limit, alCond1Hys, alCond1AlarmState, alCondLogic, alCond2Channel, alCond2Operand,
					alCond2Limit,alCond2Hys, alCond2AlarmState, alType, alAssigned, alActionDelay, alActionOnReturn, alAction1, alAction2, alAction3, alStatus, 
					relayState, relayPulse,
					configurationSaved,restartDevice,hardwareErr,
					funcState, funcAl
			}
        STATUS    current
        DESCRIPTION
                        "A collection of objects providing basic monitoring
                        and control of a product."
        ::= { tcw242MIBGroups 3 }	
	
tcw242TrapGroup NOTIFICATION-GROUP
        NOTIFICATIONS    {snmp-trap-notification}
        STATUS    current
        DESCRIPTION
                        "SNMP Trap Notification object."
        ::= { tcw242MIBGroups 4 }	

	
END